3/ 5
3. S
elect the receive channel
In total 6 receive channels, “CH” button to switch channels, channel
number indicator flashing, means channel selected.
4.Volume Adjustment
、 These two buttons for volume control buttons, up key
volume increases, down key volume decreases.
5. Frequency Setting
1）Press CH button, select the setting channel
2）Long press CH button, corresponding channel light will enter slow
flashing state after 5 seconds, indicated entering frequency search mode,
waiting for search.
3）Press up key , channel entering quick flash state, frequency search
starts, then frequency into incremental search, if a channel searched,
corresponding channel light will enter slow flash state, press CH button to
save frequency and exit search mode. If not save this frequency, press up
or down key to continue the search.
4）Press down key , channel light entering quick flash state, frequency
search starts, then frequency will be decremented search, if a channel
searched, corresponding channel light will enter slow flash state, press CH
key to save frequency and exit search mode. If not save this frequency,
press up or down key to continue the search.
6.Restore Factory Defaults
Firstly press down key , then plug in headphone, wait for 3
seconds, release the button, unplug the headphone, then re-insert the
headphone, frequency back to the factory defaults.
Power Saving Mode
1）Stop pressing button after 5 seconds, entering power saving mode, then
the corresponding channel light off.
2）Press any key, the corresponding channel indicator lights up again,
receiver exit power saving mode.
www.ekt2.com
Electronics Katrangi Trading
