Elite Screens Manual SRM Pro Series Gebrauchsanweisung

Elite Screens Slow Retract Manual Series Square Housing Dimension Table

Manual SRM Pro Series

Unit: mm

Model

Screen

diagonal

Aspect

ratio

Overall

case

length (A)

Screen

material

Width.

（

）

View

width

(A1)

Weight

bar

length

(A3)

Bottom

black

masking

border

with

weight

bar

（

）

Screen

material

Height with

weight bar

(B3)

View

Height

(B1)

Screen

overall

height

with

weight

bar

(

End

cap

height

(B4)

End

cap

width

(C)

Distance

from

screen

material

to the

wall (C1)

Top

black

masking

border

(B5)

G.W.

(KGS)

(mm)

M84HSR-Pro 84" 16:9 2014 1936 1860 2010 62 1298 1046 1394 96 80 20 190 8,24 2112 140 132

M100HSR-Pro 100" 16:9 2374 2290 2214 2370 62 1517 1245 1613 96 80 20 210 9,58 2472 140 130

M120HSR-Pro 120" 16:9 2816 2733 2657 2812 62 1746 1494 1842 96 80 20 190 #### 2984 160 140

M84VSR-Pro 84" 4:3 1867 1783 1707 1863 62 1432 1280 1528 96 80 20 90 9,24 1965 150 140

M100VSR-Pro 100" 4:3 2192 2108 2032 2188 62 1766 1524 1862 96 80 20 180 9,48 2290 145 140

M120VSR-Pro 120" 4:3 2598 2514 2438 2594 62 2066 1829 2162 96 80 20 175 #### 2666 140 135

Packing dimension

Note: Data Error ±1"

* Dimension Table is only for reference, actual item might be different. Subject to change w/o notice.

www.elitescreens.eu

Manual SRMPro

QUICK USER’S GUIDE

Screen Installation

A. Flush Wall Installation

1. Measure the distance of the keyholes on the end caps and mark the location of where

the screen is to be installed for the pre-drilled hole.

2. After marking the area and drilling the hole, insert the proper screw into the drilled hole

and leave about 1/8” of an inch from the wall to mount the screen.

3. Mount your screen from the keyhole located on back of screen’s left and right end caps.

Note: Do not remove the end caps to mount the screen to the wall.

Removing the end caps will release the tension of the internal spring mechanism.

(additional

hardware

required)

Optional

installation using

chains to hang the

screen from the ceiling.

1. You can also hang the screen on a ceiling by using a

chain (not included) and hang it by the two D-ring loops

located on the left and right side end caps.

Wall Mounting Screws Tip: For drywall installations, drywall

anchors and screws can be utilized to hang the screen from the

keyholes of the end caps. Please consult with a hardware store

for for your specific wall or ceiling installation.

Screen Operation

1. Pull the screen down from the lanyard or from the

handle only in a 90-degree angle. The screen is designed to

stop at any location. To achieve this, make sure to pull

straight down and allowing the screen to come up to lock

into place. Do not attempt to pull the screen down by the

surface or touch the screen, as it will damage the screen

and void the warranty.

2. To retract the screen, simply pull the screen down

more than 2 inches and retract the screen back releasing it

up gently. The screen is equipped with a SLOW

RETRACT MECHANISM which allows the screen to

slowly retract without the need to hold on to the handle or

lanyard.

Simply release the handle and the screen will retract by itself into the housing.

Attention: If the screen does not unlock, carefully pull the screen straight down with a little force. Always

pull the screen down at a 90 degree angle.

Side view

Front view

Keyhole located on

back of end cap

B. Ceiling Installation

proper

screws

D-ring

___________________________________

www.elitescreens.eu

shop@elitescreens.eu

ELITE SCREENS

How to adding the spring force for Manual SRM Pro screen

1. Put the screen on the clean table, pull the material down a little and make it is in the

locked state. As the picture shown below.

2. Remove the screws on the left end cap with a screwdriver, and remove the left end cap,

and move the axis out a little. As the picture shown below.

3. Install the left end cap , rotating it in clockwise direction, release the locking, use one

hand to hold the axis, remove the end cap to release the spring force.（This step need

to be operated twice, to prevent the original spring force didn’t remove completely

___________________________________

www.elitescreens.eu

shop@elitescreens.eu

and affect the effect of re-adding the spring force）

4. Install the left end cap on the plastic part of the spring, rotating it in clockwise

direction to add the spring force(rotating 10 laps), rotating it to a jammed point, that is,

you feel the spring will not reverse by itself ,then you can release your hand.(when

adding the spring force, pay attention to hold the end cap tightly to avoid it turn over

and hitting hand)

5. Hold the right end cap with hand, pull up the axis with a rope, then at the other end

need another person to pull the axis into the housing ,insert the axis into the right end

cap inner slot .

right end cap left end cap

___________________________________

www.elitescreens.eu

shop@elitescreens.eu

6. Fixed the left end cap with the screws.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Elite Screens Projektionsfläche Handbücher

Elite Screens

Elite Screens EDGE FREE Aeon CineWhite UHD 2 Series Bedienungsanleitung

Elite Screens

Elite Screens MicroFlip Screen Bedienungsanleitung

Elite Screens

Elite Screens F60XWV1 Bedienungsanleitung

Elite Screens

Elite Screens EDGE FREE Aeon Series Bedienungsanleitung

Elite Screens

Elite Screens ezCinema Series Bedienungsanleitung

Elite Screens

Elite Screens Evanesce B Series Kurzanleitung

Elite Screens

Elite Screens ezFrame CineGrey 5D Bedienungsanleitung

Elite Screens

Elite Screens Kestrel Stage B NTC Series Bedienungsanleitung

Elite Screens

Elite Screens Insta-DE Series Bedienungsanleitung

Elite Screens

Elite Screens Manual Series Bedienungsanleitung

Elite Screens

Elite Screens VMAX 2 Series Bedienungsanleitung

Elite Screens

Elite Screens Insta-DEM Screen Series Bedienungsanleitung

Elite Screens

Elite Screens ezFrame Series Bedienungsanleitung

Elite Screens

Elite Screens Pop-Up Cinema Series Bedienungsanleitung

Elite Screens

Elite Screens 2 CLR Series Bedienungsanleitung

Elite Screens

Elite Screens CineTension 2 Series Bedienungsanleitung

Elite Screens

Elite Screens Evanesce B Series Bedienungsanleitung

Elite Screens

Elite Screens Spectrum Series Bedienungsanleitung

Elite Screens

Elite Screens PowerMax Series Bedienungsanleitung

Elite Screens

Elite Screens ezCinema Series Bedienungsanleitung

Elite Screens

Elite Screens TE100HC2 Bedienungsanleitung

Elite Screens

Elite Screens F60XWV1 Bedienungsanleitung

Elite Screens

Elite Screens Raptor Series Bedienungsanleitung

Elite Screens

Elite Screens Evanesce Tension B Series Bedienungsanleitung

Beliebte Projektionsfläche Handbücher anderer Marken

FART PRODUKT

FART PRODUKT Standard SCREEN Bedienungsanleitung

Draper

Draper E Series Handbuch

Laarhoven

Laarhoven Companion II Bedienungsanleitung

Renogy

Renogy RMS-LFPS-US Bedienungsanleitung

Da-Lite

Da-Lite ExecutiveElectrol Bedienungsanleitung

Samsung

Samsung S*H65* Bedienungsanleitung

FONESTAR

FONESTAR PPTR-43100-FA Bedienungsanleitung

Slide Clear

Slide Clear Varro XL Bedienungsanleitung

OS РХ-090Н Bedienungsanleitung

Niko

Niko 10-845 Bedienungsanleitung

Speaka Professional

Speaka Professional 2357532 Betriebsanleitung

Sima

Sima XL-72 Bedienungsanleitung

Jasic

Jasic EVO 2.0 ET-200P Bedienungsanleitung

InFocus

InFocus SC-WALL GRY-92H Handbuch

Barco

Barco OverView MVL-615 Bedienungsanleitung

Draper

Draper Envoy Handbuch

SI Dynamic 2 XL Bedienungsanleitung

Draper

Draper Nocturne+ E Montageanleitung