EDS ESense EMS-100WL Bedienungsanleitung

EMS-100WL

ENVIRONMENTAL MONITORING SYSTEMS

WIRELESS MONITORING PANEL

Installation Manual

www.edselectronic.com

eSense appliance is designed to detect temperature, pressure, humidity, noise and

voltage & frequency changes.The system consists of control panel and sensors and

used in wide range of applications and markets such as medical, pharmaceutical,

industrial, commercial and many more. eSense transmits the sensor data with wire

or wireless 24/7 to the server. Stored data are available as report and user is able to

view graphically from web interface and mobile application.

DESCRIPTION

Product Family

P/N Description

EMS-100WL Wireless Monitoring Panel

EMS-100L Wired Monitoring Panel

EMS-100GSM GSM Monitoring Panel

ENS-100 Wired Humidity Sensor

ENS-100T Wireless Humidity Sensor

ES-100 Wired Temperature Sensor

ES-100T Wireless Temperature Sensor

EB-100 Wired Pressure Sensor

EB-100T Wireless Pressure Sensor

EGS Noise Sensor

EVF-100 Voltage and Frequency Sensor

EIO-100 Digital Access Module

EMAS-100 Analog Access Module

PHYSICAL

SPECIFICATIONS

Model EMS-100WL

Environmental class II Indoor

Type Wireless

Electrical

Adapter input 5.6V DC/1A

Sound indicator Piezo buzzer

Sound intensity 68dB (1m)

Power LED Green

Network 10/100Mpbs

Maximum network distance 30m

LCD 2x16 LCD screen

Wireless operating frequency 434.2 Mhz

Modulation type gfsk

Sensor

Sensor connection 8

Sensor communication

distance 20-30m (indoor)

General

Operating temperature 0OC / +45OC

Dimensions (HxWxD) 120x150x20 mm

Weight 189.5 g

Year of Manufacture The year and week of manufacture is included in the rst four digit of

your product serial number (located on the product identication label)

Manufacturer EDS Elektronik Destek Sanayi ve Ticaret Ltd.

Meclis Mah. Teraziler Cad. Hayran Sk. No: 4 34785

Sancaktepe / İstanbul / Turkey

Recycle

Environmental Monitoring Systems

MOUNTING

The Esense Control Panel has an LCD screen that shows the date-time and

sensor values.

With the FN (Function Key) located on the left side of the Esense Media

Control Panel, you can see the values of your sensors with more than one on

the LCD screen. There is one RS232 connection.

The Esense Control Panel has an Ethernet port and DC 5,6V 1A adaptor

input on the right side.

LCD Screen

Ethernet wire entry

Power AC housing

LED Indicator

Function key

Serial port (RS232)

connection

Figure 1: EMS-100WL

Mounting of the Esense Media Control Panel

Remove the Esense Media Control Panel and connection apparatus from

the contents of the box. For wall mounting, you can mount the wall with

dowels and screws and/or attach it to the wall with silicone tape.

Screw place

Cable slot

Figure 2: Panel Wall Mounting

2 2

It is recommended that the surface on which the wireless monitoring panel

and sensors will be mounted is not ferromagnetic material (cold room

warehouse door, steel, metal etc.). As this type of material will weaken the

signal transmission, if possible, install it on a non-ferromagnetic surface that

does not block the signal. If it is mandatory to install on this type of surface,

the products should be mounted at least 15 cm with the surface.

Remove the Internet Wire from the contents of the box. Connect it to Ethernet

port on the Esense Control Panel. Connect its other end to your devices such

as modem/switch/hub.

Figure 3: Panel Vertical / Horizonal Mounting

If you do not want to mount on the wall, you can place on your table etc.

vertically or horizontally.

Connect your Wired Sensor to the one relevant socket on the right side

of the Esense Control Panel. Please do not position sensor next to the air

conditioner.

Connect DC 5,6V 1A adaptor to plug. Connect it to the adaptor socket on

the Esense Control Panel.

Note on the LCD screen on the Esense Control Panel by following the IP

address assigned by DHCP. The IP address will rapidly pass in the rst 5

seconds, then the date-time and sensor value will come.

Figure 5: Wired / Wireless Humidity Sensor

Figure 4: Wired / Wireless Temperature Sensor

Figure 5: LCD screen

With Esense Control Panel, the wireless sensor should be placed within

a maximum of 20m in closed area and within a maximum of 150m in open

area. Wireless sensors work with two alkaline batteries. You can replace the

batteries by removing the two screws on the back of the wireless sensors.

You can connect your wired sensors to the relevant ports located on the left

or right side of the Esense Control Panel to attach additional wireless sensor.

Wait until the sensor you have attached to the device is displayed.

By shortly pressing the FN key (max 1sn) on the device, you can check

multiple sensors and values.

WARNING

If you see the IP address 169.254.254.169, the internet wire cannot be

regularly connected. Please check your internet and wire connection.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere EDS Messgerät Handbücher

EDS

EDS eSense EMS-100GSM Bedienungsanleitung

EDS

EDS EPC Series Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung

EDS eSense EMS-100WL Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken