Elation UNI BAR Bedienungsanleitung

4295 Charter Street

Los Angeles CA. 90058

www.elationlighting.com

Elation Professional R

UNI BARUNI BAR

USER MANUAL

24-004-2196-00 Rev1.0

DMX

DMX Address

Dim/Switch

Dim Preset

Dim Limit

DMX OUT

DMX IN

UNI BARUNI BAR

1=Ground

2=Data-

3=Data+

LOCAL DIM

(HTP)

Max

Min

EXTERNAL

REMOTE

Made in PRC

CAUTION ! Risk of Electric Shock DO NOT OPEN Ne pas ouvrir. Risque de choc electrique

Warning : This unit must be grounded

PUSH

OUTPUT : 10A Max.

F10A 250V

5x20mm.

POWER IN:

AC 230V~ 50Hz,10A Max.

FUSE

Contents

Features 1

General Instructions 2

1. Overview 3

2. Operation Guide 5

Technical Specifications 9

1.1 Right Panel 3

1.2 Left Panel 4

2.1 DMX Address Mode 5

2.2 Dim/Switch Pack Mode 6

2.3 Dim Limit Mode 7

2.4 Dim Preset Mode 8

Features

Thank you for your purchase. This product features

include:

Every effort has been made to design dependability, reliability and comfort into

each unit. New products are being designed constantly to meet the needs of

both entertainment and the lighting industry. We welcome your comments about

our product and services.

It is both a privilege and a pleasure serving you.

3-pin standard DMX IN/OUT ports providing dimmer information

Serves as a Switch Pack or Dimmer Pack, depending upon

the current operating mode.

Allows DMX Addressing, Dim Preset and Dim Limit.

Power failure memory.

4 digits Segment Display shows current activity and

function state.

Comply with HTP principle(Highest takes precedence).

Contents

Features 1

General Instructions 2

1. Overview 3

2. Operation Guide 5

Technical Specifications 9

1.1 Right Panel 3

1.2 Left Panel 4

2.1 DMX Address Mode 5

2.2 Dim/Switch Pack Mode 6

2.3 Dim Limit Mode 7

2.4 Dim Preset Mode 8

Features

Thank you for your purchase. This product features

include:

Every effort has been made to design dependability, reliability and comfort into

each unit. New products are being designed constantly to meet the needs of

both entertainment and the lighting industry. We welcome your comments about

our product and services.

It is both a privilege and a pleasure serving you.

3-pin standard DMX IN/OUT ports providing dimmer information

Serves as a Switch Pack or Dimmer Pack, depending upon

the current operating mode.

Allows DMX Addressing, Dim Preset and Dim Limit.

Power failure memory.

4 digits Segment Display shows current activity and

function state.

Comply with HTP principle(Highest takes precedence).

General Instructions

Safe and Efficient Use

Product Care

To prevent fire or shock hazard, do not expose this product to

rain or moisture.

In the event of a malfunction(burning smell, etc.), immediately

stop operation, disconnect the power supply plug, and consult

authorized service personnel.

No user serviceable parts inside, always consult authorized

personnel for repairs.

Take care not to damage the power cord.

Do not make any inflammable liquids, water or metal objects

enter the unit.

This product must be earthed.

Do not dismantle or modify the unit.

Place this unit in a stable location.

Do not use the unit in places subject to excessive humidity,

vibration or bumps.

Unplug the power plug from the sockets when not using the

unit for extended period.

Provide occasional ventilation during use.

This product is intended for indoor use only.

Please read through this operating instructions before installing or using your new

product. After you have finished reading the instructions, put them away in a safe

place for future reference.

1. Overview

1.1 Right Panel

1. Segment LED Display: To show the current activity, correlative values and

function state.

2. DMX In:

3. DMX Out:

4. Local Dim(HTP): To adjust

5. External Remote Jack: For connecting the remote(Sold separately).

6. Menu Button: Press this button to scroll through the main menus. The main

menus include:

7. Up/Down Button:

3-pin XLR male socket, used to receive DMX data.

