Edge-Core ECS3510-26P Bedienungsanleitung

Installation Guide

www.edge-core.com

ECS3510-26P

26-Port Layer 2

Gigabit Ethernet Switch

Installation Guide

ECS3510-26P MANAGED 26-PORT FE POE SWITCH

Layer 2 Gigabit Ethernet Switch,

with 24 10/100BASE-T (RJ-45) PoE Ports,

and 2 Gigabit Combination Ports (RJ-45/SFP)

E072013-KS-R01

149100000220A

– 3 –

How to Use This Guide

This guide includes detailed information on the switch hardware, including

network ports, power, cabling requirements, as well as plug-in modules and

transceivers. This guide also provides general installation guidelines and

recommended procedures. To deploy this switch effectively and ensure trouble-

free operation it is recommended to first read the relevant sections in this guide so

that you are familiar with all its hardware components.

Who Should Read This

Guide?

This guide is for network administrators and support personnel that install, operate,

and maintain network equipment. The guide assumes a basic working knowledge

of LANs (Local Area Networks) and can be read by both those that are new to

network equipment, or those with more experience.

How This Guide is

Organized

The organization of this guide is based on the switch’s main hardware components.

Each chapter includes information about a specific component with relevant

specifications and installation procedures. A switch overview section is also

provided.

For Users New to Switches

— If you are new to network switches, it is

recommended that you first read all chapters in this guide before installing the

switch.

For Experienced Users

— If you are already familiar with installing and operating

network switches, the Switch Description and Installation Overview chapters

provide you with enough information to install the switch. Other chapters can be

left for reference, when needed.

The guide includes these chapters:

◆Chapter 1 - Switch Description — Includes a switch overview, key component

identification, and key technical specifications.

◆Chapter 2 - Installation Overview — Includes details of the package contents

and an outline of switch installation tasks.

◆Chapter 3 - Switch Chassis — Includes switch chassis rack installaion, and

system cooling requirements.

◆Chapter 4 - Power and Grounding — Includes information on AC power

requirements, switch grounding, and powering on the switch.

How to Use This Guide

– 4 –

◆Chapter 5 - Port Connections — Includes information on network interfaces,

installing optional transceivers, and cabling specifications.

◆Chapter 6 - Switch Management — Connecting to the switch for management,

and information on the system status LEDs.

◆Appendix A - Troubleshooting — Information for troubleshooting switch

installation and operation.

Documentation

This guide focuses on switch hardware and installation, it does not cover software

configuration of the switch. For specific information on how to operate and use the

management functions of the switch, see the following guide:

Management Guide

For all safety information and regulatory statements, see the following document:

Quick Start Guide

Safety and Regulatory Information

Conventions The following conventions are used throughout this guide to show information:

Note:

Emphasizes important information or calls your attention to related features

or instructions.

Caution:

Alerts you to a potential hazard that could cause loss of data, or damage

the system or equipment.

Warning:

Alerts you to a potential hazard that could cause personal injury.

Revision History This section summarizes the changes in each revision of this guide.

July 2013 Revision

This is the first revision of this guide.

