Edelbrock Russell 651105 Bedienungsanleitung

Inhaltsverzeichnis

Andere Edelbrock Automobilteil Handbücher

Edelbrock

Edelbrock 7798 Bedienungsanleitung

Edelbrock

Edelbrock 3722 Bedienungsanleitung

Edelbrock

Edelbrock Performer-Plus 2201 Bedienungsanleitung

Edelbrock

Edelbrock 68722 Bedienungsanleitung

Edelbrock

Edelbrock 2760 Bedienungsanleitung

Edelbrock

Edelbrock Performer Series 8059 Bedienungsanleitung

Edelbrock

Edelbrock Water Pump Gasket Kit 7522 Bedienungsanleitung

Edelbrock

Edelbrock CHEVROLET V8 302-400 C.I.D. Bedienungsanleitung

Edelbrock

Edelbrock 68932 Bedienungsanleitung

Edelbrock

Edelbrock 5486 Bedienungsanleitung

Edelbrock

Edelbrock 2186 Bedienungsanleitung

Edelbrock

Edelbrock 1997 Bedienungsanleitung

Edelbrock

Edelbrock 2103 Gebrauchsanweisung

Edelbrock

Edelbrock 6700 Bedienungsanleitung

Edelbrock

Edelbrock Performer 7162 Bedienungsanleitung

Edelbrock

Edelbrock 68792 Bedienungsanleitung

Edelbrock

Edelbrock 97383 Bedienungsanleitung

Edelbrock

Edelbrock 66642 Bedienungsanleitung

Edelbrock

Edelbrock 3811 Bedienungsanleitung

Edelbrock

Edelbrock 9300 Betriebsanleitung

Edelbrock

Edelbrock 3824 Bedienungsanleitung

Edelbrock

Edelbrock 4500 Series Carbs Bedienungsanleitung

Edelbrock

Edelbrock Turbocharger 15012 Bedienungsanleitung

Edelbrock

Edelbrock 6500 Bedienungsanleitung

Beliebte Automobilteil Handbücher anderer Marken

Dakota Digital

Dakota Digital 650277 Bedienungsanleitung

bosal

bosal 037031 Bedienungsanleitung

Vintage Air

Vintage Air 571063 Bedienungsanleitung

GFB

GFB EX38 Bedienungsanleitung

bosal

bosal 028091 Bedienungsanleitung

Dodge

Dodge 8W-43 Kurzanleitung

ICI

ICI Magnum FBM10DGN Bedienungsanleitung

Volant Perfomance

Volant Perfomance 19435 Bedienungsanleitung

BENDIX

BENDIX GEN 4 GEN 5 ABS Bedienungsanleitung

Vintage Air

Vintage Air 571065 Bedienungsanleitung

Rugged Ridge

Rugged Ridge 11503.13 Bedienungsanleitung

BENDIX

BENDIX CYCLONE DURADRAIN TRAILER WATER Bedienungsanleitung

Porsche

Porsche 968 - ASSEMBLY INSPECTION PROCEDURE AND MAINTENANCE... Leitfaden

Sumitomo

Sumitomo FINE CYCLO FC-A 15 G Bedienungsanleitung

Toshiba

Toshiba 48-1250 A Bedienungsanleitung

aldes

aldes EHT2 Bedienungsanleitung

Go Rhino

Go Rhino 24371T Bedienungsanleitung

BBK

BBK 18950 Bedienungsanleitung

©

2006 Edelbrock Corporation

Brochure No. 63-651105

Catalog #651105

Rev. 6/06 - BC/mc

MODIFICATION INSTRUCTIONS

Required for 2005-2006 Pontiac GTO (6.0L LS2)

Russell Fuel Hose Kit

Catalog #651105

Please study these instructions carefully before installing your new Fuel Hose Kit. If you have any questions, please call

our Technical Hotline at: 1-800-416-8628, 7:00 am to 5:00 pm, Monday - Friday, Pacific Standard Time or e-mail us

at [email protected].

MODICATION PROCEDURE

3. Mark hose 1” from end and wrap masking or

strapping tape tightly around hose at cut point to

minimize fraying. Hold hose in vise to cut. Hose

can be cut with a pneumatic cutoff wheel or

hacksaw. Cut as straight and square as possible.

Remove tape after cutting hose

.

IMPORTANT NOTE:

Proper installation is the responsibility of the installer. Improper installation will void warranty and may

result in poor performance and engine or vehicle damage.

NOTE: Due to a difference in engine fuel inlet location, it is necessary to shorten the Russell Fuel Hose 1” for proper

fitment on 2005-2006 (6.0L LS2) models. Please follow the steps below to accomplish this:

1. Hold red socket feature of either hose end in a

vise (with soft jaws or a rag) and unscrew blue

nipple assembly from socket (counter-clockwise)

using a proper-sized chrome SAE wrench.

2. Remove socket from vise and then remove socket

from hose by pulling and twisting clockwise. 4. Hold socket in vise and push hose into socket

while turning counter-clockwise. Make sure

socket is seated against end of hose.

©

2006 Edelbrock Corporation

Brochure No. 63-651105

Catalog #651105

Rev. 6/06 - BC/mc

5. Apply assembly lube (motor oil, etc.) to threads on

nipple assembly and in socket. Insert nipple into

socket/hose and start threads by hand

(clockwise). Turn nipple with wrench until there is

less than 1/16” between nipple hex and socket.

Edelbrock Corporation, 2700 California St., Torrance, CA 90503

Tech Line: 800-416-8628

Office: 310-781-2222

E-Mail: [email protected]

6. Flush hose with solvent or soapy water and blow

clean with compressed air or let air dry.

7. Install on vehicle and turn key on to pressurize fuel

system (Do not start engine). Check for leaks.