3-pin XLR female socket, used to send DMX data.

channel lighting intensity and comply with HTP

principle(Highest takes precedence).

Each tap will increase/decrease the value once. Pressing and

holding down will increase/decrease quickly. Or press Up/Down buttons to

change Dim/Switch.

*Special Note: For reducing signal errors and avoiding signal transmission problems

and interference, it is always advisable to connect 120 ohm impedance DMX signal

cable and DMX terminator for signal connection.

General Instructions

Safe and Efficient Use

Product Care

To prevent fire or shock hazard, do not expose this product to

rain or moisture.

In the event of a malfunction(burning smell, etc.), immediately

stop operation, disconnect the power supply plug, and consult

authorized service personnel.

No user serviceable parts inside, always consult authorized

personnel for repairs.

Take care not to damage the power cord.

Do not make any inflammable liquids, water or metal objects

enter the unit.

This product must be earthed.

Do not dismantle or modify the unit.

Place this unit in a stable location.

Do not use the unit in places subject to excessive humidity,

vibration or bumps.

Unplug the power plug from the sockets when not using the

unit for extended period.

Provide occasional ventilation during use.

This product is intended for indoor use only.

Please read through this operating instructions before installing or using your new

product. After you have finished reading the instructions, put them away in a safe

place for future reference.

1. Overview

1.1 Right Panel

1. Segment LED Display: To show the current activity, correlative values and

function state.

2. DMX In:

3. DMX Out:

4. Local Dim(HTP): To adjust

5. External Remote Jack: For connecting the remote(Sold separately).

6. Menu Button: Press this button to scroll through the main menus. The main

menus include:

7. Up/Down Button:

3-pin XLR male socket, used to receive DMX data.

3-pin XLR female socket, used to send DMX data.

channel lighting intensity and comply with HTP

principle(Highest takes precedence).

Each tap will increase/decrease the value once. Pressing and

holding down will increase/decrease quickly. Or press Up/Down buttons to

change Dim/Switch.

*Special Note: For reducing signal errors and avoiding signal transmission problems

and interference, it is always advisable to connect 120 ohm impedance DMX signal

cable and DMX terminator for signal connection.

1. Overview

1.2 Left Panel

9. Output: French socket for Output, 10A MAX.

10.Power In: AC 230V~50Hz, 10A MAX.

11.Fuse: F10A 250V 5x20mm

2. Operation Guide

2.1 DMX Address Mode

1. The Segment Display shows the DMX address

of last change when powering this unit.

If you've selected DMX address 123 for the last

time, then the Segment Display will read 123.

General

Select the appropriate power resource and plug in. The rated voltage of UNI

BAR is only 230V. With the power failure memory function, this unit can recover

the last function state automatically. If the frequency of power is not stable, the

Segment Display will show "AC-0", please wait until the power is stable.

This unit serves as a dimmer pack or a switch pack, depending on operating

mode you've selected.

2. Each tap of the Up or Down button will change

the DMX address once. Pressing and holding

down will change the DMX address quickly.

Once the DMX address is selected, it will be

recorded into the unit automatically.

NOTE:

During DMX addressing, output is disabled.

Note:

DMX Address

Dim/Switch

Dim Preset

Dim Limit

DMX

DMX Address

Dim/Switch

Dim Preset

Dim Limit

DMX

1. Overview

1.2 Left Panel

9. Output: French socket for Output, 10A MAX.

10.Power In: AC 230V~50Hz, 10A MAX.

11.Fuse: F10A 250V 5x20mm

2. Operation Guide

2.1 DMX Address Mode

1. The Segment Display shows the DMX address

of last change when powering this unit.

If you've selected DMX address 123 for the last

time, then the Segment Display will read 123.

General

Select the appropriate power resource and plug in. The rated voltage of UNI

BAR is only 230V. With the power failure memory function, this unit can recover

the last function state automatically. If the frequency of power is not stable, the

Segment Display will show "AC-0", please wait until the power is stable.

This unit serves as a dimmer pack or a switch pack, depending on operating

mode you've selected.

2. Each tap of the Up or Down button will change

the DMX address once. Pressing and holding

down will change the DMX address quickly.

Once the DMX address is selected, it will be

recorded into the unit automatically.

NOTE:

During DMX addressing, output is disabled.

Note:

DMX Address

Dim/Switch

Dim Preset

Dim Limit

DMX

DMX Address

Dim/Switch

Dim Preset

Dim Limit

DMX

2. Operation Guide

2.2 Dim/Switch Pack Mode

1. When the desired DMX addresses are complete,

you can enter the next mode by pressing Menu

button. The segment display will show " d--- ", it

means the Dim Pack Mode is activated now.

2. You can change Dim/Switch Mode by tapping the

Up or Down button. And the segment display will

show "S---", it means the Switch Pack Mode is

activated now.

3. Press Menu button to confirm and enter Switch

Pack Mode consisting of Switch On(S-on) and

Switch Off(S-of).

In the Switch On Mode, output is turned on and

the fixture lights regardless of DMX signal.

2. Operation Guide

2.2 Dim/Switch Pack Mode

4. Tap the Up or Down button to change between

Switch On and Switch Off.

5. Once the Dim/Switch Pack is complete, press

Menu button to return to DMX Address Mode.

DMX Address

Dim/Switch

Dim Preset

Dim Limit

DMX

DMX Address

Dim/Switch

Dim Preset

Dim Limit

DMX

DMX Address

Dim/Switch

Dim Preset

Dim Limit

DMX

---

DMX Address

Dim/Switch

Dim Preset

Dim Limit

DMX

---

DMX Address

Dim/Switch

Dim Preset

Dim Limit

DMX

LOCAL DIM

(HTP)

LOCAL DIM

(HTP)

MaxMax

MinMin

In the Switch Off Mode, output is turned off and

the fixture is controlled by DMX signal. When DMX

level is less than 40%, the fixture goes out; when

DMX level exceeds 40%, the fixture lights. You can

adjust the level by adjusting the Local Dim Knob.

2.3 Dim Limit Mode

1. Press Menu button to enter the next mode. the

Segment Display will show "L-10", it means the

Dim Limit Mode is activated now.

In the Dim Limit Mode, output is turned on and

the fixture lights regardless of DMX signal.

2. Tap the Up or Down button to change the value

within the range of 10%-100%. Each tap will

change the value once, pressing and holding down

will change the value quickly.

Once the Dim Limit Mode is selected, it will be

recorded into the unit automatically.

DMX Address

Dim/Switch

Dim Preset

Dim Limit

DMX

DMX Address

Dim/Switch

Dim Preset

Dim Limit

DMX

MENUMENU

2. Operation Guide

2.2 Dim/Switch Pack Mode

1. When the desired DMX addresses are complete,

you can enter the next mode by pressing Menu

button. The segment display will show " d--- ", it

means the Dim Pack Mode is activated now.

2. You can change Dim/Switch Mode by tapping the

Up or Down button. And the segment display will

show "S---", it means the Switch Pack Mode is

activated now.

3. Press Menu button to confirm and enter Switch

Pack Mode consisting of Switch On(S-on) and

Switch Off(S-of).

In the Switch On Mode, output is turned on and

the fixture lights regardless of DMX signal.

2. Operation Guide

2.2 Dim/Switch Pack Mode

4. Tap the Up or Down button to change between

Switch On and Switch Off.

5. Once the Dim/Switch Pack is complete, press

Menu button to return to DMX Address Mode.

DMX Address

Dim/Switch

Dim Preset

Dim Limit

DMX

DMX Address

Dim/Switch

Dim Preset

Dim Limit

DMX

DMX Address

Dim/Switch

Dim Preset

Dim Limit

DMX

---

DMX Address

Dim/Switch

Dim Preset

Dim Limit

DMX

---

DMX Address

Dim/Switch

Dim Preset

Dim Limit

DMX

LOCAL DIM

(HTP)

LOCAL DIM

(HTP)

MaxMax

MinMin

In the Switch Off Mode, output is turned off and

the fixture is controlled by DMX signal. When DMX

level is less than 40%, the fixture goes out; when

DMX level exceeds 40%, the fixture lights. You can

adjust the level by adjusting the Local Dim Knob.

2.3 Dim Limit Mode

1. Press Menu button to enter the next mode. the

Segment Display will show "L-10", it means the

Dim Limit Mode is activated now.

In the Dim Limit Mode, output is turned on and

the fixture lights regardless of DMX signal.

2. Tap the Up or Down button to change the value

within the range of 10%-100%. Each tap will

change the value once, pressing and holding down

will change the value quickly.

Once the Dim Limit Mode is selected, it will be

recorded into the unit automatically.

DMX Address

Dim/Switch

Dim Preset

Dim Limit

DMX

DMX Address

Dim/Switch

Dim Preset

Dim Limit

DMX

MENUMENU

2. Operation Guide

2.4 Dim Preset Mode

2. Tap the Up or Down button to change the value

within the range of 00-100%. Each tap will change

the value once, pressing and holding down will

change the value quickly.

Once the Dim Preset Mode is selected, it will be

recorded into the unit automatically.

1. Press Menu button to enter Dim Preset Mode.

The Segment Display will show"P-00".

3. Once the Mode is selected, press

Menu button to return to DMX Address Mode.

Dim Preset

DMX Address

Dim/Switch

Dim Preset

Dim Limit

DMX

DMX Address

Dim/Switch

Dim Preset

Dim Limit

DMX

DMX Address

Dim/Switch

Dim Preset

Dim Limit

DMX

Technical Specifications

Power Input ........................................................... AC 230V~60Hz, 10 A max.

Channel Output ................................................................................ 10 A max.

DMX OUT ................................................................ 3-pin XLR female socket

DMX IN ....................................................................... 3-pin XLR male socket

Fuse ................................................................................. F10A 250V 5x20mm

Dimensions ............................................................................... 200x82x67mm

Weight ................................................................................................... 1.1 Kg

Andere Handbücher für UNI BAR

Inhaltsverzeichnis

Andere Elation Beleuchtungsausrüstung Handbücher

Elation

Elation COLOR SPOT 150 Bedienungsanleitung

Elation

Elation KL FRESNEL 8 FC Bedienungsanleitung

Elation

Elation Active Wave 250 Bedienungsanleitung

Elation

Elation ELAR EXTQW FLOOD HP Bedienungsanleitung

Elation

Elation Design Spot 300E Bedienungsanleitung

Elation

Elation UNI BAR Bedienungsanleitung

Elation

Elation ELED STRIP RGBW Bedienungsanleitung

Elation

Elation Platinum Spot LED Bedienungsanleitung

Elation

Elation Design LED Panel 72IP MKII Bedienungsanleitung

Elation

Elation KL Panel KLP001 Bedienungsanleitung

Elation

Elation ELAR EXFLOOD Bedienungsanleitung

Elation

Elation FSH 1000 Bedienungsanleitung

Elation

Elation FUZE PAR Z175 Bedienungsanleitung

Elation

Elation SDC-16 Bedienungsanleitung

Elation

Elation FUZE WASH 500 Bedienungsanleitung

Elation

Elation Design Spot 1400E Bedienungsanleitung

Elation

Elation VISION 575 Bedienungsanleitung

Elation

Elation CUEPIX PANEL Bedienungsanleitung

Elation

Elation Professional SIXPAR 200IP Bedienungsanleitung

Elation

Elation Design Par 575D Bedienungsanleitung

Elation

Elation ELED STRIP 100 Bedienungsanleitung

Elation

Elation Design LED 36MH Bedienungsanleitung

Elation

Elation CUEPIX BATTEN Bedienungsanleitung

Elation

Elation ELAR Tri Brick Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

Alien

Alien RG STAR Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Bedienungsanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung