Elmo PTC-200C Bedienungsanleitung
Please read this instruction manual carefully before using this PTC-200C
and keep it for future reference.
PAN • TILT • ZOOM COLOR CAMERA
PTC-200C
INSTRUCTION MANUAL
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus outdoors.
6. Do not use this apparatus near water.
7. Clean only with dry cloth.
8. Do not install near heat sources such as radiators, heat registers,
stoves or other apparatus (including amplifiers) that produce heat.
9. Do not touch this apparatus during lightning storms.
10.Unplug when unused for long periods of time.
11.Refer all servicing to qualified personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord
or plug is damaged, liquid has been spilled or objects have been fallen
onto the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
- 1 -
IMPORTANT SAFETY INSTRUCTIONS
- 2 -
CAUTION
• Do not use any power supply other
than specified.
WARNING
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE.
* The CAUTION label is attached on
the base of product.
INFORMATION
This equipment has been tested
and found to comply with the
limits for Class A digital device,
pursuant to Part 15 of the FCC
Rules. These limits are designed
to provide reasonable protection
against harmful interference
when the equipment is operated
in a commercial environment.
This equipment generates, use,
and can radiate radio frequency
energy and, if not installed and
used in accordance with the
instruction manual, may cause
harmful interference to radio
communications. Operation of
this equipment in a residential
area is likely to cause harmful
interference in which case the
user will be required to correct
the interference at his own
expense.
USER-INSTALLER
CAUTION: Your authority to
operate this FCC verified
equipment could be voided if you
make changes or modifications
not expressly approved by the
party responsible for compliance
to Part of the FCC Rules.
CAUTION
CAUTION : TO REDUCE THE RISK OF
ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
RISK OF ELECTRIC
SHOCK DO NOT OPEN
The lightning flash with arrowhead
symbol, within an equilateral
triangle, is intended to alert the
user to the presence of
uninsulated "dangerous voltage"
within the product's enclosure that
may be of sufficient magnitude to
constitute a risk of electric shock
to persons.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and
maintenance (servicing)
instructions in the literature
accompanying the appliance.
Be sure to use the provided AC adapter.
Do not leave the Camera under direct sunlight or by heater, or the
Camera may be discolored, or damaged.
Do not place the Camera in any humid, dusty, windy or vibrating
location. Use the Camera in the following environmental condition:
Temperature: 0 °C ~ 40 °C (32 ° ~ 104 °F)
Humidity: 30% ~ 85% (No condensation)
Use a soft, dry cloth for cleaning. Do not use any volatile solvent, such
as thinner or benzine.
Do not directly point the camera lens into the sun, or the camera may be
damaged.
Caring for the batteries:
• If the Camera is not used for long time, remove the batteries from the
remote controller.
• Do not use rechargeable Ni-Cd batteries.
• Do not use new and old batteries, or batteries of different type
together.
• Do not try to recharge or short-circuit the batteries.
Do not operate the PAN/TILT motion continuously for a long time, or the
life of the Camera will be shortened.
- 3 -
HANDLING PRECAUTIONS
- 4 -
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS .........................................1
HANDLING PRECAUTIONS............................................................3
1. PART NAMES AND FUNCTIONS....................................................5
2. WIRELESS REMOTE CONTROLLER.............................................7
3. SETTING UP....................................................................................9
4. OPERATION PROCEDURES........................................................14
[1] Power supply to the Camera.....................................................14
[2] Turning ON/OFF of the Camera power.....................................14
[3] Operating PAN/TILT..................................................................15
[4] Lens operation...........................................................................16
[5] BLC (Back Light Control)...........................................................17
[6] Preset operation........................................................................17
5. THE ID NUMBER SETTING...........................................................18
6. OSD (On-Screen Display) ..............................................................19
7. ALARM IN/OUT TERMINALS ........................................................22
[1] Alarm input ................................................................................22
[2] Alarm output..............................................................................22
8. ALL CLEAR SWITCH.....................................................................23
9. RS-485 ...........................................................................................24
10. TERMINATING RESISTANCE AND ID ADDRESS SETTINGS ....25
[1] Setting the terminating resistance.............................................25
[2] Setting the ID address...............................................................25
11. TROUBLESHOOTING HINTS........................................................28
12. SPECIFICATIONS..........................................................................29
13 SUPPLIED ACCESSORIES...........................................................30
Overall View
- 5 -
1. PART NAMES AND FUNCTIONS
CAMERAHEAD
INFRAREDSENSOR
LED
BASE
LENS
TERMINALBLOCK
COMPOSITE-VIDEOOUT
(RCApinjack)
DCIN
DIPSwitch(10) DIPSwitch(4)
RS-485INTERMINAL
ALARMINTERMINAL
RS-485OUTTERMINAL
ALARMOUTTERMINA
L
INFRAREDSENSOR
This camera is designed to mount on ceiling panels only.
Wireless Remote Controller
- 6 -
POWER
1
OPEN
2
CLOSE
3
AUTO
4
NEAR
5
FAR
6
AUTO
7
TELE
8
WIDE
9
MENU
12 CURSOR/PAN-TILT
13
Directions
10
HOME
11
ID
17
RESET
15
BACK LIGHT
14
PRESET
16
NUMBER (1 6)
18
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
Function
To turn ON/OFF the Camera power.
To open the iris manually.
To close the iris manually.
To iris automatically.
To move the focus near.
To move the focus far.
To focus automatically.
To zoom in.
To zoom out.
To change the Camera head direction.
To operate the OSD*1 cursor.
To turn the Camera head to the front.
To operate the OSD*1 cursor.
To turn ON/OFF the OSD*1 display.
To switch the operation mode between the menu
operation and the PAN-TILT operation.
Back light control.
To readjust the Camera head and LENS position.
To register the preset.
To operate multiple Cameras individually.
To set the preset position and the ID No.
Reference Page
P.19
P.16
P.16
P.16
P.16
P.16
P.16
P.16
P.16
P.15
P.19, P.20, P.21
P.15
P.19, P.20, P.21
P.18,P.19,P.20,P.21
P.19
P.17, P.20
P.15
P.17
P.14, P.18
P.17, P.18
Button Name
POWER
OPEN
CLOSE
AUTO
NEAR
FAR
AUTO
TELE
WIDE
Direction
()
HOME
MENU
CURSOR/
PAN-TILT
BACK LIGHT
RESET
PRESET
ID
NUMBER
(1~6)
No.
*1 OSD (On-Screen Display)
Point the infrared emitting window of the wireless remote controller at the infrared sensor
of the Camera, located at the front, and the rear panel, and select the desired function.
Receivable range
- 7 -
2. WIRELESS REMOTE CONTROLLER
Note: The infrared sensors may receive the infrared rays only within a narrower
receivable range or may not receive them at all depending on the ambient
environment, such as being placed under the sunlight or near an inverter
fluorescent lamp. In such case, relocate the installation place of the
receiving side or block off the sunlight.
- 8 -
Preparation
Remove the battery case cover by pressing downward on the [ ] mark part in the
direction as indicated by the arrow.
Install 2 pcs. of batteries (type R03,AAA) into the case in the direction as indicated
there.
Note: Install the batteries with the proper to and to polarity.
Note: For dry cells, be sure to use the size AAA.
Note: Change the batteries at least once a year or when even nesessary.
Note: The batteries supplied with the Camera are only for use in initially
confirming the operation of the Camera.
It is not guaranteed that these batteries will work effectively for the
indicated period.
When multiple Cameras are operated through the wireless remote
controller
Refer to "5. THE ID NUMBER SETTING" on P. 18.
- 9 -
3. SETTING UP
Note: When carrying the Camera, be sure to hold the base.
Note: Do not turn the Camera head in the PAN-TILT direction by hand, or
the Camera head may be broken.
HEXAGONHEADBOLTM5x40,4PCS
MAINUNIT
FIXINGPLATE
SCREWM3x5(attached),4PCS
•Put 4 Hexagon Head Bolts M5x40 (supplied)
through the Fixing Plate, and screw the Fixing
Plate to the Main Unit with 4 Screws M3x5
(supplied).
Note: For fastening the Fixing Plate, be
sure to use the 4 Phillips-head
Screw M3x5 (supplied). Be careful
that using any screws other than
the supplied may damage the
inside of the Main Unit. (Do not use
longer screws)
(1) Mounting the Fixing Plate
[1] Installation
Andere Handbücher für PTC-200C
2
Inhaltsverzeichnis
Andere Elmo Sicherheitskamera Handbücher
Elmo
Elmo ESD-380 Bedienungsanleitung
Elmo
Elmo TD4114 IP II Bedienungsanleitung
Elmo
Elmo One-Piece Color Video Micro Camera MN30 Bedienungsanleitung
Elmo
Elmo SN2230IP II Bedienungsanleitung
Elmo
Elmo CCD Color Dome Camera TSN400A Bedienungsanleitung
Elmo
Elmo TSN280D Bedienungsanleitung
Elmo
Elmo X Line TND4003X Bedienungsanleitung
Elmo
Elmo PTC-100S Bedienungsanleitung
Elmo
Elmo ESD-370 Bedienungsanleitung
Elmo
Elmo PTC-400C Bedienungsanleitung
Elmo
Elmo Dome Camera TND4104X Bedienungsanleitung
Elmo
Elmo TSE270X Bedienungsanleitung
Elmo
Elmo PTC-100S Bedienungsanleitung
Elmo
Elmo BUTP200 Bedienungsanleitung
Elmo
Elmo HC7501 Bedienungsanleitung
Elmo
Elmo TD4114IP II Bedienungsanleitung
Elmo
Elmo PTC-400C Bedienungsanleitung
Elmo
Elmo TSN410D Bedienungsanleitung
Elmo
Elmo GIR-S7322WS Bedienungsanleitung
Elmo
Elmo Vandal Resistant Dome Camera TND4204VX Bedienungsanleitung
