ELECTROCOMPANIET ECP1 MC Bedienungsanleitung

ECP1 MC/MM

Phono Preampliﬁer

Owner’s Manual

ENG

The design features of ECP1 PHONO Preamplifier

After the Electrocompaniet 25 watt amplifier had established a new standard for transistor

amplifiers, research was undertaken to find ways to make the amplifier even better, and to

extend its highly musical sound quality to more powerful amplifier designs. Only reducing

the commonly recognized types of distortion to low levels did not satisfy the engineers of

Electrocompaniet. They recognized that distortion appears in many forms, and that distort-

ion was still audible in listening tests even when conventional categories of distortion were

at vanishing low levels.

Traditionally, designers increased feedback to make a larger portion of the output signal

control the amplifiers response. Our listening tests showed us that simply applying more

feedback was not the answer. In fact, as one kind of distortion went down, other parame-

ters would be adversely affected, leading to an overall degradation of sound quality. We

knew that the other conventional design approach of eliminating feedback completely was

not the answer either, because this would cause high distortion levels, and as a result

“wooly” sound.

The answer to the dilemma was found in a novel approach to feedback theory. We

developed a feedback concept that allowed local feedback to be applied around indivi-

dual stages of the amplifier circuit. This approach allowed us to avoid the sonic

disadvantages of overall feedback from output to input. The concept was further developed

to reduce phase and interphase distortion between stages of the amplifier as well. We

were able to concentrate the loop feedback on the stages of the amplifier where it resulted

in audible improvement.

Stability margins were also expanded because feedback no longer affected the frequency

response. The use of this concept of individual gain blocks - complex in design but simple

in function - allowed us to reduce distortion to minute values in all the products.

Unpacking the preamplifier:

Immediately upon receipt of the preamplifier, inspect the carton for possible damage

during shipment. If the carton is visibly damaged, a claim must be filed with the carrier as

soon as possible.

Unpack the unit carefully, and please do remember to save all packaging materials for

future shipment. The carton and packaging have been designed to offer the safest possible

protection when transporting your amplifier, for the prevention of damage to the unit.

The content of the carton is as follows:

1 pcsECP1 Phono Preamplifier

1 pcs Electrocompaniet AC adapter

1 pcs Owners Manual

Connecting ECP1 Phono preamplifier

Connecting to mains

Check that the mains voltage printed on the AC adapter corresponds with the line voltage

in the territory were you intend to connect your preamplifier.

The rear panel

The rear panel of the ECP1 contains all input- and output connectors. The printed rear

panel clearly indicates the function of each connector.

How to avoid noise problems

The ECP1 preamplifier contains circuitry that might be sensitive to magnetic fields. The set

should be placed well away from transformers, etc. Care should also be taken in routing all

signal cables. They should not run parallel to speaker cables or AC cables mains). Keep

cables as short as possible. For minimum hum, the preamplifier should be places on the

right side of the power amplifier because of the location of the MC circuitry). If placed

above a power amplifier, leave at least 4" 110 cm) of space between the top of the

amplifier and bottom of the preamplifier.

How to avoid damages

A good operating practice is to turn off all equipment before any connection or

disconnection are made. Do not under any circumstances connect or disconnect

equipment when power is turned on. If you insist on connecting or disconnecting while

power is turned on, you should be aware that the design of the RCA plug generates a

large transient when inserting the plug. This could damage both the speakers and the

amplifier.

Switches

The MC/MM switch is located at the rear of the unit, and LED in the frontpanel indicate the

selected type of cartridge.

ALWAYS turn the volume control all the way down before changing from MM/MC or MC/

MM.

Warning:

The preamplifier will be warm.

Due to the high class A operating point used in the Electrocompaniet design, it is normal

that the preamplifier feels warm. Proper ventilation will be needed, and the preamplifier

should not be covered up. A good rule is to allow 1 - 2 inches of space sidewise, and 2 - 3

inches above the preamplifier.

Service Policy:

If service is needed

Your dealer will have all relevant information about the service centers in your area, and

will ensure that your unit is serviced without delay. It is our general policy to have your

preamplifier returned to you within 5 working days. This is an average time, and could vary

locally, depending on the workload at the service center.

If, for some reason, there are no service facilities available in your country, please ship the

preamplifier to the following adress:

Electrocompaniet as,

Breivikveien 7,

N-4120 Tau,

Norway

Service department: [email protected]

Web: www.electrocompaniet.com

You are responsible for all shipping charges, insurance, re-importation to your country, and

duty arrangements. When shipping a product to the factory for service, always include the

following:

1) A sales slip or other proof of purchase if repair is claimed under warranty.

2) A proforma invoice with value of the goods, stating that the preamplifier is returned

to Norway for repair.

3) An accompanying letter describing faults, symptoms, or problems with the

preamplifier.

3) Always ship the preamplifier in its original carton and packaging material to prevent

damage in transit.

Electrocompaniet will not cover damages incurred in transit.

If you require further information concerning the preamplifier operation, or if you have any

questions related to service, please do not hesitate to contact your dealer or national

Electrocompaniet let distributor.

Technical Specifications: ECP1

The following technical data were measured on randomized test objects and were typical

data. All measurements are made with the following equipment:

Distortion analyzer: Tektronix M50 1

Oscilloscope: Tektronix 468

Oscillator: Tektronix 5G505

Frequency counter: Rascal 9838

Phase meter: Hewlett Packard 3575A

Phono stage

Phono input to record output

Gain 1 KHz Moving Coil (source impedance = 10 ohm) 73 dB (4500x)

Gain 1 KHz Moving Magnet 34.8 dB (55x)

Input Impedance Moving Magnet 47 Kohm/22pF

THD 1 KHz (2V output) less than 0.007%

Overload 1 KHz Moving Coil (THD = 0,2%) more than 2 mV

Overload 1 KHz Moving Magnet )THD = 0,2%) more than 165mV

Channel separation )iV output at 1 KHz) more than 80dB

Noise ref. 0,5 mV) Moving Coil -88 dB

Noise (ref. 5 mV) Moving Magnet -88 dB

Equivalent input noise 400 Hz - 300 KHz) 0,2 uV

RIM Accuracy (20 Hz - 20 KHz) +/-0,1 dB

Output impedance 100 ohm

Dimensions

Width 240mm (9.5 inches)

Depth 165 mm (6.5 inches)

Height 65 mm (2.5 inches)

Weight 2.2 kg (4.4lbs)

Made in Norway

W W W .ELECTRO COM PANIET.NO

Dieses Handbuch passt für folgende Modelle

Andere ELECTROCOMPANIET Verstärker Handbücher

ELECTROCOMPANIET

ELECTROCOMPANIET EC4R Bedienungsanleitung

ELECTROCOMPANIET

ELECTROCOMPANIET AW 300 Bedienungsanleitung

ELECTROCOMPANIET

ELECTROCOMPANIET ECI3 Bedienungsanleitung

ELECTROCOMPANIET

ELECTROCOMPANIET AW220 Bedienungsanleitung

ELECTROCOMPANIET

ELECTROCOMPANIET EC-3 Bedienungsanleitung

ELECTROCOMPANIET

ELECTROCOMPANIET AW400 Bedienungsanleitung

ELECTROCOMPANIET

ELECTROCOMPANIET ECI 6DX MKI Bedienungsanleitung

ELECTROCOMPANIET

ELECTROCOMPANIET AW600 NEMO Bedienungsanleitung

ELECTROCOMPANIET

ELECTROCOMPANIET ECI 6 Bedienungsanleitung

ELECTROCOMPANIET

ELECTROCOMPANIET AW 2x120 Bedienungsanleitung

ELECTROCOMPANIET

ELECTROCOMPANIET ECI3 Bedienungsanleitung

ELECTROCOMPANIET

ELECTROCOMPANIET ECP 2 MKII Bedienungsanleitung

ELECTROCOMPANIET

ELECTROCOMPANIET ECI 5 MKII Bedienungsanleitung

ELECTROCOMPANIET

ELECTROCOMPANIET AW 250R Bedienungsanleitung

ELECTROCOMPANIET

ELECTROCOMPANIET ECI 6D Bedienungsanleitung

ELECTROCOMPANIET

ELECTROCOMPANIET PI-1 Bedienungsanleitung

ELECTROCOMPANIET

ELECTROCOMPANIET EC 4.8 MKII Bedienungsanleitung

ELECTROCOMPANIET

ELECTROCOMPANIET EC 4.8 Bedienungsanleitung

ELECTROCOMPANIET

ELECTROCOMPANIET ECI 6DX Bedienungsanleitung

ELECTROCOMPANIET

ELECTROCOMPANIET ECC-1 Bedienungsanleitung

ELECTROCOMPANIET

ELECTROCOMPANIET ECI2 Bedienungsanleitung

ELECTROCOMPANIET

ELECTROCOMPANIET AW-250 Bedienungsanleitung

ELECTROCOMPANIET

ELECTROCOMPANIET AW 180 Bedienungsanleitung

ELECTROCOMPANIET

ELECTROCOMPANIET AW 120 Bedienungsanleitung

Beliebte Verstärker Handbücher anderer Marken

ASTRO

ASTRO HVO V40 P Bedienungsanleitung

Marantz

Marantz SUPERSCOPE BLA-545 Montageanleitung

NAD

NAD CI980 Bedienungsanleitung

Technics

Technics SE-CH770 Bedienungsanleitung

Harman Kardon

Harman Kardon HK6300 Bedienungsanleitung

NAD

NAD T975 Bedienungsanleitung

McIntosh

McIntosh MA6850 Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Bedienungsanleitung

Viatron

Viatron Autrix Bedienungsanleitung

GME

GME GA9800 Bedienungsanleitung

Atlas

Atlas CP700 Bedienungsanleitung

Roland

Roland KC-1000 Bedienungsanleitung

Pyle

Pyle PFMRA350BW Bedienungsanleitung

Advantage

Advantage S-250 Bedienungsanleitung

IRT Electronics

IRT Electronics DVA-3007 Bedienungsanleitung

Dimavery

Dimavery BA-100 Series Bedienungsanleitung

Sony

Sony XM-S400D Bedienungsanleitung

Schertler

Schertler ROY X Bedienungsanleitung