Edimax ES-3124RE+ Bedienungsanleitung

24-Port Fast/Gigabit

Ethernet Smart Switch

(VLAN, Trunking, QoS)

ES-5224R+

ES-5224RF+

ES-5224RE+

ES-3124RE+

User’s Manual

FCC COMPLIANCE STATEMENT

This equipment has been tested and found to comply with the

limits of a Class A computing devices, pursuant to Part 15 of the

FCC rules. These limits are designed to provide reasonable

protection against harmful interference. This equipment

generates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions, may

cause harmful interference to radio communications.

If you suspect this product is causing interference, turn your

computer on and off while your radio or TV is showing

interference. If the interference disappears then when you turn

the computer off and reappears then you turn the computer on,

something in the computer is causing interference.

You can try to correct the interference by one or more of the

following measures:

1. Reorient/relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit difference

from that to which the receiver is connected.

4. Ensure that all expansion slots (on the back or side of the

computer) are covered. Also ensure that all metal retaining

brackets are tightly attached to the computer.

Content

1. Introduction .........................................3

2. Features & Specifications ...................4

3. Package Contents.................................6

4. Hardware Description.........................7

5. Advance Smart Function Setting .....9

5.1 Main Manu.......................................11

5.2 Switch Static Configuration ...........13

5.2.1 Port Configuration......................14

5.2.2 Trunk Configuration...................16

5.2.3 VLAN Configuration .................17

5.2.3.1 VLAN Configure....................18

5.2.3.2 Create a VLAN Group...........20

5.2.3.3 Edit/Delete a VLAN Group ...22

5.2.4 Misc Configuration ....................23

5.2.4.1 SW version.............................23

5.2.4.2 Change User Name...............24

5.2.4.3 Change User Password.........24

5.2.5 Priority Configuration................25

5.3 Reboot Switch ................................26

5.3.1 Default........................................26

5.3.2 Reset...........................................27

6. Troubleshooting................................. 28

1. Introduction

Congratulations on your purchase of this Fast/Gigabit

Ethernet Smart Switch. This high performance smart switch

provides Ethernet ports to segment network traffics, extend

Ethernet connection distance, and convert data packets between

different transmission speeds.

This switch utilizes stored-and-forward switching

architecture that filters and forwards data after the complete data

packet is received and examined to be free of errors. With one

set of status LEDs for each individual port, the switch operation

status can be easily monitored.

All the Fast Ethernet ports support both Full and Half

duplex mode which are able to provide up to 200Mbps

(2000Mbps for Gigabit Ports) of bandwidth to the connected

devices, with auto-negotiation providing the capability to

connect to 100/10Mbps(1000/100/10Mbps for Gigabit ports)

network devices. It also supports backpressure and IEEE 802.3x

advanced flow control capabilities that can reduce congestion

and prevent packet loss.

And it offers advance features:

 VLAN: Port-based and Tag-based VLAN allow you to set

virtual LANs within your network

 Trunking: Reduce the bottleneck between switches

 QoS: Two priority queues per port allow you to define

which port has higher priority.

 Expansion Slot Option: Provides copper or fiber

(multi/single mode) module option

In addition, all the ports support the MDI/MDI-X

auto-detect function. That is to say, you can connect any device

(including PC, Switch, Hub) to a port of this switch using a

regular cable. The RJ-45 port will auto-detect and auto-switch to

the correct MDI/MDI-X mode (do not need to use a specific

uplink port or cross-over cable).

2. Features & Specifications

Features

 Complies with the IEEE802.3 Ethernet, IEEE802.3u Fast

Ethernet (IEEE802.3z, IEEE802.3ab for Gigabit switch)

 Provides Store-and-Forward architecture and full wire

speed filtering and forwarding rates

 10/100Mbps Ports support full/half duplex modes and

auto-negotiation

 Provides two Fast Ethernet Modules option (Fast Ethernet

Smart Switch):

♦ 100/10Mbps UTP connector (RJ-45)

♦ 100Mbps Fiber SC/ST connector (multi/single mode)

 Provides two Gigabit Ethernet Modules option (Gigabit

Ethernet Smart Switch only):

♦ 1000/100/10Mbps UTP connector (RJ-45)

♦ 1000Mbps Fiber SC connector (multi/single mode)

 Supports flow control: back pressure for half-duplex mode,

IEEE 802.3x for full-duplex mode

 Supports Port-based VLAN and IEEE802.1Q Tag-based

VLAN (up to 256 groups)

 Supports Trunking:Up to 7 trunking groups

 Supports Console configuration

 19” rackmount size designed

Specifications

 Standards: IEEE802.3, IEEE802.3u, IEEE802.3z,

IEEE802.3ab, IEEE802.1Q, IEEE802.1p

 10/100Mbps Ports: RJ-45 ×24

 Expansion Slot Option (Fast Ethernet Switch):

♦ 10/100Mbps UTP connector (RJ-45)

♦ 100M Fiber SC/ST connector (multi/single mode)

 Expansion Slot Option (Gigabit Ethernet Switch only):

♦ 1000/100/10Mbps UTP connector (RJ-45)

♦ 1000Mbps Fiber SC connector (multi/single mode)

 Console Port: DB9 ×1

 Forwarding Method: Store-and-Forward

 MAC Address: 14K

 Buffer Memory: 512KBytes

 Flow control: Back pressure for half-duplex and

IEEE802.3x for full-duplex

 Auto-negotiation: All ports

 Auto-MDI/MDI-X function: All ports

 System LED indication: Power

 Port LED indication:

LNK/ACT: Link / Activity

Speed: 10/100Mbps

 Dimension: 45(H) ×445(W) ×170(D) mm

1.8(H) ×18(W) ×6.9(D) in

 Weight: 2.45 Kg / 5.5 lb

 Operation Temperature: 50~131℉(10~55℃)

 Operation Humidity: 10~95% (Non-condensing)

 Power: 100~240VAC, full range internal power supply

 Emission: FCC Class A, CE, C-Tick

3. Package Contents

Packing list

Check the contents of your package for following parts:

 One Fast/Gigabit Ethernet Smart Switch

 One User's manual

 One Power cord

 One RS-232 Cable

If any of the items are missing or damaged, please

contact your local dealer.

CONSOLE

24-port Fast Ethernet Smart Switch

power

4. Hardware Description

This section describes the hardware features of this

Fast/Gigabit Ethernet Smart Switch. For easier management and

control of the switch, familiarize yourself with its display

indicators and ports. All LEDs are located on the front panel of

the switch. They serve the purpose of monitoring the operation

and performance of the switch at a glance.

LED indicators

LNK/ACT LNK: ON

ACT: Blin

100M ON:100M

OFF:10M

power

16 LNK/ACT

LNK/ACT

100M

Operating Environment

This smart switch must be installed and operated within the

limits of the specified operating temperature and humidity (see

previous section on Specifications). Do not place objects on top

of the unit or obstruct any vents at the sides of the unit. Do not

position the unit near any heating source such as heaters,

radiators, or direct exposure to sun. Do not expose the unit to

water and or moisture. If necessary, use a dehumidifier to reduce

humidity.

Connecting to network devices

1. All ports of this switch support the Auto-MDI/MDI-X

function. That is to say, you can connect any device

(including PC, Switch, Hub) to a port of this switch using a

regular cable. The RJ-45 port will auto-detect and

auto-switch to the correct MDI/MDI-X mode. (do not need

to connect to a specific uplink port or cross-over cable)

2. Connect one end of the network cable to the RJ-45 port on

the front panel, and connect the other end of the network

cable to the RJ-45 port on the network device. Follow the

same procedure to connect all the RJ-45 ports of the switch.

Maximum length, using UTP cable, between the switch and

connected device is 100 meters (300ft). Once the network

cable is connected to both ends and the attached network

device is powered on, the LNK/ACT LED should be lit.

3. Make sure the wiring is correct. You need to use Category

3/4/5 cable for 10Mbps operation or Category 5 cable for

100Mbps connections.

Connecting the power

Plug the power cable into the internal three-pronged power

plug. Connect it to an electrical outlet then turn on the switch.

5. Advance Smart-Function Setting

This smart switch provides advance features, which offers

you more flexibility in setting up your network. The following

section explains how to set up the VLAN, Trunking, Port

speed, Full/Half duplex modes and QoS.

Before using advance Configuration

Connect to PC

Attach a RS-232 serial cable 9-pin male connector to the

female connector on the switch. Plug the other side of this

cable to your PC.

Using Hyper Terminal to connect to Switch

In MS-Windows, launch “Hyper Terminal”, create a new

connection, and follow these steps:

1. Open the HyperTerminal application.

2. In Windows, select run from the start menu and choose the

application.

3. From the HyperTerminal menu, double click the icon then

on the next window, create a new name, such as Smart

Switch.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Edimax Schalten Handbücher

Edimax

Edimax EK-PS2C Referenzhandbuch

Edimax

Edimax ES-3305P V2 Betriebsanleitung

Edimax

Edimax GS-3008P Bedienungsanleitung

Edimax

Edimax EK-PAK2 Bedienungsanleitung

Edimax

Edimax EK-PSK4 Bedienungsanleitung

Edimax

Edimax EK-08RO Bedienungsanleitung

Edimax

Edimax GS-5654LX Bedienungsanleitung

Edimax

Edimax ES-5160G+ Bedienungsanleitung

Edimax

Edimax EK-UA2C Bedienungsanleitung

Edimax

Edimax EK-PAK4 Bedienungsanleitung

Edimax

Edimax ES-5160G+ V2 Bedienungsanleitung

Edimax

Edimax ES-5800G V3 Installations- und Betriebshandbuch

Edimax

Edimax EK-PS2C Bedienungsanleitung

Edimax

Edimax ES-5224RM+ Bedienungsanleitung

Edimax

Edimax ES-5844P Bedienungsanleitung

Edimax

Edimax ER-5398S Bedienungsanleitung

Edimax

Edimax ES-1008PH Bedienungsanleitung

Edimax

Edimax ES-5500G Bedienungsanleitung

Edimax

Edimax ES-5500M V2 Bedienungsanleitung

Edimax

Edimax EK-2U2C Bedienungsanleitung

Edimax

Edimax SP-1101W Bedienungsanleitung

Edimax

Edimax ES-3208P Bedienungsanleitung

Edimax

Edimax GS-1016 Bedienungsanleitung

Edimax

Edimax 24 10 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung