Electro-Voice EVID-C4.2LP Bedienungsanleitung

EVID Ceiling Speaker Systems

EVID C8.2HC | EVID C10.1

en Installation manual

EVID Ceiling Speaker Systems Table of contents | en 3

Electro-Voice Installation manual 2018.09 | 11 | F.01U.177.705

Table of contents

1Safety 4

1.1 Notices 4

2Welcome 5

2.1 Important Features 5

3System overview 6

3.1 Model Summary 6

3.2 Packing list 7

3.3 Product Feature Identification 8

4Installation and Wiring 10

4.1 Step 1 — Cut the Hole 11

4.2 Step 2 — Install C-Ring and/or Tile Rails 11

4.3 Step 3 — Attach Wiring to the Terminal Connector 12

4.4 Step 4 — Secure the Cable to the Speaker 14

4.5 Step 5 — Mount the Speaker into the Ceiling 15

4.6 Step 6 — Connect an Auxiliary Support Line 16

4.7 Step 7 — Adjust Tap Selector 17

4.8 Step 8 — Attach the Grille 17

5Troubleshooting 19

6Technical data 20

7Appendices 24

7.1 Appendix A — Painting the Speaker 24

7.2 Appendix B — System Design Guide 24

7.2.1 Selecting and Positioning Ceiling Loudspeakers 24

7.2.2 Ceiling Systems: Size vs. Coverage 25

7.2.3 Use of Subwoofers 27

4en | Safety EVID Ceiling Speaker Systems

2018.09 | 11 | F.01U.177.705 Installation manual Electro-Voice

1 Safety

Caution!

The seismic tab (auxiliary support ring) is not intended for primary suspension of the

loudspeaker. The seismic tab should only be used as a secondary safety point.

Caution!

Ceiling mount speaker’s safety cable

The safety cable should be installed with 1-3 inches (25.4-76.2 mm) of slack.

Notice!

ATTENTION: UL SAFETY LISTING

All EVID ceiling speaker models are listed under UL standard UL1480A as a signaling speaker.

All models are also suitable for use in air handling spaces per UL2043.

1.1 Notices

Old electrical and electronic appliances

Electrical or electronic devices that are no longer serviceable must be collected separately and

sent for environmentally compatible recycling (in accordance with the European Waste

Electrical and Electronic Equipment Directive).

To dispose of old electrical or electronic devices, you should use the return and collection

systems put in place in the country concerned.

any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior

written permission of the publisher. For information on getting permission for reprints and

excerpts, contact Bosch Security Systems, Inc.

All content including specifications, data, and illustrations in this manual are subject to change

without prior notice.

EVID Ceiling Speaker Systems Welcome | en 5

Electro-Voice Installation manual 2018.09 | 11 | F.01U.177.705

2 Welcome

Thank you for purchasing EVID Ceiling Series loudspeakers. Read through this manual to

familiarize yourself with features, applications, and precautions before you use these

products.

EVID Ceiling Series loudspeakers use innovative design and materials to provide premium-level

performance in a flush-mount ceiling format. Seven models comprise the EVID Ceiling Series:

the C4.2 and the C4.2LP with a 4-inch LF driver and a 0.75-inch, titanium coated tweeter with

waveguide; the C6.2 with a 6.5-inch LF driver and a 1-inch titanium-coated tweeter; the C8.2

and the C8.2LP with an 8-inch LF driver and a 1-inch titanium-coated tweeter; the C8.2HC

with a fully waveguide loaded 8-inch LF driver and a 1-inch titanium coated tweeter; and the

EVID C10.1, a true ceiling-mounted subwoofer designed to augment and extend the full-range

model’s low-frequency response.

2.1 Important Features

– Matches acoustically to the EVID surface-mount speaker lines

– Model for model, has superior performance to competing brands

– Comes with both 70V/100V or 8-ohm operation standard on every model

– Includes all installation accessories commonly needed for most jobs

6en | System overview EVID Ceiling Speaker Systems

2018.09 | 11 | F.01U.177.705 Installation manual Electro-Voice

3 System overview

3.1 Model Summary

EVID C4.2

Perfect for conventional rooms. It has excellent bandwidth in an esthetically very unobtrusive

installation profile. Its compact design fits in tight areas. Its 4-inch woofer and waveguide-

coupled, titanium-coated dome tweeter give smooth, wide frequency response. The enclosure

is ported and tuned to provide surprising bass response in such a compact package. Features

an easy 3-point mounting system for quick installations.

EVID-C4.2LP

The C4.2LP is the same as the C4.2 but in a low-profile installation package, ideal for tight

ceiling spaces. It’s 3.7” deep to fit the tightest spaces, and shares the same outside diameter

as the C6.2, C8.2, and C8.2LP speakers, so it can be used in combination with any of these

models without any visual differences.

EVID-C6.2

The C6.2 has a specially tuned enclosure and 6.5-inch woofer to provide amazing bass

response. The 1-inch tweeter gives smooth controlled coverage out to 20 kHz. Perfect for

installations where a flush-mount design is desired but demand for high-quality audio exists.

Features a 4-point mounting system to make installations fast and easy.

EVID C8.2

The C8.2 has a specially tuned enclosure and 8-inch woofer to provide amazing bass response.

The 1-inch waveguide-coupled tweeter gives smooth controlled coverage out to 20 kHz.

Perfect for installations where a flush-mount design is desired but demand for high-quality

audio exists. Features a 4-point mounting system to make installations fast and easy.

EVID C8.2LP

The C8.2LP is the same as the C8.2 but in a low-profile installation package. Ideal for tight

ceiling spaces.

EVID C8.2HC

The EVID C8.2HC is ideal for high ceilings and reverberant “problem” rooms. Its exclusive

ported, waveguide-coupled, 8-inch driver provides excellent intelligibility and definition. The

8.2HC’s patent pending design provides great coverage control throughout the voice range

and above. No other ceiling speaker system provides the combination of excellent pattern

control, wide bandwidth, high power handling, and compact design like the C8.2HC.

EVID C10.1

The C10.1 packs a 10-inch subwoofer in a tuned high performance enclosure to give amazing

low frequency performance down to 45 Hz! It is one of the few quick-mount ceiling TRUE

subwoofers available. Flexible installation and powerful low-end performance make it the ideal

mate to any EVID ceiling model.

EVID Ceiling Speaker Systems System overview | en 7

Electro-Voice Installation manual 2018.09 | 11 | F.01U.177.705

3.2 Packing list

Item Quantity Part

A 2 Speaker system

B 4 Tile rails

C 2 C-ring support

D 2 Grille

E 1 Owner’s manual

F 4 Support ring screws

G 2 Terminal connector

H 1 Service center card

I 1 Cutout template

J 2 Paint shield

C (x2)

B (x4)

J (x2)

A (x2)

D (x2)

G (x2)F (x4)

Figure3.1: EVID packing list

8en | System overview EVID Ceiling Speaker Systems

2018.09 | 11 | F.01U.177.705 Installation manual Electro-Voice

3.3 Product Feature Identification

EVID C4.2, EVID-C6.2, EVID C8.2, EVID C8.2LP, EVID C8.2HC, and EVID C10.1 models

Grille

Figure3.2: Bottom of the speaker (left); Top of the speaker (center); Grille (right)

Item Description Item Description

1 Steel back can 6 Removable input terminal connector

2 Mounting screws 7 Seismic tab (auxiliary support ring)

3 Tap selector 8 Strain relief fitting

4 Grille safety tether hole 9 Terminal cover plate

5 Rotating mounting tabs 10 Grille safety tether

C4.2LP model

12 3

410

Grille

Figure3.3: Bottom of the speaker (left two illustrations); Top of the speaker (center); Grille (right)

Item Description Item Description

1 Mounting screws 7 Terminal cover plate

2 Grille safety tether hole 8 Removable input terminal connector

3 Tap selector 9 Terminal cover latch

4 Rotating mounting tabs 10 Steel back can

5 Terminal cover locking screw 11 Seismic tab (auxiliary support ring)

6 Strain relief fitting 12 Grille safety tether

EVID Ceiling Speaker Systems System overview | en 9

Electro-Voice Installation manual 2018.09 | 11 | F.01U.177.705

EVID Ceiling Series Systems (sold in pairs)

Model Part No Description

EVID C4.2 4" coaxial speaker with horn-loaded, Ti-coated tweeter

EVID-C4.2LP 4" coaxial speaker with horn-loaded, Ti-coated tweeter

EVID-C6.2 6.5" coaxial speaker, Ti-coated tweeter

EVID C8.2 8" coaxial speaker with horn-loaded, Ti-coated tweeter

EVID C8.2LP Same as C8.2 above except with low-profile back can

EVID C8.2HC 8" waveguide-coupled coaxial speaker with horn-loaded, Ti-coated tweeter

EVID C10.1 10" High performance subwoofer

EVID Series Ceiling Mount Speaker Accessories

Model Part No. Description

RR-42-B Rough-in plate for new construction involving the EVID C4.2 (package of 4)

RR-82 Rough-in plate for new construction involving the EVID-C4.2LP, EVID-C6.2, C8.2,

and C8.2LP (package of 4)

RR-810 Rough-in plate for new construction involving the EVID C8.2HC and C10.1 (package

of 4)

RPK-42 Rough-in package for new construction involving the C4.2 speaker only (package of

RPK-82 Rough-in package for new construction involving the EVID-C4.2LP, EVID-C6.2, C8.2,

and C8.2LP speaker only (package of 2)

RPK-810-B Rough-in package for new construction involving the C8.2HC and C10.1 speaker

only (package of 2)

NOTE: All products are not available in all regions.

10 en | Installation and Wiring EVID Ceiling Speaker Systems

2018.09 | 11 | F.01U.177.705 Installation manual Electro-Voice

4 Installation and Wiring

The EVID mounting system has been designed so that, if necessary, the installation can be

done from beneath the ceiling. In some cases with a suspended ceiling grid, however, it may

be easier to access from both the top and bottom of the ceiling tile during the installation

process. Typical installation hardware needed for either suspended ceilings or sheetrock

ceilings is included. The ceiling speaker assembly is held in place by mounting tabs that

securely grip the ceiling material. Input wiring is attached to a removable terminal block

connector that can be prewired if necessary before speaker installation to speed up the

installation process.

INSTALLATION NOTE: USE OF OPTIONAL ROUGH-IN ACCESSORIES

For most installations, no additional hardware is needed. However, a two-step installation

procedure that is sometimes used for installation into sheetrock ceilings can be made easier

by the use of the optional RR and RPK series of rough-in accessories before the ceiling

material is installed. The rough-in accessories provide a cutout guide when many holes are to

be made in a production-line style installation and to ensure the speakers are positioned

correctly as the holes are cut in the sheetrock. Depending on the requirements, two types of

rough-in accessories are available.

RR Series Mounting Plates

RR series plates are made of flat sheet metal with holes to attach to the joists or trusses of a

building structure. The holes are drilled for nails or screws at 16 inches (406 mm), 20 inches

(508 mm) and 24 inches (610 mm) on-center. The installer can drill other holes as needed up

to a maximum of 24-3/4 inches (630 mm) apart. The sheetrock installs over the plate and the

plate provides a template for a blind cutout of the hole in the sheet rock. The ceiling material

is generally cut with a router-type cutting tool, using the plate ring as a cutout guide.

Figure4.1: Speaker mounting plate

RPK Series Kits

The RPK series rough-in kit contains a RR series plate with a standard 2 gang electrical box

mounted on the top with an attached short length of flexible conduit which connects to the

ceiling speaker conduit clamp on the speaker’s rear terminal cover. This accessory allows for

rigid conduit to be run to the box on the rough-in plate before the speaker or any sheetrock is

installed. After the sheetrock is installed the speaker can be wired up and mounted all from

below the ceiling.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Electro-Voice Sprecher Handbücher

Electro-Voice

Electro-Voice ZX1i Series Bedienungsanleitung

Electro-Voice

Electro-Voice SB121 Bedienungsanleitung

Electro-Voice

Electro-Voice Plasma Series Bedienungsanleitung

Electro-Voice

Electro-Voice SX300PI Montageanleitung

Electro-Voice

Electro-Voice Force 15 Bedienungsanleitung

Electro-Voice

Electro-Voice ZLX-12P-AX Bedienungsanleitung

Electro-Voice

Electro-Voice S-181 Montageanleitung

Electro-Voice

Electro-Voice ZX3 Bedienungsanleitung

Electro-Voice

Electro-Voice EVID C8.2LP Bedienungsanleitung

Electro-Voice

Electro-Voice ZX Series ZX1i Gebrauchsanweisung

Electro-Voice

Electro-Voice Xi Series Xi-1183A/64F Handbuch

Electro-Voice

Electro-Voice Variplex-XL Bedienungsanleitung

Electro-Voice

Electro-Voice QRx 115/75 Bedienungsanleitung

Electro-Voice

Electro-Voice EVOLVE50M-SB-EU Bedienungsanleitung

Electro-Voice

Electro-Voice EVX-150A Bedienungsanleitung

Electro-Voice

Electro-Voice S-40 Bedienungsanleitung

Electro-Voice

Electro-Voice SL6.2M Bedienungsanleitung

Electro-Voice

Electro-Voice Sb120 Bedienungsanleitung

Electro-Voice

Electro-Voice Premium Surface Mount Speakers Installations- und Betriebsanleitung

Electro-Voice

Electro-Voice SxA100+ Bedienungsanleitung

Electro-Voice

Electro-Voice Xi Series Xi-1191A Handbuch

Electro-Voice

Electro-Voice Xi Series Xi-1123A/106F Bedienungsanleitung

Electro-Voice

Electro-Voice SPA75 Dimensionsleitfaden

Electro-Voice

Electro-Voice Loudspeaker Xi-Series Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung

Tannoy

Tannoy SYSTEM 600a Bedienungsanleitung