ECOWITT WN67 Bedienungsanleitung
5 IN 1 PROFESSIONAL
WEATHER STATION
(NO SOLAR POWERED
AND NO UV SENSOR)
Model: WN67
1
＊Please scan the QR code to read
English manual and keep it for
future reference
＊Bitte scannen Sie den QR-Code
zudeutsche Anleitung lesen und
aufbewahren füZukunftsbezug
＊Si prega di scansionare il codice
QR perleggi il manuale italiano e
conservalo perReferenza futura
Instruction manuals
https://s.ecowitt.com/46Y36A
Help
Our product is continuously changing and improving, particularly online
services and associated applications. To download the latest manual and
additional help, please contact our technical support team:
support@ecowitt.com
support.eu@ecowitt.net (EU/UK)
2
Table of Contents
1 Introduction..................................................................................................3
2 Warnings and Cautions ................................................................................ 3
3 Pre-Installation Checkout and Site Survey .................................................. 3
3.1 Pre-Installation Checkout ..................................................................... 3
3.2 Site Survey ............................................................................................3
4 Getting Started ............................................................................................. 4
4.1 Contents ................................................................................................ 4
4.2 Sensor Array Set Up ............................................................................. 5
4.2.1 Install U-bolts and mounting pole......................................................5
4.2.2 Install wind vane..............................................................................7
4.2.3 Install wind speed .......................................................................... 7
4.2.4 Install Rain Gauge ......................................................................... 8
4.2.5 Install Batteries.............................................................................. 8
4.2.6 Mount assembled outdoor sensor package .................................... 9
4.2.7 Reset Button and Transmitter LED ..............................................11
5 Specification .............................................................................................. 11
6 Maintenance...............................................................................................11
7 Troubleshooting Guide .............................................................................. 12
8 Warranty Information................................................................................ 14
3
1 Introduction
Thank you for your purchase of this Weather Station. The following user
guide provides step-by-step instructions for installation, operation, and
troubleshooting.
2 Warnings and Cautions
Warning: Any metal object may attract a lightning strike, including your
weather station mounting pole. Never install the weather station in a storm.
Warning: Installing your weather station in a high location may result in
injury or death. Perform as much of the initial check and operation on the
ground and inside a building or home. Only install the weather station on a
clear, dry day.
3 Pre-Installation Checkout and Site Survey
3.1 Pre-Installation Checkout
Before installing your weather station in the permanent location, we
recommend operating the weather station for one week in a temporary
location with easy access. This will allow you to check out all of the
functions, ensure proper operation, and familiarize yourself with the weather
station and calibration procedures. This will also allow you to test the
wireless range of the weather station.
3.2 Site Survey
Perform a site survey before installing the weather station. Consider the
following:
1. You must clean the rain gauge every few months and change the
batteries every 1 year. Provide easy access to the weather station.
2. Avoid radiant heat transfer from buildings and structures. In general,
install the sensor array at least 5’ from any building, structure, ground,
4
or rooftop.
3. Avoid wind and rain obstructions. The rule of thumb is to install the
sensor array at least four times the distance of the height of the tallest
obstruction. For example, if the building is 20’ tall, and the mounting
pole is 6’ tall, install 4 x (20 – 6)’ = 56’ away.
4. Wireless Range. The radio communication between receiver and
transmitter in an open field can reach a distance of up to 100 meters,
providing there are no interfering obstacles such as buildings, trees,
vehicles, or high voltage lines. Wireless signals will not penetrate metal
buildings. Under most conditions, the maximum wireless range is 100
meters.
5. Radio interference such as PCs, radios or TV sets can, in the worst case,
entirely cut off radio communication. Please take this into consideration
when choosing console or mounting locations. Make sure your display
console is at least five feet away from any electronic device to avoid
interference.
4 Getting Started
4.1 Contents
If components are missing from the package, or broken, or any problem
during the operation, please contact customer service to resolve the issue.
QT
Item Description
1
Outdoor Sensor with built-in: Thermo-hygrometer / Rain Gauge
/ Wind Speed Sensor/ Wind Direction Sensor.
1
Wind speed cup (to be attached to outdoor sensor body).
1
Wind vane (to be attached to outdoor sensor body).
2
U-Bolts for mounting on a pole.
4
Threaded nuts for U-Bolts (M6 size).
1
Metal mounting plate to be used with U-Bolts.
1
Wrench for M6 bolts.
1
User manual (this manual).
5
Table 1: Package content
4.2 Sensor Array Set Up
Figure 1: Sensor assembly components
1
Wind speed cups
6
Antenna
2
Wind vane
7
U-Bolts
3
Thermo- and hygro-meter
sensors
8
Battery compartment door
4
Rain collector
9
Reset button
5
Bubble level
10
LED (red) to indicate data
transmission
Table 2: Sensor assembly detailed items
4.2.1 Install U-bolts and mounting pole
Installation of the U-bolts, which are in turn used to mount the sensor
package on a pole, requires installation of an included metal plate to receive
6
the U-bolt ends. The metal plate, visible in Figure 2, has four holes through
which the ends of the two U-Bolts will fit. The plate itself is inserted in a
groove on the bottom of the unit. Note that one side of the plate has a
straight edge (which goes into the groove), the other side is bent at a
90-degree angle and has a curved profile (which will end up “hugging” the
mounting pole). Once the metal plate is inserted, remove nuts from the
U-Bolts and insert both U-bolts through the respective holes of the metal
plate as shown in Figure 2.
Figure 2: U-Bolt installation
Loosely screw on the nuts on the ends of the U-bolts. You will tighten these
later during the final mounting. The final assembly is shown in Figure 3.
Figure 3: U-Bolts and nuts installed
The plate and U-Bolts are not yet needed at this stage but doing this now
may help avoid damaging wind vane and wind speed cups later on.
7
4.2.2 Install wind vane
Push the wind vane onto the shaft on the bottom of the sensor, until it stops
moving further, as shown in figure 4.
Tighten the set screw, with a Philips screwdriver (size PH0), until the wind
van cannot be removed from the axle, as shown in figure 4. Make sure the
wind vane spins freely. The wind vane’s movement has a small amount of
friction, which is helpful in providing steady wind direction measurements.
Figure 4: Wind vane installation diagram
4.2.3 Install wind speed
Push the wind speed into the shaft as shown in figure 5.
Tighten the set screw with a screwdriver. Make sure the wind speed can spin
freely.
Figure 5: Wind speed cup installation diagram
8
4.2.4 Install Rain Gauge
Install the rain gauge funnel. Rotate clockwise to attach the funnel to the
outdoor sensor.
Figure 6: Rain gauge installation and maintenance
4.2.5 Install Batteries
Insert 2 AA batteries in the battery compartment. The LED indicator on the
back of the transmitter will turn on for four seconds and normally flash once
every 16 seconds (the sensor transmission update period).
9
Figure 7: Battery installation diagram
Note: If no LED light up or is permanently on, make sure the batteries are
inserted the correct way or a proper reset has happened. Do not install the
batteries backward. You can permanently damage the outdoor sensor
Note: We recommend 1.5V lithium batteries for cold weather climates, but
alkaline batteries are enough for most climates. We do not recommend
rechargeable batteries. They have lower voltages, they do not operate well at
wide temperature range, and do not last as long, resulting in poorer
reception.
4.2.6 Mount assembled outdoor sensor package
4.2.6.1 Before you mount
Before proceeding with the outdoor mounting detailed in this section, you
may want to skip to setup instructions in section and onwards first, while
you keep the assembled outdoor sensor package nearby (although preferably
not closer than 5 ft. from the console). This will make any troubleshooting
and adjustments easier and avoids any instance or interference related issues
from the setup.
After setup is complete and everything is working, return here for outdoor
mounting. If issues show up after outdoor mounting they are almost
certainly related to distance, obstacles etc.
Inhaltsverzeichnis
Andere ECOWITT Wetterstation Handbücher
ECOWITT
ECOWITT WH2910 Bedienungsanleitung
ECOWITT
ECOWITT HP2551CA Bedienungsanleitung
ECOWITT
ECOWITT GW1000 Bedienungsanleitung
ECOWITT
ECOWITT GW1002 Bedienungsanleitung
ECOWITT
ECOWITT WH0290 Bedienungsanleitung
ECOWITT
ECOWITT GW1100 Bedienungsanleitung
ECOWITT
ECOWITT WN190 Bedienungsanleitung
ECOWITT
ECOWITT WS3800 Bedienungsanleitung
ECOWITT
ECOWITT WH31 Bedienungsanleitung
ECOWITT
ECOWITT GW1001 Bedienungsanleitung
ECOWITT
ECOWITT HP2552 Bedienungsanleitung
ECOWITT
ECOWITT GW1003 Bedienungsanleitung
ECOWITT
ECOWITT HP1000SE PRO Bedienungsanleitung
ECOWITT
ECOWITT WN1980 Bedienungsanleitung
ECOWITT
ECOWITT WN1980 Bedienungsanleitung
ECOWITT
ECOWITT WS2910 Bedienungsanleitung
ECOWITT
ECOWITT WS69 Bedienungsanleitung
ECOWITT
ECOWITT WH5360B Bedienungsanleitung
ECOWITT
ECOWITT HP2553 Bedienungsanleitung
ECOWITT
ECOWITT HP2553 Bedienungsanleitung
Beliebte Wetterstation Handbücher anderer Marken
National Geographic
National Geographic VA Colour RC Bedienungsanleitung
Renkforce
Renkforce 1208067 Bedienungsanleitung
Levenhuk
Levenhuk Discovery Report WA40 Bedienungsanleitung
Instant Transmission
Instant Transmission MA 10410 Bedienungsanleitung
Lutron Electronics
Lutron Electronics PHB-318 Bedienungsanleitung
WAREMA
WAREMA EWFS Weather station eco Bedienungsanleitung