Elk BAPPU-evo Montageanleitung

EN The original operating manual is in German.

Status: 03/2023

Multi-measuring device for workplace analysis BAPPUevo
Inhalt
1.            BAPPUevo                                                                                                                        4  
1.1.  Sym ols............................................................................................................5
1.2.  Security alert.....................................................................................................5
Use personal protective equipment (PPE)............................................5
1.3.  General information..........................................................................................6
1.4.  Qualification of the operating personnel...........................................................6
1.5.  O serve accident prevention regulations.........................................................6
1.6.  Intended use.....................................................................................................6
1.7.  Technical changes............................................................................................7
1.8.  Initial assem ly.................................................................................................7
1.9.  Delivery contents..............................................................................................7
1.10.  Optinal Sensor..................................................................................................7
1.11.  Optional accessories........................................................................................7
1.12.  Disposal............................................................................................................8
1.13.  Support.............................................................................................................8
1.14.  Cali rating BAPPU-evo....................................................................................8
1.15.  Technical data and measuring range................................................................8
Permissible operating conditions...........................................................8
Measuring range and tolerances...........................................................9
Specifications of t e measurement wit  VOCOOsx............................10
Available sensors in VOCOOsx..........................................................10
Specifications for noise level measurement........................................10
Frequency weig ting and permissible errors.......................................11
Equivalent continuous sound level......................................................11
Using t e optional sound level calibrator.............................................12
Special features for t e measurement of illuminance.........................13
Self-trigger of t e illumination measurement.......................................13
Special features for temperature measurement..................................13
Special features of IR temperature measurement..............................13
Commissioning....................................................................................14
Supply voltage.....................................................................................15
C arging function................................................................................15
2.            Glossary                                                                                                                          16   
2.1.  BAPPU-measurement....................................................................................16
2.2.  workplace........................................................................................................16
2.3.  workplace list..................................................................................................16
2.4.  Workplace type...............................................................................................16
2.5.  Measurement series profile (Profile)...............................................................16
2.6.  Measurement result overview (overview).......................................................17
2.7.  Measurement value details.............................................................................17
2.8.  Repeat measurement.....................................................................................17
2.9.  Recording........................................................................................................17
3.            Operating instructions                                                                                                     17   
3.1.  Display and touch screen...............................................................................17
Sensitive areas....................................................................................18
page 1 comp   a  c  t   manual   
  status 03/2023

BAPPUevo Multi-measuring device for workplace analysis
Function buttons..............................................................................18
3.2.  Key oard.....................................................................................................18
3.3.  Connections BAPPUevo (from version 4000/11)........................................18
Connectors VOCOOsx as well as ANEMOMETERevo...................19
3.4.  Help  ar.......................................................................................................19
3.5.  Background Colour.....................................................................................19
4.            Main menu                                                                                                                   19   
4.1.  BAPPU-measurement.................................................................................20
4.2.  Recording....................................................................................................20
4.3.  Settings.......................................................................................................20
5.            Measurement preparation                                                                                            21   
5.1.  Edit measurement series profile (Profile)....................................................21
5.2.  Editing the workplace..................................................................................21
Enter workplace name.....................................................................22
Assign workplace type.....................................................................22
Assign workplace profile..................................................................22
Deleting measurement data.............................................................22
6.            Measurement sequen                                                                                                  23   
6.1.  Perform measurement................................................................................23
Evaluation........................................................................................23
Saving measured values.................................................................23
Hold / freeze readings......................................................................23
Finis ing or cancelling a measuring range......................................24
6.2.  Measurement result overview.....................................................................24
6.3.  Detailed view...............................................................................................25
6.4.  Repeat measurement..................................................................................25
7.            (Long-term) recording)                                                                                                 25   
Selecting t e measuring range........................................................26
7.1.  Set interval..................................................................................................26
7.2.  Memory type...............................................................................................26
7.3.  Starting and stopping the recording............................................................26
7.4.  Key oard lock.............................................................................................27
7.5.  ta le-mounting pin.......................................................................................27
8.            Settings                                                                                                                        27   
8.1.  Language....................................................................................................27
8.2.  Display/Energy............................................................................................28
8.3.  Measurement settings (measurement).......................................................28
Humidity compensation (rf-compensation)......................................28
Time-weig ting (time weig ting noise)............................................28
Area (area noise).............................................................................28
C-peak measurement (C-peak measurement)................................29
Clot ing insulation value (PMV CLO)..............................................29
PMV–Calculation (PMV air velocity)................................................29
8.4.  Time............................................................................................................29
8.5.  Firmware update.........................................................................................30
User Init...........................................................................................30
page 2 comp   a  c  t   manual    status 03/2023

Multi-measuring device for workplace analysis BAPPUevo
8.6.  Measurement profile (Profile).........................................................................30
9.            BAPPU standard software                                                                                               31   
9.1.  License general terms and conditions............................................................31
9.2.  Installation.......................................................................................................31
9.3.  Starting the programme and connecting BAPPU...........................................32
9.4.  Settings...........................................................................................................32
9.5.  Online..............................................................................................................32
9.6.  Extra................................................................................................................32
9.7.  Defining the type (defining the type of work place).........................................32
9.8.  Worksplace names and type definition (data retrieval)...................................35
9.9.  Reading and evaluating measurement values................................................35
9.10.  User-defined display.......................................................................................36
9.11.  Measurement profile (Profile).........................................................................36
10.          BAPPU-time software                                                                                                      37   
10.1.  License general terms and conditions............................................................37
10.2.  Installation.......................................................................................................38
10.3.  Starting the programme..................................................................................38
10.4.  Computer test.................................................................................................38
10.5.  Working with BAPPU-time..............................................................................38
10.6.  Operating and reading the internal data counter............................................39
Data Logger port.................................................................................39
Configuring t e data logger.................................................................39
Reading t e BAPPU-evo data counter................................................40
10.7.  Opening and displaying recorded data...........................................................41
10.8.  Display options for the graphs........................................................................43
Specific selection.................................................................................43
Zoom in/zoom out................................................................................44
Ruler....................................................................................................44
Measurement value table....................................................................44
10.9.  Selecting a recording......................................................................................45
10.10.  Mean value calculator.....................................................................................45
10.11.  Recording with the PC....................................................................................45
10.12.  Starting a recording........................................................................................46
Online-Monitor.....................................................................................47
Grap ic display....................................................................................47
T e end of t e recording.....................................................................48
10.13.  General...........................................................................................................48
Exporting files......................................................................................48
Printing................................................................................................49
Rig t mouse button.............................................................................49
11.          Warranty and Guarantee                                                                                                 49   
12.          Operator Responsi ility                                                                                                   49   
Instruction by t e operator...................................................................50
page 3 comp   a  c  t   manual   
  status 03/2023

BAPPUevo Multi-measuring device for workplace analysis

1. BAPPUevo

The product is a multi-meter for orienting measurement of environmental

characteristics at workplaces. The following measurands can e measured: Air

temperature, relative humidity, noise level class 2 with C-peak up to 137 dB,

illuminance class C, flicker frequency, luminance, luminance ratio, and optionally

CO2 value, TVOC, CO value, IRevo surface temperature, Glo e temperature, air

velocity, and fine dust PM1, PM2.5, PM10.

Developed and manufactured y:

ELK GmbH – Ingenieurbüro für Elektronik

Glad acher Str. 232 • D-47805 Krefeld

fon. +49 2151-788 86-0 • fax. +49 2151-788 86-02

www.elk.de • [email protected]

The contents of this manual are su ject to unannounced changes that reflect

technical progress.

Technical questions please send to: support@ appu.de

The instructions for use contain the most important information for operating the

product safely. The instructions for use must always e kept close at hand and

always accessi le near the product.

This instruction manual meets the requirements of the Product Safety law. (ProdSG)

When operating the product, follow the instructions for use and the product

specifications.

The contents of the important instructions for use must e read, understood and

followed in all respects y anyone responsi le for the assem ly and operation of the

product. This is especially for the safety instructions in Chapter 2. Following the

safety instructions and instructions will help to prevent accidents, malfunctions, faults

and property damage.

page 4 comp a c t manual status 03/2023

Multi-measuring device for workplace analysis BAPPUevo

1.1. ymbols

The following sym ols are used in this operating manual:

T is note indicates t e risk of injury and / or deat as well as

ealt azard, if certain rules of conduct are disregarded.

Tipp:

Tipp: Important notes and information for installation, operation and

maintenance.

Please note and read t e instructions for use.

1.2. ecurity alert

During assem ly and operation, the following safety instructions must e o served:

Use personal protective equipment (PPE)

When using the product, it may e necessary to wear safety shoes.

When using the product, wearing protective clothing may e required.

When using the product, it may e necessary to wear protective gloves.

When using the product, wearing an industrial helmet may e required.

When operating the product for noise measurement, it may e

necessary to wear ear protection.

While charging, do not leave the device unattended.

page 5 comp a c t manual

status 03/2023

BAPPUevo Multi-measuring device for workplace analysis

1.3. General information

Risk of burns: T e product is subjected to an operating

temperature of up to 50 ° C. T ere is a risk of burns on

ousing parts.

Avoid installation errors: T e product may only be

installed by qualified personnel of t e operator.

Assembly errors can lead to malfunctions!

1.4. Qualification of the operating personnel

Work with and on the product may only e carried out y instructed persons of the

operator with the requisite knowledge and experience.

1.5. Observe accident prevention regulations

The relevant accident prevention regulations as well as the other generally accepted

safety rules must e o served.

1.6. Intended use

The product may only e used to measure the a ove-mentioned measurands at

workplaces in accordance with Ar StättV (see place of use) within the scope of the

am ient conditions and permissi le measuring ranges listed elow.

The various sensors may only e used for intended measurements or for

measurements within the cali rated or permissi le measuring range. For

measurements outside the cali rated range, readings may e outside the allowa le

tolerance; measuring unintended readings or taking readings outside the accepta le

range may damage the sensors or even the entire product.

The product can e used at workplaces. Workplaces are workspaces or other places

in uildings on the premises of an esta lishment, places in the open air on the

premises of an esta lishment, places on construction sites, if they are intended for

use for workplaces.

A workplace includes, in particular, places on the premises of an esta lishment or

construction site to which workers have access in the course of their work, traffic

routes, escape routes, emergency exits, warehouses, machines and ancillary rooms,

sanitary facilities, canteens, reaks and preparedness rooms, first aid rooms,

accommodation as well Facilities for the operation of the workplace, fire-

extinguishing equipment, utilities, lighting, ventilation and air conditioning, signaling,

power distri ution systems, doors and gates, moving walks, escalators, loading

ramps and ladders.

page 6 comp a c t manual status 03/2023

Multi-measuring device for workplace analysis BAPPUevo

Any use eyond its intended use is deemed to e contrary to the intended purpose.

The manufacturer is not lia le for resulting damages.

Proper use also includes o serving and following all instructions in this documentation.

1.7. Technical changes

The manufacturer assumes no lia ility for technical changes y the operator or y

another manufacturer.

If technical modifications are made to the multimeter y the operator or y another

manufacturer, this must e considered anew from a safety point of view.

1.8. Initial assembly

The initial assem ly and all related work will e carried out y the manufacturer.

1.9. Delivery contents

BAPPUevo with internal data logger for long-term recording, carrying case,

rechargea le atteries (4 x Mignon (HR6, NiMh)), power supply, USB ca le, hand

strap, mini tripod, "Stupka" stand and operating instructions.

1.10. Optinal ensor

ANEMOMETERevo, GLOBETHERMOMETERevo, VOCOOsx, IRevo

1.11. Optional accessories

A calibration unit for checking the accuracy of and for adjusting the noise level

measurements on site.

•An additional battery pack

•A high-quality charger for charging external atteries. This unit helps you get

the maximum capacity from the attery. It can even e used for charging an

additional attery pack.

page 7 comp a c t manual

status 03/2023

BAPPUevo Multi-measuring device for workplace analysis

1.12. Disposal

Please dispose of all packaging and o solete devices in

the correct manner. In the interest of the environment, the

device must not e thrown away as normal household

waste. You should arrange for the proper disposal of the

device.

Your local government will e a le to provide you with the

respective collection points and their opening hours.

1.13. upport

ELK Gm H | Glad acher Straße 232 | D-47805 Krefeld

Fon: +49 (0) 2151 392829 | Fax: +49 (0) 2151 391846 I

info@ appu.de | www. appu.de

1.14. Calibrating BAPPU-evo

Detectors and sensors are prone to drifting and change. In order to guarantee high-

quality results with BAPPU-evo, we recommend that a factory cali ration of the unit

should e carried out every twelve months.

BAPPU-evo displays a corresponding message in the main menu one month efore

the end of the cali ration interval. This can e deactivated under "Settings / Display".

However, it is then possi le that the results of the measurements are outside the

tolerance range.

1.15. Technical data and measuring range

Permissible operating conditions

Temperature: range from 0 °C to +50 °C I Relative humidity: range from 0 to 95%

(non-condensing) I The optional sensors might have deviating operating conditions:

With the optional CO sensor (only in BAPPU-VOCOO to serial num er xxx/04):

temperature: range from 0 °C to +50 °C (this also applies for storage).

Caution: Storage below 0 ° C can permanently damage t e

CO sensor.

With option particular matter (in BAPPU-VOCOO-sx): temperature: from 0 °C to +40

°C, humidity: from 10 %...70 % rF (this also applies to storage).

page 8 comp a c t manual status 03/2023

Andere Handbücher für BAPPU-evo

Inhaltsverzeichnis

Andere Elk Messgerät Handbücher

Elk

Elk BAPPU-evo Montageanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung