Electro-Harmonix HOG GUITAR SYNTHESIZER Bedienungsanleitung

HOG GUITAR SYNTHESIZER

Foot Controller

- DESCRIPTION -

Congratulations on your purchase of the Electro-Harmonix remote Foot

Controller accessory that was built to be a valuable addition to the HOG

GUITAR SYNTHESIZER! The HOG has so many amazing sounds and

possibilities that Electro-Harmonix decided to present a means for storage of

presets. The value of the HOG foot controller will be evident the first time

you are in a performance situation or assembling complex sounds for

recording and playing.

-SETUP -

To properly setup the Foot Controller with a HOG, you will need one

standard guitar cable with a ¼” plug on each end:

Plug one end of the guitar cable into the HOG Guitar SYNTHESIZER

Footswitch jack.

Plug the other end of the guitar cable into the Foot Controller’s jack.

-STORING AND RETREIVING PRESETS –

After you have programmed the exact sound that you want on the HOG

GUITAR SYNTHESIZER, you may then store it to by using the HOG

remote foot controller.

The foot controller has 6 preset switches. Preset 1 through Preset 6. Each

preset with its own footswitch.

When you are ready to store your sound, make sure that the remote is

connected to the HOG GUITAR SYNTHESIZER. Select the preset that you

want to store your program in. Depress and hold the preset switch down, the

LED will blink rapidly for approximately 3 seconds. When the LED light

remains lit, your preset will be stored.

Momentarily depress the switch for the Preset you want to recall and it will

be loaded and ready to play.

WARRANTY INFORMATION

Please register online at http://www.ehx.com/product-registration or complete and return the

enclosed warranty card within 10 days of purchase. Electro-Harmonix will repair or replace, at

its discretion, a product that fails to operate due to defects in materials or workmanship for a

period of one year from date of purchase. This applies only to original purchasers who have

bought their product from an authorized Electro-Harmonix retailer. Repaired or replaced units

will then be warranted for the unexpired portion of the original warranty term.

If you should need to return your unit for service within the warranty period, please contact the

appropriate office listed below. Customers outside the regions listed below, please contact EHX

Customer Service for information on warranty repairs at info@ehx.com or +1-718-937-8300.

USA and Canadian customers: please obtain a Return Authorization Number (RA#) from

EHX Customer Service before returning your product. Include  with your returned unit  a written

description of the problem as well as your name, address, telephone number, e-mail address,

RA# and a copy of your receipt clearly showing the purchase date.

United States and Canada Europe

EHX CUSTOMER SERVICE JOHN WILLIAMS

ELECTRO-HARMONIX ELECTRO-HARMONIX UK

c/o NEW SENSOR CORP. 13 CWMDONKIN TERRACE

47-50 33RD STREET SWANSEA SA2 0RQ

LONG ISLAND CITY, NY 11101 UNITED KINGDOM

Tel: 718-937-8300 Tel: +44 179 247 3258

Email: info@ehx.com Email: electroharmonixuk@virginmedia.com

To hear demos on all EHX pedals visit us on the web at www.ehx.com

Email us at info@ehx.com

Important: The Electro-Harmonix Foot Controller obtains all of its power

from the HOG GUITAR SYNTHESIZER. Use only a standard ¼” guitar cable

to connect the Foot Controller to the HOG. A standard guitar cable has Tip

and Sleeve conductors. The Foot Controller does not require batteries or an

AC Adapter.