Elation PIXEL TOUCH PCB Bedienungsanleitung
CAT WALK PANEL isawonderfulLEDdisplayscreenintegralwith25three-in-oneRGBLEDs,featuringauto
DMXaddressingandinductivetouchcontrol.
FEATURES
225gWEIGHT
60ms Min
INDUCTIVE TIME
20mm Max
INDUCTIVE DISTANCE
40mm
PIXEL DISTANCE
6A
MAX CURRENT INPUT
24VDC
OPERATING VOLTAGE
Fullcolor5050SMDLEDs(25pcs)
LIGHT SOURCE
450mA
CURRENT CONSUMPTION
200(L)x200(W)x10(H)mmDIMENSIONS
- Automatic DMX addressing
- Innovative control by inductive touching
- Easy&one-for-all setting
- Dazzling LED display suitable for various occasions
- Remarkable interactive lighting-up to walking or dancing
SPECIFICATIONS
INSTALLATION&OPERATION GUIDE
1 Field Connection
NOTE:
Connect the firstunittothe24VDCpowersupply(andaDMXcontroller, if necessary).Thenlinkotherunits
to it inaline by usingthepower/datacables.Upto24unitscanbelinkedtogetherbyDMX1000Kand6units
by DMX512.
i) Thenominalwattageofthepowersupply in usemustbeabovetheloading of thewholeline of units,
otherwiseextrapowersupplieswillhavetobeused,soastoavoidriskofover-loading.
Ii)Themaximumpermissiblecurrent of thepower/datacable is 6A.Alwayskeepinputcurrentbelow6A.
3 Auto DMX Addressing
,locotorpXMDaybdellortnocdnarehtegotdeknileranehW eblliwslennahcXMDstinuLENAPKLAWTAC
automaticallyaddressed in numericorder(D1~D25),startingfromred,greenandthenbluesectionofthe
firstLED(positiondesignator-D1) of thefirstunit.Thismeansasingleunitshalltakes75DMXchannels of
whicheachthreechannelsareassigned to oneLED(1st channelforred,2ndforgreenand3rdforblue).
2 Inductive Control
Whentheunitsaredulyconnectedandpowered,andanobjectegfinger, foot,etccomeswithinthe
inductiverange of theLEDs ofaunit,theLEDswillautomaticallychangefrombackgroundcolor(manually
presetorDMXcontrolled) to touch-color, andturnbacktobackgroundcolorwhentheobjectgoesoutofthe
inductiverange,.
PRODUCTION DESCRIPTION
PIXEL TOUCH PCB
USER MANUAL
24-004-2896-00
Rev1.1
24VDC
GND
GND
D-
D+
DMX
Power & data input
D1
D25
Fig 1
NOTE
i)
Ii) During the setting, m
Only the first unit in the line linked by DMX cables must be preset. Other units will follow the same way of
the first unit.
ake sure that intervals of touching between every two LEDs are less than 2 seconds.
The following table gives relevant information concerning the LEDs which may be used as functional
buttons during setting.
Touch Color
After the unit enters setting mode, the following table tells the color status of the LEDs and how to use the
signs to finish touch-color setting.
Touch-delay Time
Touch D21 again to finish touch-color setting and start to set touch-delay time. Now Line 5 is white in color. A
single touch on D22/D23 will increase/decrease touch-delay time by 0.1 second and holding it for 2
seconds will greatly speed the adjusting. Please view the following information revealing how the LEDs
demonstrate the time values.
Touch D21, Line 5 will change from red to green. Touch D21 again, the line will change to green. In this way
users may individually set the red, green and blue sections of touch-color.
LED (Time Indicator) LED Color Indicated Delay Time per LED (sec)
Any of Line 1 (D1~D5) red/white 0.1 / 0.2
Any of Line 2 (D6~D10) red/white 1/2
Any of Line 3 (D11~D15) red/white 10 / 20
Any of Line 4 (D16~D20) red/white 100 / 200
LED Line LED Color Signification
Line 1 (D1~D5) light blue (default setting) touch-color (variable as per the mixing of the
red, green, and blue sections)
Line 2 (D6~D10) red ( 0% intensity) red section of touch-color
Line 3 (D11~D15) green green section of touch-color
Line 4 (D16~D17) blue blue section of touch-color
Line 5 (D21~D25) red (default setting) the color section(red, green or blue) under settin
g
D13
LED Line LED Color Signification
Line 1 (D1~D5) light blue (default setting) touch-color (variable as per the mixing of the red,
green, and blue sections)
Line 2 (D6~D10) red ( 0% intensity) same as the red section of touch-color
(syncrhonizing with Line 5 when it is red in color )
Line 3 (D11~D15) green same as the green section of touch-color
(syncrhonizing with Line 5 when it is green in color)
Line 4 (D16~D17) blue same as the blue section of touch-color
(syncrhonizing with Line 5 when it is blue in color)
Line 5 (D21~D25) red (default setting) the color section(red, green or blue) under setting
4 How to Get the Unit Ready for Use
Start Setting
Turn on the LEDs one by one with a finger or similar object along the track indicated in Fig 1. Follow the track
a second time and then make the finger stay at LED D13 (the central one) till all the LEDs start twinkling,
which means the unit now has moved into setting mode and has been ready for further setting.
~3~
Touch D21 once and then twice, Line 5 will change from red to green and blue. Now the unit has been at the
end of the whole setting circle. Touch D21 again, the setting will move back to the first item of touch-color
setting.
Background Color
LED Line LED Color Signification
Line 1 (D1~D5) green (default setting) background color (variable as per the mixing of the
red, green, and blue sections)
Line 2 (D6~D10) red ( 0% intensity) red section of background color (syncrhonizing with
Line 5 when it is red in color )
Line 3 (D11~D15) green green section of background color(syncrhonizing
with Line 5 when it is green in color)
Line 4 (D16~D17) blue blue section of background color (syncrhonizing
with Line 5 when it is blue in color)
Line 5 (D21~D25) red (twinkling) the color section(red, green or blue) under setting
Touch D21 to enter background color setting. Please view the following table about the LED significations.
The maximum touch-delay time available is 530 sec. Please view the formula below to bring out the exact
touch-delay time:
LED amount of the same line & color its unit time value) time values of other LEDs Touch-delay Timex+ =
System Connection
It is required to make a proper system connection prior using this fixture, the following contents present you
the single module connection methods on next page.
~3~
24VDC, 6.5A
Transformer
DMX input
First Cable 1.5m
6pin Extension Cable 0.9m
6pin Extension Cable 0.09m
Catwlak Panel Single Module Connection Schematic Diagram
~4~
Andere Elation Beleuchtungsausrüstung Handbücher
Elation
Elation Trio-1248 Bedienungsanleitung
Elation
Elation E-LOADER III Bedienungsanleitung
Elation
Elation Power Spot 700 CMY II Bedienungsanleitung
Elation
Elation Design Par 575D Bedienungsanleitung
Elation
Elation MAGIC-260 Bedienungsanleitung
Elation
Elation Joy 150 Bedienungsanleitung
Elation
Elation Design LED 36WA Bedienungsanleitung
Elation
Elation PIXEL WASH 40IP Bedienungsanleitung
Elation
Elation KL FRENSEL 8 Bedienungsanleitung
Elation
Elation Event Cylinder DMX Bedienungsanleitung
Elation
Elation Design Spot 250 Pro Bedienungsanleitung
Elation
Elation ELAR PAR 72 UV Bedienungsanleitung
Elation
Elation EPAR TRI Bedienungsanleitung
Elation
Elation PRO FS 15R FOLLOWSPOT Bedienungsanleitung
Elation
Elation Design LED 36 Brick Bedienungsanleitung
Elation
Elation DLED STRIP RGBAW Bedienungsanleitung
Elation
Elation Level Q7 IP Bedienungsanleitung
Elation
Elation Arena Par Bedienungsanleitung
Elation
Elation Design LED 60 Strip II WA Bedienungsanleitung
Elation
Elation Elation DMX OPERATOR PRO Bedienungsanleitung
Beliebte Beleuchtungsausrüstung Handbücher anderer Marken
Qazqa
Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung
Commercial Electric
Commercial Electric 54568141 Bedienungsanleitung
CREE LIGHTING
CREE LIGHTING 304 Series Bedienungsanleitung
Goobay
Goobay 49867 Bedienungsanleitung
ECOMAN ITALIA
ECOMAN ITALIA LED T8 Bedienungsanleitung
Alkalite
Alkalite Krypton KT-81 Bedienungsanleitung
