EGO TS Bedienungsanleitung

Installation instructions

Toyota Hiace

128 8229 1.02

(Built from 1996)

English

EGO TS

Table of contents

1 Introduction / Preface................................................................... 3

2 Safety Instructions ...................................................................... 4

3 Conformity statement ................................................................. 5

4 Scope of Delivery / Package content ........................................... 6

5 Installation instructions .............................................................. 7

5.1 Preparation............................................................................................ 7

5.2 Installation locations ............................................................................. 7

5.2.1 Checking cable lengths ................................................................................................ 7

5.2.2 Selection of the installation location for the electronics box...................................... 7

5.2.3 Selection of the point of installation for the microphone ............................................ 8

5.3 Mounting Components........................................................................... 9

5.3.1 Mounting the electronics box....................................................................................... 9

5.3.2 Mounting the microphone ............................................................................................ 9

5.4 Connection Concept............................................................................... 10

5.5 Installation of the components.............................................................. 10

5.6 Functional Test ...................................................................................... 15

5.7 Symbols ................................................................................................. 15

5.7.1 Key functions ................................................................................................................ 15

5.8 Getting started....................................................................................... 15

5.8.1 On / Off function ........................................................................................................... 15

5.8.2 Coupling........................................................................................................................ 16

5.8.3 Automatic coupling....................................................................................................... 16

5.8.4 LED status .................................................................................................................... 16

6 Troubleshooting .......................................................................... 17

7 Spares and accessories .............................................................. 18

8 Technical speciﬁcations .............................................................. 19

9 Certiﬁcation ................................................................................ 19

10 Hotline......................................................................................... 20

Introduction / Preface1

Congratulations on your new EGO!

EGO TS is the intelligent entry-level solution for telephone use in your car: simple to operate,

elegant and compact – with Bluetooth and audio enjoyment too.

The installation of your EGO TS in your car requires specialist knowledge and skills. We recom-

mend that the installation be carried out in a qualiﬁed professional workshop.

Before installation in your car, please make sure that your mobile phone is fully compatible with

EGO TS. If you are uncertain, please consult your dealer or a professional workshop. Our service

team will also be happy to help you with any information you may require. You can ﬁnd further

information on compatibility between EGO TS and various mobile phones on our website.

2 |3

EGO TS

Safety Instructions2

Incorrect installation1. – Incorrect installation may lead to damage to the units and/or your

car! Special knowledge and skills are required for installing the system. We strongly re-

commend that the system be installed by a qualiﬁed professional workshop.

2. Risk of injury – Unsuitable installation locations may become a source of injury in an acci-

dent situation, or may inhibit the correct functioning of essential safety equipment. Please

read the notes in the „Installation“ chapter carefully!

3. Risk of injury/material damage – the removal of cladding within the vehicle with sharp or

pointed tools may lead to injuries or material damage.

4. Road safety risk – Distracted attention can lead to dangerous situations in trafﬁc. Even

when using hands-free phone systems, your complete attention must be concentrated on

your driving and other road users. It is always advisable to do without phone calls in difﬁcu-

lt trafﬁc situations!

5. Damage to airbags – The wrong choice of location for installation may cause damage to

or inhibit the correct function of your airbags. Always install the components in a position

where they will not hinder the correct operation of airbags!

6. Insulation damage – Damaged insulation can lead to equipment and wiring damage. The

cables and leads may not be under tension when installed. Install the cables and leads in

such a way as to avoid pinching or abrasion.

7. Polarity and shorting damage – Cables connected with reversed polarity, or in such a way

as to produce a short circuit, can lead to serious damage to your equipment. Before com-

mencing installation, make sure that the car battery is disconnected.

8. Damage to essential vehicle components – Essential vehicle components or wiring can be

damaged when drilling mounting holes or screwing in self-threading screws. Please make

sure there is always sufﬁcient space behind the screw holes and drilled holes!

9. Interference with on-board electronics – Despite the extreme protection against interfe-

rence, incorrect installation can lead to interference with the vehicle electronic systems.

Please read the vehicle manufacturer’s notes to this effect!

Appropriate use10. – This equipment is intended solely for use with mobile telephones in mo-

tor vehicles.

11. Damage caused by inappropriate replacement parts – Inappropriate spare or replacement

parts may lead to malfunctions. Please use only the approved parts listed in the section

„Spares and accessories“!

Road safety risk12. – For your own safety, never initiate the coupling procedure while your

vehicle is in motion!

Conformity statement3

This equipment employs Bluetooth®wireless technology. In some countries, the use of this

equipment may be restricted or forbidden. Please make sure you are familiar with such restric-

tions and do not use your equipment if you are unsure whether its use is permitted in particular

countries you may be visiting.

Bluetooth®is a registered brand name of Bluetooth SIG, Inc.

The ﬁrm of Funkwerk Dabendorf GmbH

Märkische Straße

D-15806 Dabendorf

herewith declares that the hands-free system „EGO TS“

in accordance with the essential requirements and other relevant provisions

of the Directive 1999/5/EC.

0681

4 |5

EGO TS

Scope of Delivery / Package content4

ÀElectronics box

ÁControl unit

ÂMicrophone

ÃExtension cable

ÄQuick Guide

ÃÄ

Installation instructions5

Improper Installation

Improper installation may cause damages to the unit or to the vehicle! The installation

of the hands-free car kit requires special knowledge and special abilities. Short circuits

or cables connected in reverse polarity can cause severe damage to the unit. Ensure the

vehicle’s battery is disconnected before you start the installation procedure. We therefo-

re recommend to have the installation done by a professional.

Preparation5.1

Test audio system-

Place protective covers on seats etc.-

Turn Off ignition-

Installation locations5.2

RISK OF INJURY!

Unsuitable installation locations may become a source of injury in an accident situation,

or may inhibit the correct functioning of essential safety equipment!

Checking cable lengths5.2.1

Before you ﬁx the components securely, check that the installation locations have been selected

in such a way that the length of the cables is sufﬁcient to connect the individual components.

Selection of the installation location for the electronics box5.2.2

The Bluetooth®antenna for the connec-

tion to the mobile phone is installed in

the electronics box. The antenna trans-

mits directionally towards the front. For

this reason, during installation, ensure

that the antenna faces into the passen-

ger cell (see Fig.). Vertical mounting is

ideal. Metallic screening between the

front panel and the passenger cell, such

as metal or metallised plastic panels,

are unsuitable and may interfere with

the Bluetooth®connection. Locations

behind the dashboard or in a metal-lined glove compartment are also unsuitable.

A covering in plastic, fabric or wood presents no problems whatsoever

6 |7

EGO TS

Suitable locations for the

electronics box:

- Passenger side, next to the centre

column under the panelling, model-

speciﬁc installation console (dealer)

- Our suggested installation locations

are shown in the illustration on the

right

Further unsuitable locations are:

Leg and knee height, potential head

impact zone, airbag inﬂation space,

engine compartment

Selection of the point of installation for the microphone5.2.3

Suitable for the microphone:

- where voice can reach the microphone

unhindered (distance between the spea-

ker and the microphone should be ap-

prox. 35 cm), on the A-column (between

windscreen and side window), next to

the driver‘s sun visor, on the dashboard

The illustration shows one of the po-

tential microphone mounting locations.

Alternatively, the microphone may be

attached to the sun visor with the clip

provided.

Unsuitable for the microphone:

-Close to the speakers (less than

80 cm), under the dashboard, in the air

stream from open windows or ventilator

outlets

Mounting Components5.3

DAMAGE TO ESSENTIAL VEHICLE COMPONENTS!

Essential vehicle components or wiring can be damaged when drilling mounting holes

or screwing in self-threading screws. Please make sure there is always sufﬁcient space

behind the screw holes and drilled holes!

Mounting the electronics box5.3.1

Deﬁne the mounting points

Making sure that there is at least

70 mm space for the plug and

socket connectors. Mark the posi-

tions for the ﬁxing screws.

Mounting the electronics box

For mounting the electronics box,

use four self-threading screws

and appropriate washers. We

recommend size “ST 2,9x25 DIN

7981”self-threading screws. These

are ideal for the ﬁxing of the electronics box. Pre-drill the holes with a 2 mm drill.

Mounting the microphone5.3.2

Deﬁne the mounting location

The microphone holder has a self-adhesive strip on the back. The mounting location should

have the same form and area as the self-adhesive strip on the microphone holder. The location

selected must allow the microphone cable to reach the electronics box! Locate the microphone

with its head in the direction of speech.

Cleaning and degreasing the mounting location

The mounting location must be clean and free from grease and dirt/dust. Clean the proposed

area with a cleansing product such as methylated spirits. Only use cleansing products that

do not damage plastics or varnished wood ﬁnishes and are themselves free of oils or grease.

Unsuitable cleansers are, for example,: lighter ﬂuid, acetone, turpentine, trichloroethylene and

Beliebte Autozubehör Handbücher anderer Marken

James Baroud

James Baroud Odyssey Bedienungsanleitung

Motorola

Motorola i50sx Bedienungsanleitung

Yakima

Yakima 9MM STANDARD BIKE MOUNT Bedienungsanleitung

Feniex

Feniex T3 Bedienungsanleitung

Kia

Kia E8300-4D000 Bedienungsanleitung

Brink

Brink 756843 Bedienungsanleitung

Whispbar

Whispbar K085W Bedienungsanleitung

v.link

v.link CI-VL2-PC-HSD Bedienungsanleitung

Viking

Viking Stack-Rack Kurzanleitung zur Einrichtung

Aries

Aries 203015 Bedienungsanleitung

Choetech

Choetech AT0005 Bedienungsanleitung

ZZ2

ZZ2 ZZAIR-PRO Bedienungsanleitung

Holman

Holman 4A80L Bedienungsanleitung

Thule

Thule 2075 Bedienungsanleitung

Motorola

Motorola T325 Bedienungsanleitung

TAUBENREUTHER

TAUBENREUTHER 16-3950 Installationsanleitung

DV8

DV8 FBJL-02 Bedienungsanleitung

Prorack

Prorack K1163 Bedienungsanleitung