Edelbrock 460 Ford Bedienungsanleitung

INSTALLATION INSTRUCTIONS

Valve Spring Seat Kit

For Edelbrock Big Block Chevy and 460 Ford

Performer RPM and Performer Cylinder Heads

Catalog #5770

§Please study these instructions carefully before installing your valve spring seat kit. If you have any questions or

problems, please call our Technical Hotline at: 1-800-416-8628, 7:00 am –5:00 pm, Pacific Standard Time, Monday

through Friday or e-mail us at [email protected].

Kit Contents

16 –Spring Seat/Locator

•DESCRIPTION: The 5770 valve spring seat/locator kit is intended for applications requiring the use of hardened valve

spring seat/locators for Edelbrock Big Block Chevy and 460 Ford Performer RPM and Performer cylinder heads. The

5770 kit is designed for use with the #5745 valve springs that are standard in complete cylinder heads # 6045, 6047,

6049, 6055, 6066, and 6067. The spring seat/locator has a register for the I.D. of the inner spring that has a .795” dia.

and the seat O.D. is 1.52”. The spring seat thickness is .060”.

INSTALLATION INSTRUCTIONS

1) Remove valve covers and rocker arms.

2) Remove the valve springs. The removal of the valve springs and the installation of the spring seats should be done

on one cylinder at a time with the piston at Top Dead Center to prevent the valves from falling into the cylinder with

the valve springs removed. A proper valve spring compressor is required to remove and reinstall the valve springs.

3) Remove the valve stem seals. Be careful to not cut the sealing surface of the seal when sliding it over the valve

lock groove on the valve stem. If the valve stem seals are soft and in good condition and are removed without

being damaged, they may be reinstalled. If the seals are not in good condition or are damaged during removal,

they should be replaced.

4) Remove the .060” shim from the valve spring shim stack. To maintain the same valve spring installed height, the

spring seat should replace a .060” shim from beneath the valve spring. There may be only one .060” shim under

the valve spring or there may be a .060” shim plus some other shims needed to set the valve spring installed

height. If there are remaining shims after the .060” shim is removed, the remaining shims will be installed

underneath the valve spring seat.

5) Install the valve spring seat/locator. Any shims left after the .060” shim is removed should be installed underneath

the valve spring seat

6) Install the valve seal. The valve seal should be lubricated with a small amount of engine oil when it is installed on

the valve stem.

7) Install the valve springs.

8) Once the spring seats and valve springs have been installed on all the cylinders, install the rocker arms and valve

covers.

§PLEASE complete and mail your warranty card. Be sure to write the model number of this product in the

“Part #_______” space. THANK YOU.

Edelbrock Corporation••2700 California Street••Torrance, California 90503

2000 Edelbrock Corp. Rev. 1/01

INSTALLATION INSTRUCTION

PROOFING FORM

Date: 1/9/1

From: Jim Dralle

To: Jack Mayberry

Part No./

Description: 27602760–Ford 351C Torker Intake Manifold

Reviewed by: Date

Approved by: Date

No. of copies to be printed:

Received by: Date

F0505D

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Edelbrock Automobilteil Handbücher

Edelbrock

Edelbrock Russell 651105 Bedienungsanleitung

Edelbrock

Edelbrock Quiet-Flo 1791 Bedienungsanleitung

Edelbrock

Edelbrock Performer 70011 Technisches Handbuch

Edelbrock

Edelbrock 262-400 Bedienungsanleitung

Edelbrock

Edelbrock 66662 Bedienungsanleitung

Edelbrock

Edelbrock Nitrous Systems 71831 Bedienungsanleitung

Edelbrock

Edelbrock 3867 Bedienungsanleitung

Edelbrock

Edelbrock 65003 Bedienungsanleitung

Edelbrock

Edelbrock 1713 Bedienungsanleitung

Edelbrock

Edelbrock 5426 Bedienungsanleitung

Edelbrock

Edelbrock 7107 Bedienungsanleitung

Edelbrock

Edelbrock 66092 Bedienungsanleitung

Edelbrock

Edelbrock 71850 Bedienungsanleitung

Edelbrock

Edelbrock Performer-Plus 2172 Bedienungsanleitung

Edelbrock

Edelbrock 65012 Bedienungsanleitung

Edelbrock

Edelbrock 6564 Bedienungsanleitung

Edelbrock

Edelbrock 4500 Series Carbs Bedienungsanleitung

Edelbrock

Edelbrock 68712 Bedienungsanleitung

Edelbrock

Edelbrock 5250 Bedienungsanleitung

Edelbrock

Edelbrock 66642 Bedienungsanleitung

Edelbrock

Edelbrock Performer 3764 Bedienungsanleitung

Edelbrock

Edelbrock 65692 Bedienungsanleitung

Edelbrock

Edelbrock 5787 Bedienungsanleitung

Edelbrock

Edelbrock 5713 Bedienungsanleitung

Beliebte Automobilteil Handbücher anderer Marken

Dakota Digital

Dakota Digital 650277 Bedienungsanleitung

bosal

bosal 037031 Bedienungsanleitung

Vintage Air

Vintage Air 571063 Bedienungsanleitung

GFB

GFB EX38 Bedienungsanleitung

bosal

bosal 028091 Bedienungsanleitung

Dodge

Dodge 8W-43 Kurzanleitung

ICI

ICI Magnum FBM10DGN Bedienungsanleitung

Volant Perfomance

Volant Perfomance 19435 Bedienungsanleitung

BENDIX

BENDIX GEN 4 GEN 5 ABS Bedienungsanleitung

Vintage Air

Vintage Air 571065 Bedienungsanleitung

Rugged Ridge

Rugged Ridge 11503.13 Bedienungsanleitung

BENDIX

BENDIX CYCLONE DURADRAIN TRAILER WATER Bedienungsanleitung

Porsche

Porsche 968 - ASSEMBLY INSPECTION PROCEDURE AND MAINTENANCE... Leitfaden

Sumitomo

Sumitomo FINE CYCLO FC-A 15 G Bedienungsanleitung

Toshiba

Toshiba 48-1250 A Bedienungsanleitung

aldes

aldes EHT2 Bedienungsanleitung

Go Rhino

Go Rhino 24371T Bedienungsanleitung

BBK

BBK 18950 Bedienungsanleitung