Electro-Harmonix NANO OPERATION OVERLORD Bedienungsanleitung

NANO OPERATION OVERLORD

Multi-Instrumental Overdrive

Congratulations on your purchase of the NANO OPERATION OVERLORD, a

compact full-featured overdrive and distortion pedal. With the NANO

OVERLORD’s broad range of options and controls you can easily dial in great

drive sounds for any instrument. Active 3-band EQ controls, switchable BOOST

mode, and a dry blend provide versatility for different tones. You can create mild

overdrive to thick distortion, crank the volume to use the pedal as a boost with

or without grit, or generate unconventional sounds like intensely filtered clipping,

all with a few straightforward controls.

WARNING: Your Nano Operation Overlord comes equipped with an Electro-Harmonix

9.6DC-200BI power supply. The Nano Overlord requires 50mA at 9VDC with a center

negative plug. Use of the wrong adapter or a plug with the wrong polarity may damage

your Nano Overlord and void the warranty. Do not exceed 10.5VDC on the power plug.

Power supplies rated for less than 50mA will cause the Nano Overlord to act unreliably.

- FEATURES -

Amp-like JFET overdrive with three gain stages

Switchable boost mode for saturated distortion tones

Active 3-band EQ for ultimate control

Dry blend knob for preserving the instrument’s harmonic content, character,

and full frequency range

Three-position input level sets the gain range perfectly for any instrument

High-quality buffered bypass and soft switching

- MODES OF OPERATION: NORMAL VS. BOOST -

The NANO OVERLORD operates in two modes: NORMAL and BOOST. The

NORMAL mode uses three amp-like JFET gain stages for low to medium gain

sounds. The BOOST mode adds a classic pedal-style overdrive circuit before the

JFET stages to increase overall distortion. BOOST is engaged with the BOOST

pushbutton or an external momentary footswitch, and is active when the blue

LED is lit. In BOOST mode, a fixed amount of additional gain from the BOOST

circuit is fed into the main JFET circuit. The GAIN knob still controls the amount

of overdrive in BOOST mode, with more overall distortion on tap.

- CONTROLS -

GAIN Knob –The GAIN knob controls the amount of overdrive/distortion. As

you turn GAIN clockwise, the amount of input gain increases.

DRY Knob –The DRY knob mixes a clean unaltered signal with the distortion

produced by the NANO OVERLORD. At the minimum position of the DRY knob,

the output is 100% overdrive effect, and at the maximum position the output is

100% clean. This function is useful for preserving the harmonic integrity of your

playing, which is especially important for keyboards or bass. For guitarists, this

feature can be useful if you are stacking the NANO OVERLORD with other drive

pedals, or playing it through an overdriven amplifier.

INPUT LVL Switch –This switch controls the initial input level of your

instrument into the NANO OVERLORD. Use it to set an appropriate gain level for

a variety of instruments. Set the switch to HI for low-level instruments, like a

single-coil guitar or vintage electric piano. Set the switch to NORM for

humbucker guitars and most modern keyboard workstations. Use the LO setting

for high-output instruments, like some synthesizers or boosted guitars.

Tip: The GAIN Knob, INPUT LVL switch, and DRY knob all work together. If

the INPUT LVL switch is set properly, turning the DRY knob should not

significantly change the overall volume. However, varied settings of the INPUT

LVL switch could produce some interesting higher- or lower-gain sounds. Feel

free to experiment with this switch –setting it “wrong” might sound great for

you, and won’t damage the circuit!

BASS Knob –Active control of the level of the bass frequency range.

MID Knob –Active control of the level of the middle frequency range.

TREBLE Knob –Active control of the level of the treble frequency range.

VOL Knob –This knob controls the overall volume output of the NANO

OVERLORD. As this knob is turned clockwise, the output level increases.

Footswitch and red LED –This footswitch selects whether the NANO

OVERLORD is engaged or in buffered bypass mode. When the effect is engaged,

the red LED will be lit.

BOOST Button and blue LED –This button toggles Boost mode on and off.

When in Boost mode, the blue LED will be lit.

- CONNECTIONS -

INPUT Jack –This ¼” jack is the audio input of the NANO OVERLORD. The input

impedance at the INPUT jack is 1M.

OUTPUT Jack –This ¼” jack is the audio output from the NANO OVERLORD. The

output impedance at the OUTPUT jack is 220.

BOOST FSW Jack –This ¼” jack allows an external momentary footswitch to

control toggling Boost mode on and off.

The external switch should be normally open. Upon engaging the switch, it

should create a short circuit between the Tip and Sleeve of the plug inserted into

the BOOST FSW jack on the NANO OVERLORD. Releasing the switch should open

the circuit between the Tip and Sleeve. The BOOST FSW jack is connected in

parallel with the BOOST Button so they can both work at the same time. A

suggested momentary footswitch that has been tested with the NANO

OVERLORD is the Boss FS-5U Momentary Foot Switch.

9V Power Jack –Plug the output of the NANO OVERLORD’s supplied EHX9.6DC

200mA AC Adapter into the 9V power jack located at the top of the pedal. The

NANO OVERLORD requires 50mA with a center negative plug.

- WARRANTY INFORMATION -

Please register online at http://www.ehx.com/product-registration or complete and return

the enclosed warranty card within 10 days of purchase. Electro-Harmonix will repair or

replace, at its discretion, a product that fails to operate due to defects in materials or

workmanship for a period of one year from date of purchase. This applies only to original

purchasers who have bought their product from an authorized Electro-Harmonix retailer.

Repaired or replaced units will then be warranted for the unexpired portion of the original

warranty term.

If you should need to return your unit for service within the warranty period, please

contact the appropriate office listed below. Customers outside the regions listed below,

please contact EHX Customer Service for information on warranty repairs at info@ehx.com

or +1-718-937-8300. USA and Canadian customers: please obtain a Return

Authorization Number (RA#) from EHX Customer Service before returning your product.

Include  with your returned unit  a written description of the problem as well as your

name, address, telephone number, e-mail address, RA# and a copy of your receipt clearly

showing the purchase date.

United States and Canada Europe

EHX CUSTOMER SERVICE JOHN WILLIAMS

ELECTRO-HARMONIX ELECTRO-HARMONIX UK

c/o NEW SENSOR CORP. 13 CWMDONKIN TERRACE

55-01 2ND STREET SWANSEA SA2 0RQ

LONG ISLAND CITY, NY 11101 UNITED KINGDOM

Tel: 718-937-8300 Tel: +44 179 247 3258

Email: [email protected] Email: electroharmonixuk@virginmedia.com

To hear demos on all EHX pedals visit us on the web at www.ehx.com

Email us at [email protected]

- COMPLIANCE -

Note:

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur in

a particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following measures:



Reorient or relocate the receiving antenna.



Increase the separation between the equipment and receiver.



Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.



Consult the dealer or an experienced radio/TV technician for help.

Modifications not expressly approved by the manufacturer could void the user's authority to operate the

equipment under FCC rules.

The CE logo indicates that this product has been tested and shown to conform

with all applicable European Conformity directives

Inhaltsverzeichnis

Andere Electro-Harmonix Musikpedal Handbücher

Electro-Harmonix

Electro-Harmonix TUBE EQ Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix NANO BASS BIG MUFF PI Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix NEXT STEP SERIES Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix DELUXE MEMORY MAN Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix NANO POG Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix DELUXE ELECTRIC MISTRESS Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix Wailer Wah Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix TURNIP GREENS Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix HOLY STAIN Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix nano STEEL LEATHER Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix Grand Canyon Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix FLATIRON FUZZ Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix TONE TATTOO Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix Tube Zipper Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix Holier Grail Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix HOG GUITAR SYNTHESIZER Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix MEL9 Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix Octavix Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix S9 string ensemble Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix NANO BIG MUFF PI Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix XO STEREO CLONE THEORY Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix Triangle Big Muff Pi Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix Memory Boy Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix nano POCKET METAL MUFF Bedienungsanleitung

Beliebte Musikpedal Handbücher anderer Marken

Behringer

Behringer ULTRA WAH UW300 Bedienungsanleitung

Whirlwind

Whirlwind oc-bass Bedienungsanleitung

Strymon

Strymon Lex-rotary Bedienungsanleitung

Behringer

Behringer PB600 Bedienungsanleitung

Lexicon

Lexicon MX200 Bedienungsanleitung

Dunlop

Dunlop Hendrix 68 Shrine Octavio Fuzz Series Bedienungsanleitung

Matthews Effects

Matthews Effects Whaler V2 Bedienungsanleitung

Grid 1

Grid 1 Pedal Jeanie Bedienungsanleitung

Amptweaker

Amptweaker tightboost Bedienungsanleitung

Ibanez

Ibanez TS-808 Tube Screamer Overdrive Pro Bedienungsanleitung

Dimavery

Dimavery EPVP-50 Bedienungsanleitung

Tefi Vintage Lab

Tefi Vintage Lab GEGÈ Bedienungsanleitung

Pro-MIDI

Pro-MIDI G25 Bedienungsanleitung

DW 7000 Bedienungsanleitung

FAMC

FAMC Liquid-Foot Jr. Series Bedienungsanleitung

Dimavery

Dimavery EPOD-50 Overdrive Bedienungsanleitung

TREX

TREX ToneBug Totenschläger Bedienungsanleitung

BBE

BBE ORANGE SQUASH Bedienungsanleitung