EKO MS-80 Bedienungsanleitung
MS-‐AlbedoQuickStartGuide
ForallMS-‐80/60/40models
Votre distributeur en France
1.I cludeditems
• 1x moun(ng arm
• 1x moun(ng flange for MS- ‐80/60/40
• Included to the pyranometer ox (2x olts (M5) / 2 x nuts (M5) / 4 x washers (M5))
• Glare screen (for downward facing sensor)
Outli e
Thank you for using EKO Products. For installa(on of the pyranometers in com ina(on with
the MS- ‐Al edo plate the instruc(ons are in the Quick Start Guide.
1. Included items
2.
Setup loca(on
3. Assem ly
Votre distributeur en France
Alliance Technologies, 13 rue de Boisbonnard, 37150 Dierre France - 02 73033 5 - contact@alliance-technologies.net
2.Set-‐uplocaFo
The MS- ‐Al edo configura(on can e setup onsite. Use a solid ase to mount the arm in a
horizontal or (lted posi(on with the arm oriented towards the nearest pole (horizontal
posi(on). The op(mal height and (lt* posi(on depend on the applica(on.
*An op(onal (lt racket is availa le to mount in horizontal or (lt posi(on.
Tilt racket for MS- ‐Al edo kit
Votre distributeur en France
Alliance Technologies, 13 rue de Boisbonnard, 37150 Dierre France - 02 73033 5 - contact@alliance-technologies.net
3.Assembly
1. AXach the al edo arm to a solid ase (Pole, frame, ta le).
Votre distributeur en France
Alliance Technologies, 13 rue de Boisbonnard, 37150 Dierre France - 02 73033 5 - contact@alliance-technologies.net
3.Assembly
2. Remove the sunscreen and leveling feet from the 2 pyranometers. The
pyranometers can e directly mounted to the plate.
Votre distributeur en France
Alliance Technologies, 13 rue de Boisbonnard, 37150 Dierre France - 02 73033 5 - contact@alliance-technologies.net
3.Assembly
3. AXach the pyranometers to the plate using the M5 olts, washers and nuts provided with
the pyranometers (step 1- ‐4).
Flip plate with
sensor
1 2 3 4
Votre distributeur en France
Alliance Technologies, 13 rue de Boisbonnard, 37150 Dierre France - 02 73033 5 - contact@alliance-technologies.net
3.Assembly
4. AXach the glare- ‐screen* to the sunscreen.
*Only for the downward facing sensor
1. Insert 2. Put in posi(on 3. Rotate 90 degrees
1 2 3
Votre distributeur en France
Alliance Technologies, 13 rue de Boisbonnard, 37150 Dierre France - 02 73033 5 - contact@alliance-technologies.net
3.Assembly
5. AXach the two sunscreens.
1 2 3
Votre distributeur en France
Alliance Technologies, 13 rue de Boisbonnard, 37150 Dierre France - 02 73033 5 - contact@alliance-technologies.net
Andere Handbücher für MS-80
4
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Andere EKO Messgerät Handbücher
EKO
EKO MS-57 Bedienungsanleitung
EKO
EKO MS-80SH Bedienungsanleitung
EKO
EKO MP-11 Bedienungsanleitung
EKO
EKO MS-802 Bedienungsanleitung
EKO
EKO MS-40S Bedienungsanleitung
EKO
EKO MS-80 Bedienungsanleitung
EKO
EKO MS-60 Bedienungsanleitung
EKO
EKO MS-40 Bedienungsanleitung
EKO
EKO MS-80 Bedienungsanleitung
EKO
EKO MS-20T Bedienungsanleitung
