Edelbrock Cat-Back Exhaust System 5714 Bedienungsanleitung

Catalog #5714

Page 1 of 2 Brochure #63-5714

Rev. 7/06 - KS/DA/mc

EDELBROCK CAT-BACK EXHAUST SYSTEM

For 2006 Dodge Ram, 1500 Quad Cab,

5.7L Hemi V8, 2 & 4 WD

Catalog #5714

INSTALLATION INSTRUCTION

Please study these instructions carefully before installing your new Cat-Back Exhaust System. If you have any questions,

contact our Technical Hotline at: 1-800-416-8628 from 7 am - 5 pm, Monday through Friday, Pacific Standard Time

or e-mail us at [email protected].

SUGGESTED TOOLS FOR INSTALLATION:

❑3/8" ratchet with deep SAE and metric sockets

❑9/16” and 15mm wrenches

❑Jackstands and jack

❑Liquid penetrant and rubber lubricant

DISASSEMBLY

1. Raise vehicle and support with proper

jackstands for the weight, leaving the

suspension hanging.

2. Use caution around hot exhaust systems to

avoid burns.

3. Use penetrating oil on all nuts and bolts.

4. Remove the bolts and clamps from the system

and lubricate the rubber hangers to ease

removal.

5. Use a long pry bar to pull the rubber hangers off

of the pipe hangers.

6. Remove the old system. In some cases, you will

find it easier to cut the overaxle pipe to remove

it.

ASSEMBLY

1. Clamp the intermediate pipe (#25-3250) to the

catalytic converter with a 3” band clamp and

just snug the clamp at this time. Slide hanger

clamp assembly (#23-4083) onto intermediate

pipe and engage wire into original front rubber

isolator. Leave clamp loose at this time.

WARNING: Exhaust gas contains carbon monoxide, a deadly invisible gas. Correct any leaks before

driving!

IMPORTANT NOTE:

Proper installation is the responsibility of the installer. Improper installation will void warranty and may

result in poor performance and engine or vehicle damage.

2. Install hanger clamp assembly #23-4084 into the

second I-pipe isolator on frame.

3. Slip the muffler onto the intermediate pipe with a

3” band clamp on the front. Inlet of muffler is

stamped in the nipple.

4. Install hanger clamp assembly (#23-4085) onto

outlet end of muffler, engage hangers into the

stock rubber isolators and slip it onto the muffler

outlet. Slip the overaxle pipe over the rear end

and into the muffler outlet.

5. Install hanger clamp assembly (#23-4086) onto

rear of the overaxle pipe and engage into factory

isolator.

6. Install tailpipe and snug clamp.

7. Working from the front of the system, align and

tighten each pipe from the cat-back.

8. Check for clearance to body, frame, and driveline

as you tighten and align the system from front to

rear.

9. Check for leaks and correct, if any are found.

INSTALLATION INSTRUCTIONS

Catalog #5714

Page 2 of 2 Brochure #63-5714

Rev. 7/06 - KS/DA/mc

KIT CONTENTS

CATALOG #5714

WARNING: Support your vehicle with proper

jackstands or ramps rated for the total

vehicle weight. Place stands so that the rear

axle is allowed to hang free for easy system

removal.

WARNING: These cat-back systems are

engineered to fit vehicles with stock catalytic

converters or equivalent replacements. If

your original system has been modified,

Edelbrock will not warranty fit or

performance.

Overaxle Pipe Assembly

Intermediate Pipe Assembly

Hanger Clamp Assembly

SDT Series Muffler #55725

Qty Part # Description

❑125-3250 Intermediate Pipe

❑1 25-55725 Muffler

❑123-3251 Overaxle Pipe Assembly

❑125-3157 Tail Pipe

Band Clamp

Tail Pipe Assembly

Edelbrock Corporation, 2700 California Street, Torrance, CA 90503

Tech Line: 1-800-416-8628

E-mail: [email protected]

Qty Part # Description

❑246-6612 3” Band Clamps

❑123-4083 I-Pipe Hanger Clamp Assembly*

❑123-4084 I-pipe Hanger Clamp Assembly*

❑123-4085 Muffler Hanger Clamp Assembly

❑123-4086 Tail Pipe Hanger Clamp Assembly*

*Not Shown.

Andere Edelbrock Automobilteil Handbücher

Edelbrock

Edelbrock 5752 Bedienungsanleitung

Edelbrock

Edelbrock 6661 Bedienungsanleitung

Edelbrock

Edelbrock 5724 Bedienungsanleitung

Edelbrock

Edelbrock 2980 Bedienungsanleitung

Edelbrock

Edelbrock 5758 Bedienungsanleitung

Edelbrock

Edelbrock Performer 4754 Bedienungsanleitung

Edelbrock

Edelbrock 66082 Bedienungsanleitung

Edelbrock

Edelbrock Automobile Parts Bedienungsanleitung

Edelbrock

Edelbrock 67452 Bedienungsanleitung

Edelbrock

Edelbrock 5262 Bedienungsanleitung

Edelbrock

Edelbrock 3821 Bedienungsanleitung

Edelbrock

Edelbrock 70080 Bedienungsanleitung

Edelbrock

Edelbrock 2114 Bedienungsanleitung

Edelbrock

Edelbrock 72552 Bedienungsanleitung

Edelbrock

Edelbrock 6876 Bedienungsanleitung

Edelbrock

Edelbrock 4100 Series Bedienungsanleitung

Edelbrock

Edelbrock 5292 Bedienungsanleitung

Edelbrock

Edelbrock 351-M/400 Bedienungsanleitung

Edelbrock

Edelbrock Russell R08364 Bedienungsanleitung

Edelbrock

Edelbrock 4250 Bedienungsanleitung

Edelbrock

Edelbrock 68952 Bedienungsanleitung

Edelbrock

Edelbrock 70028 Bedienungsanleitung

Edelbrock

Edelbrock 77509 Bedienungsanleitung

Edelbrock

Edelbrock 66592 Bedienungsanleitung

Beliebte Automobilteil Handbücher anderer Marken

Dakota Digital

Dakota Digital 650277 Bedienungsanleitung

bosal

bosal 037031 Bedienungsanleitung

Vintage Air

Vintage Air 571063 Bedienungsanleitung

GFB

GFB EX38 Bedienungsanleitung

bosal

bosal 028091 Bedienungsanleitung

Dodge

Dodge 8W-43 Kurzanleitung

ICI

ICI Magnum FBM10DGN Bedienungsanleitung

Volant Perfomance

Volant Perfomance 19435 Bedienungsanleitung

BENDIX

BENDIX GEN 4 GEN 5 ABS Bedienungsanleitung

Vintage Air

Vintage Air 571065 Bedienungsanleitung

Rugged Ridge

Rugged Ridge 11503.13 Bedienungsanleitung

BENDIX

BENDIX CYCLONE DURADRAIN TRAILER WATER Bedienungsanleitung

Porsche

Porsche 968 - ASSEMBLY INSPECTION PROCEDURE AND MAINTENANCE... Leitfaden

Sumitomo

Sumitomo FINE CYCLO FC-A 15 G Bedienungsanleitung

Toshiba

Toshiba 48-1250 A Bedienungsanleitung

aldes

aldes EHT2 Bedienungsanleitung

Go Rhino

Go Rhino 24371T Bedienungsanleitung

BBK

BBK 18950 Bedienungsanleitung