– 5 –

Contents

How to Use This Guide 3

Contents 5

Figures 7

Tables 8

1 Switch Description 9

Overview 9

Key Hardware Components 10

Key Technical Specifications 12

2 Installation Overview 14

Package Contents 14

Switch Installation Tasks 15

3 Switch Chassis 19

General Installation Guidelines 19

How to Install the Switch in a Rack 20

Rack-Mounting Items 20

Rack-Mount Procedure 20

How to Install the Switch on a Shelf or Desktop. 22

Switch Cooling Requirements 23

Rack Cooling 23

4 Power and Grounding 25

Switch Power Supply 25

Grounding the Chassis 26

How to Connect to AC Power 27

5 Port Connections 29

Cable Labeling and Connection Records 30

Contents

– 6 –

Understanding the Port Status LEDs 31

How to Install an SFP Transceiver 32

How to Connect to Twisted-Pair Copper Ports 34

Copper Cabling Guidelines 34

10/100BASE-TX Pin Assignments 34

1000BASE-T Assignments 35

Power-over-Ethernet 36

Connection Procedure 36

How to Connect to SFP Fiber Optic Ports 38

Connection Procedure 39

6 Switch Management 41

Understanding the System Status LEDs 42

How to Connect to the Console Port 43

How to Reset the Switch 45

A Troubleshooting 46

Diagnosing LED Indicators 46

System Self-Diagnostic Test Failure 46

Power Problems 47

Installation 47

In-Band Access 47

Index 48

– 7 –

Figures

Figure 1: Front Panel ECS3510-26P 10

Figure 2: Rear Panel 11

Figure 3: Installing the Switch in a Rack 15

Figure 4: Connecting AC Power 16

Figure 5: System LEDs 17

Figure 6: Console Port 17

Figure 7: Making a Connection to an SFP Port 18

Figure 8: Attaching the Brackets 21

Figure 9: Installing the Switch in a Rack 21

Figure 10: Attaching the Adhesive Feet 22

Figure 11: Switch Cooling 23

Figure 12: AC Power Supply Socket 25

Figure 13: Grounding Terminal 26

Figure 14: AC Power Cord and Power Socket 27

Figure 15: Port Status LEDs 31

Figure 16: Inserting an SFP Transceiver into a Slot 33

Figure 17: RJ-45 Connector 35

Figure 18: Making Twisted-Pair Connections 37

Figure 19: Making a Connection to an SFP Port 39

Figure 20: System Status LEDs 42

Figure 21: Console Port 43

Figure 22: Console Port Connection 44

Figure 23: Reset Button 45

– 8 –

Tables

Table 1: Key Technical Specifications 12

Table 2: AC Power Supply Specifications 25

Table 3: Port Status LEDs 31

Table 4: Maximum Twisted-Pair Copper Cable Lengths 34

Table 5: 10/100BASE-TX MDI and MDI-X Port Pinouts 35

Table 6: 1000BASE-T MDI and MDI-X Port Pinouts 35

Table 7: Maximum Gigabit Ethernet Fiber Cable Lengths 38

Table 8: Maximum Fast Ethernet Fiber Cable Lengths 38

Table 9: System Status LEDs 42

Table 10: Console Cable Wiring 43

Table 11: Using the Reset Button 45

Table 12: Troubleshooting Chart 46

– 9 –

1Switch Description

This chapter includes these sections:

◆“Overview” on page 9

◆“Key Technical Specifications” on page 12

Overview

Thank you for choosing the ECS3510-26P switch system. Your switch is built with

leading-edge technology to deliver reliable high-performance connectivity for

your data network.

The ECS3510-26P is a Gigabit Ethernet Layer 2 switch with 24 10/100BASE-T ports,

and two Small Form Factor Pluggable (SFP) transceiver slots that operate in

combination with two 1000BASE-T ports 25~26. Further, all of the 10/100 Mbps

ports on the ECS3510-26P support both the IEEE 802.3af and IEEE 802.3at-2009 PoE

standards that enable DC power to be supplied to attached devices using wires in

the connecting Ethernet cable.

The switch also includes an SNMP-based management agent, which provides both

in-band and out-of-band access for managing the switch.

Chapter 1

| Switch Description

Overview

– 10 –

Key Hardware

Components

The switch consists of several key hardware components. This manual describes

each specific component, or related components, together with their installation

requirements and procedures in each chapter. To understand each component in

detail, refer to the relevant section.

Figure 1: Front Panel ECS3510-26P

10/100BASE-T RJ-45 Ports

The switch contains 24 10/100BASE-T RJ-45 ports that support 10/100/1000BASE-T

copper links to other devices. For more information, see “How to Connect to

Twisted-Pair Copper Ports” on page 34.

Combination SFP/RJ-45 Ports

The switch contains two combo ports made up of two Small Form Factor Pluggable

( SFP) transceiver slots that are each logically connected with one of two 1000BASE-

T RJ-45 ports. At any one time, a “combo” port can only have one of the pair, the SFP

slot or the RJ-45 port, enabled. For more information on connecting the SFP ports,

see “How to Connect to SFP Fiber Optic Ports” on page 38.

Console Port

The RJ-45 connector on the front panel far right side that is labeled “Console”

provides an out-of-band serial connection to a terminal or a PC running terminal

emulation software. The port can be used for performing switch monitoring and

configuration. For more information, see “How to Connect to the Console Port” on

page 43.

10/100BASE-T Port LEDs System LEDs

10/100BASE-T RJ-45 Ports 1-24 Combo Port LEDs

Gigabit SFP Slot / 1000BASE-T RJ-45 Combo Port 25 Mode Button

RJ-45 Console Port Gigabit SFP Slot / 1000BASE-T RJ-45 Combo Port 26

876

Andere Handbücher für ECS3510-26P

Inhaltsverzeichnis

Andere Edge-Core Schalten Handbücher

Edge-Core

Edge-Core ECS4120 Series Bedienungsanleitung

Edge-Core

Edge-Core ECS1100-5P Bedienungsanleitung

Edge-Core

Edge-Core ECS4150-28P Bedienungsanleitung

Edge-Core

Edge-Core AS6700-32X Bedienungsanleitung

Edge-Core

Edge-Core AS7712-32X Betriebsanleitung

Edge-Core

Edge-Core AS7816-64X Bedienungsanleitung

Edge-Core

Edge-Core ECS3510-52T Bedienungsanleitung

Edge-Core

Edge-Core ECS4510-52P Bedienungsanleitung

Edge-Core

Edge-Core AS7535-28XBE Bedienungsanleitung

Edge-Core

Edge-Core ECS5510-48S Bedienungsanleitung

Edge-Core

Edge-Core ECS2000-26T Bedienungsanleitung

Edge-Core

Edge-Core ES4528V-38 Programmierhandbuch

Edge-Core

Edge-Core ECS3510-28F Bedienungsanleitung

Edge-Core

Edge-Core ECS4150-54T Bedienungsanleitung

Edge-Core

Edge-Core ECS4810-12M-EUK Bedienungsanleitung

Edge-Core

Edge-Core ES3628EA Bedienungsanleitung

Edge-Core

Edge-Core Wedge-16X-AC Bedienungsanleitung

Edge-Core

Edge-Core ECS4810-12M Layer 2 Programmierhandbuch

Edge-Core

Edge-Core ES3510MA-DC Programmierhandbuch

Edge-Core

Edge-Core Direk Tronik 24/48-Port Programmierhandbuch

Edge-Core

Edge-Core ES3526YA Bedienungsanleitung

Edge-Core

Edge-Core AGR420 Bedienungsanleitung

Edge-Core

Edge-Core AS4610-30T Bedienungsanleitung

Edge-Core

Edge-Core ECS4110-52T Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung