Edge-Core ECW100 Bedienungsanleitung

ECW100

In-Wall Access Point

Quick Installation Guide

ECW100 In-Wall Access Point ENGLISH

This document is protected by USA copyright laws and other laws and is the property of

Edgecore Networks Corporation. You may not copy, reproduce, distribute, publish,

display, perform, or modify any part of this publication in any form or by any means

without prior written permission from Edgecore Networks Corporation. You may not alter

or remove any copyright or other notice from copies of the content. All other brand

and product names are claimed or registered marks of their respective companies or

organizations.

Quick Installation Guide

ECW100 In-Wall Access Point ENGLISH

FCC CAUTION

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the party responsible for compliance could void the

user's authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or

transmitter.

For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other

channels is not possible.

This device is restricted to indoor use when operated in the 5.15 to 5.25 GHz frequency range.

※FCC requires this product to be used indoors for the frequency range 5.15 to 5.25 GHz to reduce the

potential for harmful interference to co-channel Mobile Satellite systems.

IMPORTANT NOTE:

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This

equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Quick Installation Guide

ECW100 In-Wall Access Point ENGLISH

iii

CE CAUTION

Hereby, Edgecore Networks Corporation declares that the radio equipment type ECW100 is in

compliance with Directive

2014/53/EU.

Frequency Range and Transmit Power

Frequency range (MHz)

Max. transmit power (dBm)

2412-2472

19.26 dBm

5150-5250

18.22 dBm

This device is restricted to indoor use.

Input Power

Power from PoE: IEEE802.3af

Operation Temperature

0℃(32℉) to 40℃(104℉)

Model - ECW100

The device has been tested and passed the requirements of the following standards, and hence fulfills the

EMC and safety requirements of RED within the CE marking requirement.

Radio: EN 300 328 V2.1.1, EN 301 893 V2.1.1

EMC: Draft EN 301 489-1 V2.2.0, Draft EN 301 489-17 V3.2.0

EMC: EN 55032:2015 + AC:2016 Class B, EN 55024 : + A1 + A2 including the followings:

EN 61000-3-2, EN 61000-3-3,

EN 61000-4-2, EN 61000-4-3, EN 61000-4-4,

EN 61000-4-5, EN 61000-4-6, EN 61000-4-11

Safety: EN 60950-1: 2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013

Caution

This declaration is only valid for configurations (combinations of software, firmware, and hardware)

provided and supported by Edgecore Networks Corporation. The use of software or firmware not

provided and supported by Edgecore Networks Corporation may result in the equipment no longer being

compliant with the regulatory requirements.

Requirements in

AT/BE/BG/CZ/DK/EE/FR/DE/IS/IE/IT/EL/ES/CY/LV/LI/LT/LU/HU/MT/NL/NO/PL/PT/RO/SI/SK/TR/FI/SE

/CH/UK/HR. 5150MHz ~ 5350MHz is for indoor use only.

In order to ensure compliance with the exposure recommendations to electromagnetic fields, the device

should be used at a minimum distance of 20cm from the body.

Quick Installation Guide

ECW100 In-Wall Access Point ENGLISH

Taiwan NCC Statement

根據 NCC 低功率電波輻射性電機管理辦法規定:

第十二條

經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、

加大功率或變更原設計之特性及功能。

第十四條

低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即

停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通

信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。

在5.25 ~ 5.35 秭赫頻帶內操作之無線資訊傳輸設備，限於室內使用。

減少電磁波影響，請妥適使用

[警語]「電磁波曝露量 MPE 標準值 1mW/cm2，送測產品實測值為 0.124 mW/cm2」

Quick Installation Guide

ECW100 In-Wall Access Point ENGLISH

Preface

Package Contents

The EdgecoreECW100 Enterprise In-Wall Access

Point is a dual radio Wi-Fi IEEE 802.11b/g/n +

a/n/ac 2 X 2 MIMO access point. With a simplistic

yet sleek design, it can easily blend into any working

or living environment.

The compact ECW100 lays snug in a standard wall

outlet box. Its front panel features power and LAN

LED status indicators, one RJ45 LAN port, and one

RJ11 pass-through port. With both Wi-Fi and

Ethernet interfaces, it can provide wireless access

and wired LAN access simultaneously. The RJ11

ports can be used for phone connection without the

need for additional outlets.

When ECW100 coupled with the Edgecore

Controller, the ECW100 supports tunnel-based AP

management and meets all the standards

demanded in enterprise applications, including

business-grade security (802.1X, WPA and WPA2).

Multiple ESSIDs with VLAN tags can also be

configured for traffic control. In addition, it features

centralized WLAN management, which allows the

enterprises and organizations to support a wide

array of value-added applications, such as load

balancing, bandwidth control, and access control.

ECW100’s high performance, security and optimal

invisibility make it a perfect choice of wireless

connectivity for your business.

1. Edgecore ECW100 (US / EU Type) x 1

2. Cover Plate (US / EU Type) x 1

3. Screws x 2

4. Quick Installation Guide (QIG) x 1

It is recommended to keep the original

packing material for possible future shipment

when repair or maintenance is required. Any

returned product should be packed in its

original packaging to prevent damage during

delivery.

Quick Installation Guide

ECW100 In-Wall Access Point ENGLISH

System Overview

US Type

ECW100 Front ECW100 Bottom

Holes

Screw Holes.

Restart / Reset

Press once to restart the system; hold for more than 5 seconds to reset the

system to factory default settings.

Phone port (Front)

RJ-11 pass-through port (front).

LAN LED

LAN status. The LAN LED will light up when there is traffic.

Power LED

Power status. The Power LED will start blinking when the restart/reset button is

pressed. For the first 5 seconds, the LED will blink slowly (restart), and after 5

seconds, the LED will start blinking quickly (reset).

LAN port

For wired local network connection (RJ-45). An Ethernet cable can be plugged

into the LAN port.

Uplink port

For uplink connection (RJ-45). This port can be used for connecting to a PoE

controller, gateway, or the Internet directly.

Phone port (Back)

RJ-11 pass-through port (back).

Quick Installation Guide

ECW100 In-Wall Access Point ENGLISH

EU Type

ECW100 Front ECW100 Bottom

Holes

Screw Holes.

Restart / Reset

Press once to restart the system; hold for more than 5 seconds to reset the

system to factory default settings.

Phone port (Front)

RJ-11 pass-through port (front).

LAN LED

LAN status. The LAN LED will light up when there is traffic.

Power LED

Power status. The Power LED will start blinking when the restart/reset button is

pressed. For the first 5 seconds, the LED will blink slowly (restart), and after 5

seconds, the LED will start blinking quickly (reset).

LAN port

For wired local network connection (RJ-45). An Ethernet cable can be plugged

into the LAN port.

Uplink port

For uplink connection (RJ-45). This port can be used for connecting to a PoE

controller, gateway, or the Internet directly.

Phone port (Back)

RJ-11 pass-through port (back).

Quick Installation Guide

ECW100 In-Wall Access Point ENGLISH

Hardware Installation

Please follow the steps below to install the ECW100:

Step 1. Place the ECW100 at the desired location for optimized coverage.

Step 2. Connect one end of an Ethernet cable to the ECW100 uplink port, and the other end to an IEEE

802.3af-compliant PSE device, such as a PoE switch, router, or hub.

US Type

EU Type

Quick Installation Guide

ECW100 In-Wall Access Point ENGLISH

Step 3. Screw the ECW100 into the wall.

US Type

EU Type

Inhaltsverzeichnis

Andere Edge-Core Drahtloser Zugangspunkt Handbücher

Edge-Core

Edge-Core ECW5211-L Bedienungsanleitung

Edge-Core

Edge-Core EAP102 Bedienungsanleitung

Edge-Core

Edge-Core ECW7210-L Bedienungsanleitung

Edge-Core

Edge-Core EAP8518 Bedienungsanleitung

Edge-Core

Edge-Core ECWO3220 Programmierhandbuch

Edge-Core

Edge-Core MLTG-CN Bedienungsanleitung

Edge-Core

Edge-Core WA4101-Cradle Bedienungsanleitung

Edge-Core

Edge-Core ECW5211-L Bedienungsanleitung

Edge-Core

Edge-Core ECW5410-L Bedienungsanleitung

Edge-Core

Edge-Core ECWO5212-L Bedienungsanleitung

Edge-Core

Edge-Core ECW5320 Bedienungsanleitung

Edge-Core

Edge-Core EAP101 Bedienungsanleitung

Edge-Core

Edge-Core EAP101 Bedienungsanleitung

Edge-Core

Edge-Core WA6202A Bedienungsanleitung

Edge-Core

Edge-Core ECW5320 Programmierhandbuch

Edge-Core

Edge-Core EAP102 Bedienungsanleitung

Edge-Core

Edge-Core ECWO4320 Bedienungsanleitung

Edge-Core

Edge-Core ECW5110-L Bedienungsanleitung

Edge-Core

Edge-Core ECWO5213-L Bedienungsanleitung

Edge-Core

Edge-Core MLTG-360 Bedienungsanleitung

Edge-Core

Edge-Core EAP111 Bedienungsanleitung

Edge-Core

Edge-Core ECWO7220-L Bedienungsanleitung

Edge-Core

Edge-Core ECWO5210-L Bedienungsanleitung

Edge-Core

Edge-Core WA4101-Cradle Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung