Edwards IPVA10EK Bedienungsanleitung

C417-60-880

Issue A Original

Instruction Manual

IPVA10EK Air Admittance Valve

Description Item Number

Normally open valve - 230 V a.c. C417-60-000

Normally open valve - 110 V a.c. C417-60-100

Normally open valve - 24 V d.c. C417-60-200

Normally closed valve - 230 V a.c. C417-70-000

Normally closed valve - 110 V a.c. C417-70-100

Normally closed valve - 24 V d.c. C417-70-200

This product has been manufactured under a quality system certified to ISO9001:2008

Declaration of Conformity

We, Edwards Limited,

Crawley Business Quarter,

Manor Royal

Crawley,

West Sussex, RH10 9LW, UK

declare under our sole responsibility, as manufacturer and person within the EU authorised

to assemble the technical file, that the product(s)

Normally open valves:

230 V a.c. C417-60-000

110 V a.c. C417-60-100

24 V d.c. C417-60-200

Normally closed valves:

230 V a.c. C417-70-000

110 V a.c. C417-70-100

24 V d.c. C417-70-200

to which this declaration relates is in conformity with the following standard(s) or other

normative document(s)

EN61010-1:2010 Safety Requirements for Electrical Equipment for Measurement,

Control and Laboratory Use. General Requirements

EN50581:2012 Technical Documentation for the Assessment of Electrical and

Electronic Products with respect to the Restriction of Hazardous

Substances

and fulfils all the relevant provisions of

2006/95/EC‡Low Voltage Directive

2011/65/EU* Restriction of Certain Hazardous Substances (RoHS) Directive

* i.e. The product(s) contain less than - 0.1wt% for hexavalent chromium, lead, mercury, PBB and PBDE; 0.01wt% for

cadmium - in homogeneous materials (subject to the exemptions allowed by the Directive). The RoHS Directive does

not legally apply to industrial vacuum equipment until July 2019 (July 2017 for instruments).

‡110 V a.c. and 230 V a.c. only

Note: This declaration covers all product serial numbers from the date this Declaration was

signed onwards.

19.09.2013, Eastbourne

Mr L Marini, Senior Technical Manage

Date and Place

P200-07-920 Issue A

This product has been manufactured under

a quality system

certified

to ISO9001:2008

Declaration of Incorporation

We, Edwards Limited,

Crawley Business Quarter,

Manor Royal,

Crawley,

West Sussex, RH10 9LW, UK

declare under our sole responsibility, as manufacturer and person within the EU authorised

to assemble the technical file, that the machine(s)

Normally open valves:

230 V a.c. C417-60-000

110 V a.c. C417-60-100

24 V d.c. C417-60-200

Normally closed valves:

230 V a.c. C417-70-000

110 V a.c. C417-70-100

24 V d.c. C417-70-200

to which this declaration relates is intended to be incorporated into other equipment and not to

function independently. The machine(s) must not be put into service until the equipment into

which it is incorporated has been brought into conformity with the provisions of the Machinery

Directive, 2006/42/EC.

The machine(s) is in conformity with the following standard(s) or other normative

document(s)

None.

and fulfils all the relevant provisions of

2006/95/EC Low Voltage Directive

2011/65/EU* Restriction of Certain Hazardous Substances (RoHS) Directive

* i.e. The product(s) contain less than - 0.1wt% for hexavalent chromium, lead, mercury, PBB and PBDE; 0.01wt% for

cadmium - in homogeneous materials (subject to the exemptions allowed by the Directive). The RoHS Directive does

not legally apply to industrial vacuum equipment until July 2019 (July 2017 for instruments).

The relevant essential requirements of the Machinery Directive 2006/42/EC Annex 1 have been applied

and fulfilled so far as practicable for this partly completed machinery. The relevant technical

documentation has been compiled in accordance with Annex VII Part B. In response to a reasoned request

by the national authorities, Edwards Ltd undertakes to provide relevant information on the partly

completed machinery (via email).

Note: This declaration covers all product serial numbers from the date this Declaration was

signed onwards.

19.09.2013, Eastbourne

Date and Place

P200-07-940 Issue A

Mr L Marini, Senior Technical Manage

This page intentionally blank.

Edwards and the Edwards logo are trademarks of Edwards Limited.

Contents

C417-60-880 Issue A

Contents

Section Page

1 Introduction .......................................................................................1

1.1 Scope and definitions ................................................................................................... 1

1.2 Description ................................................................................................................ 1

2 Technical data ....................................................................................2

2.1 General .................................................................................................................... 2

2.2 Performance .............................................................................................................. 2

2.3 Electrical data ............................................................................................................ 2

2.4 Materials .................................................................................................................. 3

2.5 Item numbers ............................................................................................................. 3

3 Installation .........................................................................................5

3.1 Unpack and inspect ...................................................................................................... 5

3.2 Install the valve .......................................................................................................... 5

3.3 Electrical connections ................................................................................................... 5

4 Operation ..........................................................................................7

5 Maintenance .......................................................................................8

6 Storage and disposal .............................................................................9

6.1 Storage .................................................................................................................... 9

6.2 Disposal ....................................................................................................................9

For return of equipment, complete the HS Forms at the end of this manual.

Illustrations

Figure Page

1 Valve dimensions ......................................................................................................... 4

2 Electrical supply socket ................................................................................................. 6

cg/09/13

This page has been intentionally left blank.

C417-60-880 Issue A

Edwards and the Edwards logo are trademarks of Edwards Limited.

Introduction

C417-60-880 Issue A

1Introduction

1.1 Scope and definitions

This manual provides installation, operation and maintenance instructions for the Edwards IPVA10EK air admittance

valve. The valve must be used as specified in this manual.

Read this manual before installing and operating the valve. Important safety information is highlighted as WARNING

instructions; these instructions must be obeyed.

The use of WARNINGS and CAUTIONS are defined below.

CAUTION

Cautions are given where failure to observe the instruction could result in damage to the equipment, associated

equipment and process.

The following warning symbols can be found on this product:

The units used throughout this manual conform to the SI international system of units of measurement.

1.2 Description

The IPVA10EK valve is solenoid-operated and is designed for the automatic admittance of air or vent gas into a

vacuum system. The vacuum system is isolated from atmosphere (or the vent gas supply) by a fluoroelastomer pad

on the base of the valve-plunger which seals against the body of the valve.

The valve has two ports with NW flanges. One of these flanges is used to connect the valve to the vacuum system;

the other flange can be left open to atmosphere or connected to a vent gas supply.

Normally-open and normally-closed versions of the valve with a range of different electrical supplies are available to

suit the application.

WARNING

Warnings are given where failure to observe the instruction could result in injury or death to

people.

Warning - refer to accompanying documentation.

Warning - hot surface.

C417-60-880 Issue A

Edwards and the Edwards logo are trademarks of Edwards Limited.

Technical data

2Technicaldata

2.1 General

2.2 Performance

2.3 Electrical data

Dimensions See Figure 1

Mass 0.35 kg

Ambient operating temperature range -20 to 55°C

Vent gas temperature range -10 to 130°C

Maximum humidity 80% RH up to 31°C decreasing linearly to 50% RH at

40°C and above

Maximum altitude 2000 meters

Pollution degree 2

Overvoltage category II

Leak rate < 1 x 10-6 mbar.ls-1, < 1 x 10-4 Pa.ls-1

Venting rate 10 l in 12 seconds

Maximum cycle frequency 100 min-1

Mean time to failure (MTTF) 500,000 cycles

Response time 20 ms to open

30 ms to close

Maximum pressure d.c. electrical supply 1.8 bar (absolute), 1.8 x 105Pa

a.c. electrical supply 1.8 bar (absolute), 1.8 x 105Pa

Electrical supply 24 V d.c.

110 V a.c., 1-phase, 50/60Hz

230 V a.c., 1-phase, 50/60Hz

Electrical supply tolerance

Normally closed valves:

230 V a.c. ±10%

110 V a.c. ±10%

24 V d.c. ±10%

Normally open valves:

230 V a.c. ±10%

110 V a.c. ±10%

24 V d.c. +10%, -5%*

* Voltage tolerance reduced at elevated ambient temperatures; maximum recommended ambient temperature:

40°C

Edwards and the Edwards logo are trademarks of Edwards Limited.

Technical data

C417-60-880 Issue A

2.4 Materials

2.5 Item numbers

Power Consumption

Normally closed valves

230 V a.c. 5 W

110 V a.c. 5 W

24 V d.c. 5 W

Normally open valves

230 V a.c. 7 W

110 V a.c. 7 W

24 V d.c. 9 W

Duty cycle 100% continuous rating

Protection class IP65

Electrical supply cable outer diameter 6 to 7 mm

Coil insulation Class H

Materials exposed to vacuum*:

*Normally open variants have an additional carbon loaded PTFE slide ring within the vacuum envelope

Body Aluminium

Valve seals Fluoroelastomer

Actuator Stainless steel

Shading rings Silver

IPVA10EK normally open valves IPVA10EK normally closed valves

230 V a.c. C417-60-000 240 V a.c. C417-70-000

110 V a.c. C417-60-100 110 V a.c. C417-70-100

24 V d.c. C417-60-200 24 V d.c. C417-70-200

C417-60-880 Issue A

Edwards and the Edwards logo are trademarks of Edwards Limited.

Technical data

Figure 1 - Valve dimensions

IPVA10EK normally open valves IPVA10EK normally closed valves

Voltage Item number Dimensions Voltage Item number Dimensions

230 V a.c. C417-60-000 Figure 1A 230 V a.c. C417-70-000 Figure 1A

110 V a.c. C417-60-100 Figure 1A 110 V a.c. C417-70-100 Figure 1A

24 V d.c. C417-60-200 Figure 1A 24 V d.c. C417-70-200 Figure 1B

Andere Handbücher für IPVA10EK

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Edwards Steuereinheit Handbücher

Edwards

Edwards PV10/16EK Bedienungsanleitung

Edwards

Edwards 3-24R Montageanleitung

Edwards

Edwards CTM Montageanleitung

Edwards

Edwards SCU-1601 Bedienungsanleitung

Edwards

Edwards LCPVEK Series Bedienungsanleitung

Edwards

Edwards PVEK Series Bedienungsanleitung

Edwards

Edwards GV Series Bedienungsanleitung

Edwards

Edwards LCPV16EKA Bedienungsanleitung

Edwards

Edwards SCU-801 Bedienungsanleitung

Edwards

Edwards SCU-750 Bedienungsanleitung

Edwards

Edwards TIC Bedienungsanleitung

Edwards

Edwards 3-ASU Montageanleitung

Edwards

Edwards D397-52-000 Bedienungsanleitung

Edwards

Edwards SCU-350 Series Bedienungsanleitung

Edwards

Edwards A528-44-404 Bedienungsanleitung

Edwards

Edwards SIGA-CC2A Bedienungsanleitung

Edwards

Edwards TCU 40/80 Bedienungsanleitung

Edwards

Edwards SIGA-CC2 Montageanleitung

Edwards

Edwards QSB63 Bedienungsanleitung

Edwards

Edwards IBV16MKS Bedienungsanleitung

Edwards

Edwards QSB63 Bedienungsanleitung

Edwards

Edwards GSA-CC1 Montageanleitung

Edwards

Edwards IPVA10EK Bedienungsanleitung

Edwards

Edwards Speedivalve SP5 Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung