Edge-Core EWS100 Bedienungsanleitung

EWS100

Wireless LAN Controller

Quick Installation Guide

EWS100 ENGLISH

This document is protected by USA copyright laws and other laws and is the property of

Edgecore Networks Corporation. You may not copy, reproduce, distribute, publish,

display, perform, or modify any part of this publication in any form or by any means

without prior written permission from Edgecore Networks Corporation. You may not

alter or remove any copyright or other notice from copies of the content. All other

brand and product names are claimed or registered marks of their respective

companies or organizations.

FCC Caution

This equipment has been tested and proven to comply with the limits for a class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and receiver.

 Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

 Consult the dealer or an experienced radio/TV technician for help.

Quick Installation Guide

EWS100 ENGLISH

①

Package Contents

1. EWS100 x 1

2. Quick Installation Guide (QIG) x 1

3. Ethernet Cable x 1

4. Power Adapter (12V/1A) x 1

Preface

This Quick Installation Guide provides

instructions on how to install the EWS100

and to get the network up and running with

basic configurations.

Quick Installation Guide

EWS100 ENGLISH

②

System Overview

Front Panel

LED Indicators:

 Power: Steady green light indicates a proper connection to a power source.

 Status: Blinking green light indicates that the system is in the process of initializing. It turns

steady-on when the system is in operation state.

Back Panel

1. Restart / Reset Button: To restart the system, press and hold the button for more than 5 seconds and

release the button after the status LED on the front panel starts blinking. To reset the system to factory

default settings, press and hold the button for more than 10 seconds and release the button after the

status LED turns from blinking to off.

2. Port5 – Port2: RJ-45 ports (10/100/1000 Base-T) for the downlink Ethernet connection (LAN4 – LAN1).

Downlink devices such as APs and client PCs can be attached here. Note: In the Web Management

Interface, there is an option to switch the role of Port2 from the downlink port (LAN1) to the uplink port

(WAN2).

3. Port1: RJ-45 port (10/100/1000 Base-T) for the uplink Ethernet connection (WAN1). It is the default port

that can pass all traffic to an uplink device, such as the xDSL modem / router.

4. USB: USB port reserved for future use.

5. Power: Button to power on/off the system.

6. Power Socket: Socket to attach 12V/1A power adapter.

Do not power off the device after restarting or resetting the device. The process takes approximately

two minutes to complete.

Quick Installation Guide

EWS100 ENGLISH

③

Hardware Installation

Follow these steps to install EWS100:

1. Connect the power adapter to the power socket on the back panel of the EWS100. The Power LED will

turn steady green, indicating that the power source is properly connected.

2. Connect the WAN1 (Port1) of the EWS100 to a switch of an internal network, or directly to the ISP modem /

router, using an Ethernet cable. The LED of this port will be on, indicating a proper connection.

3. Connect an administrative PC directly to a LAN port of the EWS100 via an Ethernet cable. The LED of this

LAN port will be on, indicating a proper connection.

4. Lastly, access points can be connected to the switch, or directly to the LAN ports of the EWS100.

Quick Installation Guide

EWS100 ENGLISH

④

Getting Started

< System Overview >

Edgecore EWS100 is a Wireless LAN Controller that supports user management, AP management, and other

management functions. The following network diagram is a deployment example where the EWS100 is able to

centrally manage users and wireless access points at this site.

< Web Management Interface >

The EWS100 has a web-based interface for configuration and management. Follow the steps below to access

the Web Management Interface (WMI) for the first time.

1. Connect your administrative PC directly to a LAN port of the EWS100 via an Ethernet cable. The PC

should be assigned an IP Address in the same subnet as the EWS100’s (192.168.1.0/255.255.0.0).

Quick Installation Guide

EWS100 ENGLISH

⑤

2. Launch a web browser and enter the IP Address of Default Service Zone (192.168.1.254) in the address

field.

3. After a successful login, the system prompts for the administrator to change password for security

reasons. The new password needs to be at least 6 characters long and include at least one alphabet and

one number.

Quick Installation Guide

EWS100 ENGLISH

⑥

4. Welcome to System Main Menu page will appear after a successful login with the new password.

Quick Installation Guide

EWS100 ENGLISH

⑦

Basic Configurations

< Setup Wizard >

Use Setup Wizard (the button on the top right corner)

to set up the EWS100 with basic configurations for

the first time:

Step 1: General

 Select a time zone to set up the system time.

 Click Next to continue.

Step 2: WAN1 Interface

 Select a proper type of uplink connection for

WAN1 interface: Static, Dynamic, or PPPoE.

 Click Next to continue.

Step 3: Local User Account (Optional Step)

Create a new user account in the Local account

database. You can click Skip to go directly to Step 4.

 Enter the Username (e.g. “testuser) and

Password (e.g. “testuser”) to create a new local

account.

 Click Next to continue.

 More local accounts can be added by clicking the

Back button in Step 4.

Step 4: Confirm and Restart

 Click Finish to save current settings and restart

the system.

 A confirmation dialog box will then appear. Click

OK to continue.

Quick Installation Guide

EWS100 ENGLISH

⑧

 A Confirm and Restart message will appear

during the restarting process. Please do not

interrupt the system until the Administrator Login

Page appears.

 Note:

The system will try to reach a DNS

server at this stage. Therefore, it may

take a longer time if the configured

DNS cannot be found.

 The system restart process is completed when

the following Administrator Login Page

appears.

Andere Handbücher für EWS100

Inhaltsverzeichnis

Andere Edge-Core Netzwerk-Router Handbücher

Edge-Core

Edge-Core ES4624-SFP Programmierhandbuch

Edge-Core

Edge-Core ECS4510-28F Bedienungsanleitung

Edge-Core

Edge-Core ECS3510-28T Programmierhandbuch

Edge-Core

Edge-Core ECS4510-12PD Bedienungsanleitung

Edge-Core

Edge-Core AS7316-26XB Bedienungsanleitung

Edge-Core

Edge-Core ECS4210-12P Bedienungsanleitung

Edge-Core

Edge-Core AS5835-54T Bedienungsanleitung

Edge-Core

Edge-Core ECS3610-28T Bedienungsanleitung

Edge-Core

Edge-Core ECS4610-24F Bedienungsanleitung

Edge-Core

Edge-Core AS7712-32X Bedienungsanleitung

Edge-Core

Edge-Core ES3628C Programmierhandbuch

Edge-Core

Edge-Core AS5835-54X Bedienungsanleitung

Edge-Core

Edge-Core AS7946-30XB Bedienungsanleitung

Edge-Core

Edge-Core ES4624-SFP Programmierhandbuch

Edge-Core

Edge-Core AS4630-54PE Bedienungsanleitung

Edge-Core

Edge-Core ES3526XA Bedienungsanleitung

Edge-Core

Edge-Core AS5710-54X Bedienungsanleitung

Edge-Core

Edge-Core ES3528MV2 Programmierhandbuch

Edge-Core

Edge-Core ECIS4500 Series Bedienungsanleitung

Edge-Core

Edge-Core AS4630-54TE Bedienungsanleitung

Edge-Core

Edge-Core ECS4310-26T Bedienungsanleitung

Edge-Core

Edge-Core ECS4620-28F Bedienungsanleitung

Edge-Core

Edge-Core ES3510 Programmierhandbuch

Edge-Core

Edge-Core ES4625 Programmierhandbuch

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung