Ekwb EK-Quantum Momentum2 ROG Strix Z690-I Gaming D-RGB -... Bedienungsanleitung

USER GUIDE

MONOBLOCK

EK-Quantum

Momentum2ROG Strix Z690-I Gaming D-RGB - Plexi

Please note the installation of the product is intended to be undertaken

by an adequately trained and experienced person. You are installing the

product at your own risk. If you are not properly trained or experienced

or feel unsure about the installation procedure, please refrain from

installing the product yourself and contact our tech support for

assistance. We disclaim our liability for any damages to the product as

well as incidental, consequential, or indirect damages incurred due to

improper or inappropriate installation.

Before you start using this product, please follow these basic guidelines:

Carefully read the manual before beginning with the

installation process.

The EK Fittings require only a small amount of force to screw

them ﬁrmly in place since the liquid seal is ensured by the

rubber O-ring gaskets.

The use of corrosion inhibiting coolants is always

recommended for liquid cooling systems and mandatory for

nickel-plated water blocks!

Do not use pure distilled water!

For best results, EK recommends the use of EK-CryoFuel

coolants! To reach optimal performance, make sure to

thoroughly bleed the air out of your water block!

- 3 -

TABLE OF CONTENTS

BOX CONTENTS 4

WATER BLOCK DIMENSIONS 5

TECHNICAL SPECIFICATIONS AND WATER BLOCK PARTS 6

PREPARING THE MOTHERBOARD 7

CUTTING AND PLACING THERMAL PADS 9

APPLYING THERMAL COMPOUND 10

PREPARING THE WATER BLOCK FOR INSTALLATION 10

ATTACHING THE WATER BLOCK 11

ATTACHING THE REPLACEMENT COVER 12

FITTINGS AND TUBING 14

CONNECTING THE D-RGB LED STRIP 15

TESTING THE LOOP 15

SUPPORT AND SERVICE 16

SOCIAL MEDIA 16

- 4 -

BOX CONTENTS

4 mm

Allen Key 2 mm (1 pc)

Thermal Grease (1 pc)

EK-Quantum Momentum2ROG Strix Z690-I Gaming D-RGB - Plexi

M2.5x4 AX1 Screw (5 pcs) PVC Washer M2.5 (5 pcs)

Allen Key 2.5 mm (1 pc)

Thermal Pad F 1.5 mm

120 x 16 mm (3 pcs)

120 mm

16 mm

- 5 -

WATER BLOCK DIMENSIONS

101.2 mm

107.5 mm

9.5 mm

37.5 mm

28 mm

35.8 mm

158 mm

137.5 mm

32.5 mm

20.5 mm

- 6 -

TECHNICAL SPECIFICATIONS AND WATER BLOCK PARTS

Technical Speciﬁcation:

- D-RGB cable length: 500 mm

- D-RGB LED count: 15

- D-RGB connector standard 3-pin (+5V, Data, Blocked, Ground)

Position EAN Description Quantity

1104650 Backplate (Black e.) 1

2104913 Mounting Screw (Ni) 4

3104532 Seeger ring 2.3 mm 4

4104028 Coldplate (Nickel) 1

5105383 Mosfet N (Nickel) 1

6105385 Mosfet W (Nickel) 1

7105392 Mid plate 1

8100747 Spring M3 x 10 mm 4

9105391 Top Plate (Plexi) 1

10 105390 Standout (Acetal) 1

11 104773 Coldplate OR 53 x 2.5 mm 1

12 100663 EK - Badge 1

13 104444 Mylar sticker 1

14 105378 Replacement cover 1 (Black e.) 1

15 103734 Screw M3 x 18 7991DIN 1

16 100500 Screw M4 x 12 DIN7991 4

17 104353 Screw M3 x 12 DIN7991 5

18 8208N Screw M3 x 8 7991DIN 4

19 104029 Jet Plate 1700 1

20 5091 OR 110 x 2 mm 1

21 5087 OR 38 x 2 mm 1

22 8533 Standoff M4/M2.5 x 2.5 mm 4

23 5018 OR 28 x 1.5 mm 1

24 5035 OR 25 x 1.5 mm 1

25 105381 Replacement cover 2 (Black e.) 1

26 104344 Screw M2.5 x 10 AX1 1

27 103155 LED D-RGB Strip - 500/130 mm 1

- 7 -

For this step, you will need:

Phillips Head Screwdriver

PREPARING THE MOTHERBOARD

STEP 1

Important! Before starting, make sure to have a clean, ﬂat

surface to work on. It is recommended that you put foam

or soft material to lay a motherboard and water block on.

STEP 1

First, remove the six (6) M2 x 2.5 screws shown in the image.

STEP 2

Rotate the motherboard and remove an additional two (2) M2 x 2.5

screws. After removing the screws, detach the original I/O Fan Cover.

Save the screws and cover for later use.

STEP 2

SCREW

M2 x 2.5

SCREW M2 x 2.5

ORIGINAL I/O FAN COVER

- 8 -

For this step, you will need:

Phillips Head Screwdriver

STEP 3

The M.2 Slot Cover also needs to be removed. Unscrew one (1)

M2 x 7 and one (1) M2 x 15 Screw.

Save the M.2 Slot Screws for the later steps.

STEP 4

Carefully detach the Stock Cooler and not forget to unplug the

Fan Connector from the motherboard.

Save the Stock Cooler for later steps.

STEP 4

AIO PUMP

HEADER

I/O & VRM

HEATSINK

SCREW M2 x 7

SCREW M2 x 15

M.2 SLOT COVER

- 9 -

STEP 1

CUTTING AND PLACING THERMAL PADS

STEP 1

EK- Quantum Momentum2ROG Stix Z690-I Gaming D-RGB water

block comes with Thermal pads that have to be cut into smaller

pieces to cover all the regulation area (Mosfet) on the motherboard.

Replacement thermal pads:

Thermal PAD F 1.5 mm - (120 x 16 mm) – 3830046996749

For this step, you will need:

Scissors

Thermal Pad - 120 x 16 x 1.5 mm

F1.5

F1.5 F1.5

Thermal Pad F – 1.5 mm (120 x 16 mm)

1.5 mm

120 mm

16 mm

- 10 -

Thermal Grease

STEP 1

Apply the thermal paste (thermal compound) on the CPU heat

spreader - IHS. The layer of the thermal compound must be thin and

even in thickness over the entire surface.

The excessive or uneven application of thermal grease

may lead to poor performance!

STEP 1

APPLYING THERMAL COMPOUND

For this step, you will need:

PREPARING THE WATER BLOCK FOR INSTALLATION

STEP 1

Unscrew four (4) Velocity2mounting nuts (turn them in an

anticlockwise direction to unscrew). Remove the backplate and

save it for later steps. After the backplate is removed, do not

forget to peel off the protective sticker.

STEP 1

VELOCITY2

BACKP L ATE

TURN

ANTI-CLOCKWISE

TO UNSCREW

MS - VELOCITY2

MOUNTING SCREW (4x)

MS - VELOCITY2

MOUNTING

NUT (4x)

Andere Handbücher für EK-Quantum Momentum2 ROG Strix Z690-I Gaming D-RGB -...

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ekwb Computerhardware Handbücher

ekwb

ekwb EK-FC460 GS/SONIC Handbuch

ekwb

ekwb EK-FC690 GTX Backplate Handbuch

ekwb

ekwb EK-Classic Pump Reservoir 160 SPC PWM D-RGB Handbuch

ekwb

ekwb Velocity-AMD Bedienungsanleitung

ekwb

ekwb EK-Quantum Velocity 2 Bedienungsanleitung

ekwb

ekwb 115 Series Bedienungsanleitung

ekwb

ekwb EK-Quantum Convection M.2 NVMe Bedienungsanleitung

ekwb

ekwb EK-Vector RTX 2080 FTW3 Bedienungsanleitung

ekwb

ekwb EK-FC Bedienungsanleitung

ekwb

ekwb EK-Thermosphere Handbuch

ekwb

ekwb EK-FB ASUS Z270E Strix Monoblock Series Bedienungsanleitung

ekwb

ekwb EK-FC780 GTX Classy Rev.2.0 Backplate Leitfaden

ekwb

ekwb EK-FC7970 DCII Leitfaden

ekwb

ekwb EK-Quantum Reflection2 PC-O11D EVO D5 PWM... Bedienungsanleitung

ekwb

ekwb EK-FC R9-285 Handbuch

ekwb

ekwb EK-FC980 GTX Ti WF3 Handbuch

ekwb

ekwb Velocity - Intel Bedienungsanleitung

ekwb

ekwb EK H30 SUPREME Bedienungsanleitung

ekwb

ekwb EK-FC Titan X Original CSQ Handbuch

ekwb

ekwb EK-FB ASUS X58 Leitfaden

ekwb

ekwb EK-Pro GPU WB RTX 4000 - Ni + Inox Bedienungsanleitung

ekwb

ekwb EK-Loop Bedienungsanleitung

ekwb

ekwb EK-Quantum Kinetic FLT D5/DDC Body D-RGB Bedienungsanleitung

ekwb

ekwb EK-Loop PCI Bracket Pass-Through Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

Intel

Intel NUC 12 Pro Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung

Advantech

Advantech ASMB-935 Series Bedienungsanleitung

Jupiter

Jupiter RAM PACK Bedienungsanleitung

ekwb EK-Quantum Momentum2 ROG Strix Z690-I Gaming D-RGB -... Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken