Elo Touch Solutions 2D Barcode Scanner Bedienungsanleitung

USER MANUAL

Elo Touch Solutions

2D Barcode Scanner Peripheral

User Manual –2D Barcode Scanner

UM600149 Rev B, page 2 of 22

No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or

by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior written permission of Elo Touch Solutions, Inc.

Disclaimer

The information in this document is subject to change without notice. Elo Touch Solutions, Inc. and its Affiliates (collectively “Elo”) makes no representations or warranties

with respect to the contents herein, and specifically disclaims any implied warranties of merchantability or fitness for a particular purpose. Elo reserves the right to

Revise this publication and to make changes from time to time in the content hereof without obligation of Elo to notify any person of such revisions or changes.

Trademark Acknowledgments

AccuTouch, CarrollTouch, Elo, Elo (logo), Elo Touch, Elo Touch Solutions, Elo TouchSystems, IntelliTouch, iTouch, SecureTouch,

TouchToolsand VuPoint are trademarks of Elo and its Affiliates. Windows is a trademark of Microsoft Corporation.

User Manual –2D Barcode Scanner

UM600149 Rev B, page 3 of 22

Table of Contents

Section 1: Introduction ............................................................................................................................................................................................................................... 4

Section 2: Installation................................................................................................................................................................................................................................. 5

Section 3: Configuration............................................................................................................................................................................................................................. 8

Section 4: Technical Support................................................................................................................................................................................................................... 15

Section 5: Safety...................................................................................................................................................................................................................................... 16

Section 6: Regulatory Information............................................................................................................................................................................................................ 17

Section 7: Warranty Information............................................................................................................................................................................................................... 21

User Manual –2D Barcode Scanner

UM600149 Rev B, page 4 of 22

Section 1: Introduction

Product Description

The Elo 2D Barcode reader kit is an optional attachment for Elo monitors, Android All-in-one computers, and

Windows All-in-one computers. The device is USB based and capable of reading most common types of barcodes.

The reader is configurable to work with most applications.

Precautions

Follow all warnings, precautions and maintenance as recommended in this user manual to maximize the life of your

unit and prevent risks to user safety. See Section 6 for more information on safety.

This manual contains information that is important for the proper setup of the scanner. Before setting up and

powering on your new scanner, read through this manual, especially the Installation, configuration, and Operation

chapters.

User Manual –2D Barcode Scanner

UM600149 Rev B, page 5 of 22

Section 2: Installation

Unpacking the 2D Barcode Scanner

Verify that the box contains:

•

2D Barcode scanner attachment

•

Quick Install Guide

•

2 mounting screws

•

2 screw covers

User Manual –2D Barcode Scanner

UM600149 Rev B, page 6 of 22

Attaching the Barcode Reader

User Manual –2D Barcode Scanner

UM600149 Rev B, page 7 of 22

Installing the Touch Technology Software Drivers

For use with Windows Systems:

Visit the N3680 product page on the Honeywell Scanning and Mobility website to download and install

- EZConfig for Scanning (Version 4.5.20) and

- Honeywell Scanning and Mobility USB Serial Driver

For use with Android systems:

The Elo Barcode Scanner is ready to use in its default mode. The scanner default mode is:

- USB virtual com port interface

- Presentation mode (always on)

- Beep on scan

- Set up to read most common codes.

User Manual –2D Barcode Scanner

UM600149 Rev B, page 8 of 22

Section 3: Configuration

Out-of-box Settings

Out of the box the default settings of the barcode reader will be:

- USB VCP (Virtual COM Port)

- Presentation Mode

oIllumination always on

oRed aimer will turn off between reads

- Most common barcodes enabled

- Beep on successful scan

If you are okay with the default settings you may begin using the 2D scanner. If you prefer different settings, this section will cover additional configurations that can be

tailored to your application. Only the most common settings will be covered in this manual. For additional settings, please download the N3680 User Guide from the

Honeywell website

User Manual –2D Barcode Scanner

UM600149 Rev B, page 9 of 22

Reader Interface

VCP Mode (Virtual COM Port)

This is the default setting for the scanner out of the box. It is required to change to this interface when using the Honeywell EZConfig software for Windows.

USB Keyboard Mode

USB HID Mode

User Manual –2D Barcode Scanner

UM600149 Rev B, page 10 of 22

Illumination Settings

This is the default setting for the scanner. The white illumination light on at all times.

Scanning this barcode will disable the while illumination light when the scanner is not in use.

Trigger Mode Settings

Out of the box the default of the scanner will be presentation mode (always on). The reader will be scanning for barcodes at all times.

Manual Trigger mode:

Scanning the above barcode will enable manual trigger mode. When in this mode, the scanner will need to be activated manually (by software or hardware button)

between each scan.

Presentation Mode (default setting)