Edge-Core ECIS4500 Series Bedienungsanleitung

Quick Installation Guide

www.edge-core.com

Industrial Gigabit Ethernet Switch

ECIS4500 Series

Quick Start Guide

ECIS4500 6T2F Industrial Gigabit Ethernet Switch

Industrial Gigabit Ethernet Switch

with 6 10/100/1000BASE-T ports,

2 10/100/1000BASE-X SFP slots

ECIS4500 8T2F Industrial Gigabit Ethernet Switch

Industrial Gigabit Ethernet Switch

with 8 10/100/1000BASE-T ports,

2 10/100/1000BASE-X SFP slots

ECIS4500 6T4F Industrial Gigabit Ethernet Switch

Industrial Gigabit Ethernet Switch

with 6 10/100/1000BASE-T ports,

4 10/100/1000BASE-X SFP slots

ECIS4500 4P4T Industrial Gigabit Ethernet Switch

Industrial Gigabit Ethernet Switch

with 4 10/100/1000BASE-T PoE+ ports,

4 10/100/1000BASE-T SFP slots

ECIS4500 4P2T2F Industrial Gigabit Ethernet Switch

Industrial Gigabit Ethernet Switch

with 4 10/100/1000BASE-T PoE+ ports,

2 10/100/1000BASE-T SFP ports,

plus 2 10/100/1000BASE-X SFP slots

ECIS4500 8P4F Industrial Gigabit Ethernet Switch

Industrial Gigabit Ethernet Switch

with 8 10/100/1000BASE-T PoE+ ports,

4 10/100/1000BASE-X SFP slots

ECIS4500 8P2T4F Industrial Gigabit Ethernet Switch

Industrial Gigabit Ethernet Switch

with 8 10/100/1000BASE-T PoE+ ports,

2 10/100/1000BASE-T SFP ports,

plus 4 10/100/1000BASE-X SFP slots

E092017-AP

ECIS4500 Quick Installation Guide

ECIS4500 Series Industrial switch

Quick Installation Guide

Overview

The managed Ethernet switch solutions are designed for supporting standard industrial

applications. The managed switches are easier to prioritize, partition, and organize user’s network,

providing a more reliable and better quality services.

Package Checklist

Please verify the box contains the following items:

Item Quantity

Management Ethernet switch 1

Console Cable* 1

Wall-mount plates 2

DIN-rail clip 1

M3 Screws (for the wall mount plates and DIN clip) 4

DC power terminal block 1

RJ-45 Ethernet port dust cover Same as RJ-45 port number

SFP Ethernet port dust cover Same as SFP port number

* Please use the console cable in the accessory to configure switch in console mode.

ECIS4500 Quick Installation Guide

Safety Instructions

Overview

When a fiber connection is removed during installation, testing, servicing or an active fiber is broken,

ocular exposure to optical energy may be potentially hazardous, depending on the laser output

power.

The primary hazards of exposing laser radiation from an optical-fiber communication systems are:

●

Damage to eyes from accidental exposure to a beam emitted by a laser source.

●

Damage to eyes from viewing the connector that attaches to a broken fiber or an energized fiber.

Technical Specifications

Model ECIS4500 Series Industrial Switch

Ethernet Copper RJ-45 Ports 10/100/1000 Mbps speed auto- negotiation MDI/MDIX Auto-crossover

SFP (pluggable Ports) 100/1000BASE SFP slot

Fiber port connector LC typically for fiber (depends on module)

Power ECIS4500-6T2F ECIS4500-4P4T

ECIS4500-8T2F ECIS4500-4P2T2F

ECIS4500-6T4F ECIS4500-8P4F

ECIS4500-8P2T4F

Power input Redundant input terminals; reverse power protection

Input voltage range 12-58 VDC 12-58 VDC (with PoE: 46-58 VDC)

Maximum Power consumption 17 Watts Without PoE: 14 Watts,

With PoE: 265 Watts

Environmental and Compliances

Operating temperature -40 to +75°C (cold startup at -40°C)

Storage temperature -40 to +85°C

Humidity 5 to 95% RH (non-condensing)

Mechanical

Ingress protection IP30

Dimension

(without DIN rail clip) 154mm (H) x 109mm (D) x 60mm (W) 154mm (H) x 128mm (D) x 77mm (W)

Weight 1056 g 1410 g

Installation option DIN-rail and wall mounting

ECIS4500 Quick Installation Guide

Appearance

ECIS4500-6T4F/8T2F/6T2F

ECIS4500-8P2T4F/8P4F/4P2T2F/4P4T

ECIS4500 Quick Installation Guide

Faceplate

ECIS4500-8T2F ECIS4500-6T2FECIS4500-6T4F

ECIS4500-8P2T4F ECIS4500-8P4F ECIS4500-4P2T2F ECIS4500-4P4F

ECIS4500 Quick Installation Guide

DIN-rail mounting

Mounting steps:

1. Screw the din-clip with screws in the accessory kit.

2. Hook the unit onto the din-rail.

3. Push the bottom of the unit towards the din-rail until it locks in place.

Wall mounting

Mounting steps:

1. Screw the wall-mount brackets with screws in the accessory kit.

The graph is for all series

ECIS4500 Quick Installation Guide

Ethernet Interface (RJ-45 Ethernet)

The switch provides two types of Ethernet interfaces: electrical (RJ-45) and optical (SFP) interfaces.

Connecting the Ethernet interface via RJ-45:

●

To connect the switch to a PC, use straight-through or cross-over Ethernet cables,

●

To connect the switch to an Ethernet device, use UTP (Unshielded Twisted Pair) or STP (Shielded

Twisted Pair) Ethernet cables.

The pin assignment of RJ-45 connector is shown in the following figure and table.

ECIS4500-6T2F/6T4F/8T2F

ECIS4500-8P2T4F/8P4F/4P2T2F/4P4T

Ethernet Interface (Fiber, SFP)

For both 100/1000 Mbps fiber speed connections, the SFP slots are available. The SFP slot accepts the

fiber transceivers that typically have an LC connector.

The fiber transceivers have options of multimode, single mode, long-haul or special-application

transceivers.

DANGER: Never attempt to view optical connectors that might be emitting laser energy.

Do not power up the laser product without connecting the laser to the optical fiber and

putting the dust cover in position, as laser outputs will emit infrared laser light at this point.

Pin Assignment PoE Assignment

1,2 T/Rx+,T/Rx- Positive VPort

3,6 T/Rx+,T/Rx- Negative VPort

4,5 T/Rx+,T/Rx- X

7,8 T/Rx+,T/Rx- X

Pin Assignment

1,2 T/Rx+,T/Rx-

3,6 T/Rx+,T/Rx-

4,5 T/Rx+,T/Rx-

7,8 T/Rx+,T/Rx-

ECIS4500 Quick Installation Guide

Connecting Power Terminal Block

The switch can be powered from two power supplies (input range 12V – 58V). Insert the

positive and negative wires into V+ and V- contacts on the terminal block respectively and

tighten the wire-clamp screws to prevent the wires from being loosened.

Note: 1. The DC power should be connected to a well-fused power supply.

ECIS4500-6T4F/6T2F/8T2F

ECIS4500-8P2T4F/8P4F/4P2T2F/4P4F

First Power Supply Second Power Supply

First Power Supply

Second Power Supply

ECIS4500 Quick Installation Guide

Alarm Relay and Ground

The alarm relay output contacts are in the middle of the DC terminal block connector as shown in the

figure below.

The alarm relay out is “Normal Open”, and it will be closed when detected any predefined failure such

as power failures or Ethernet link failures.

The relay output with current carrying capacity of 0.5 A @ 24 VDC

Console Connection

The Console port is for local management by using a terminal emulator or a computer with terminal

emulation software.

●

DB9 connector connect to computer COM port

●

Baud rate: 115200bps

●

8 data bits, 1 stop bit

●

None Priority

●

None flow control

Ground Connector

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Edge-Core Netzwerk-Router Handbücher

Edge-Core

Edge-Core ES4624-SFP Programmierhandbuch

Edge-Core

Edge-Core AS4630-54PE Bedienungsanleitung

Edge-Core

Edge-Core ECS4610-24F Bedienungsanleitung

Edge-Core

Edge-Core ES4612 Programmierhandbuch

Edge-Core

Edge-Core ECS3610-28T Bedienungsanleitung

Edge-Core

Edge-Core ES4625 Bedienungsanleitung

Edge-Core

Edge-Core DCS209 Bedienungsanleitung

Edge-Core

Edge-Core ES3526XA Bedienungsanleitung

Edge-Core

Edge-Core VR-100 Bedienungsanleitung

Edge-Core

Edge-Core ECS3510-28T Programmierhandbuch

Edge-Core

Edge-Core EWS100 Bedienungsanleitung

Edge-Core

Edge-Core ECS4510-28F Bedienungsanleitung

Edge-Core

Edge-Core ES4626 Bedienungsanleitung

Edge-Core

Edge-Core ECS3810-26T Bedienungsanleitung

Edge-Core

Edge-Core ES3528M-PoE Bedienungsanleitung

Edge-Core

Edge-Core ES3528MV2 Programmierhandbuch

Edge-Core

Edge-Core AS4630-54TE Bedienungsanleitung

Edge-Core

Edge-Core AS5710-54X Bedienungsanleitung

Edge-Core

Edge-Core ECS4510-12PD Bedienungsanleitung

Edge-Core

Edge-Core ECS4620-28F Bedienungsanleitung

Edge-Core

Edge-Core ECS4100-26TX Bedienungsanleitung

Edge-Core

Edge-Core AS7512-32X Bedienungsanleitung

Edge-Core

Edge-Core AS9516-32D Bedienungsanleitung

Edge-Core

Edge-Core AS5835-54T Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise