Elo Touch Solutions SE2707 Bedienungsanleitung
USER MANUAL
Elo Touch Solutions
Elo Kit, 2D Barcode Scanner, Edge Connect
User Manual –2D Barcode Scanner (Zebra)
UM600xxx Draft, page 2 of 40
Copyright © 2017 Elo Touch Solutions, Inc. All Rights Reserved.
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or
by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior written permission of Elo Touch Solutions, Inc.
Disclaimer
The information in this document is subject to change without notice. Elo Touch Solutions, Inc. and its Affiliates (collectively “Elo”) makes no representations or warranties
with respect to the contents herein, and specifically disclaims any implied warranties of merchantability or fitness for a particular purpose. Elo reserves the right to
Revise this publication and to make changes from time to time in the content hereof without obligation of Elo to notify any person of such revisions or changes.
Trademark Acknowledgments
AccuTouch, CarrollTouch, Elo, Elo (logo), Elo Touch, Elo Touch Solutions, Elo TouchSystems, IntelliTouch, iTouch, SecureTouch,
TouchTools and VuPoint are trademarks of Elo and its Affiliates. Windows is a trademark of Microsoft Corporation.
User Manual –2D Barcode Scanner (Zebra)
UM600xxx Draft, page 3 of 40
Table of Contents
Contents'
Section 1: Introduction ....................................................................................................................................................................................................... 5
Product Description ....................................................................................................................................................................................... 5
Precautions ................................................................................................................................................................................................... 5
Features ........................................................................................................................................................................................................ 6
Supported Symbolgies .................................................................................................................................................................................. 6
Imager Aiming Element specifications .......................................................................................................................................................... 7
Trigger Level Mode Working Decode Ranges .............................................................................................................................................. 8
Presentation Mode Working Decode Ranges ............................................................................................................................................... 8
Manual Trigger Button ................................................................................................................................................................................... 8
Section 2 Unpacking .......................................................................................................................................................................................................... 9
Unpacking the 2D Barcode Scanner ............................................................................................................................................................. 9
Section 3: Installation ...................................................................................................................................................................................................... 10
Attaching the 2D Barcode Reader .............................................................................................................................................................. 10
Installing the Software Drivers .................................................................................................................................................................... 13
Section 4: Default settings ............................................................................................................................................................................................... 14
Out-of-box Settings ..................................................................................................................................................................................... 14
User Preferences/ Parameter Defaults ....................................................................................................................................................... 14
USB Host Parameter Defaults .................................................................................................................................................................... 15
Image Capture Preferences Default ............................................................................................................................................................ 16
Section 5: Configuration ................................................................................................................................................................................................. 17
Send Versions ............................................................................................................................................................................................. 17
Report Version ............................................................................................................................................................................................ 17
Report Decoder Manufacturing Information ................................................................................................................................................ 17
User Manual –2D Barcode Scanner (Zebra)
UM600xxx Draft, page 4 of 40
Report Scan Engine Manufacturing Information ......................................................................................................................................... 17
Setting to Default Parameters ..................................................................................................................................................................... 18
USB Interface Parameters: ......................................................................................................................................................................... 19
Reader Interface ............................................................................................................................................................................ 19
Symbol Native API (SNAPI) Status Handshaking .......................................................................................................................... 20
USB Country Keyboard Types - Country Codes ............................................................................................................................ 21
User Preferences Parameter: ..................................................................................................................................................................... 24
Illumination Brightness ................................................................................................................................................................... 26
Aim Brightness ............................................................................................................................................................................... 28
USB Keystroke Delay .................................................................................................................................................................... 29
Beeper Volume .............................................................................................................................................................................. 30
Beeper Tone .................................................................................................................................................................................. 31
Beeper Duration ............................................................................................................................................................................. 32
Mobile Phone/Display Mode .......................................................................................................................................................... 33
Section 6: Technical Support ........................................................................................................................................................................................... 34
Technical Assistance .................................................................................................................................................................................. 34
Section 7: Safety & Regulatory Information ..................................................................................................................................................................... 35
Electrical Safety Information ....................................................................................................................................................................... 35
Emissions and Immunity Information .......................................................................................................................................................... 35
Agency Certifications .................................................................................................................................................................................. 37
Waste Electrical & Electronic Equipment Directive (WEEE) ....................................................................................................................... 37
Power Specifications ................................................................................................................................................................................... 38
Section 8: Warranty Information ...................................................................................................................................................................................... 21
User Manual –2D Barcode Scanner (Zebra)
UM600xxx Draft, page 5 of 40
Section 1: Introduction
Product Description
The Elo 2D Barcode reader kit is an optional attachment for Elo monitors, Android All-in-one computers, and Windows
All-in-one computers. The device is USB based and capable of reading most common types of barcodes. The reader
is configurable to work with most applications.
• The SE2707 contains the SE4710 engine and decoder with USB interface.
• The SE4720 is with companion with PL5000 decoder with USB interface.
Precautions
Follow all warnings, precautions and maintenance as recommended in this user manual to maximize the life of your
unit and prevent risks to user safety. See Section 7 for more information on safety.
This manual contains information that is important for the proper setup of the scanner. Before setting up and powering
on your new scanner, read through this manual, especially the Installation, configuration, and Operation chapters.
On this user manual only the most common parameters settings will be covered. For additional parameter and
symbologies settings, please download the User Guide (SE2707 & PL5000 Decoder for SE4720) from the
Zebra website.
User Manual –2D Barcode Scanner (Zebra)
UM600xxx Draft, page 6 of 40
Features
Sensor
CMOS
Resolution
• SE2707 - 600 x 400
• SE4720 - 1280 x 800
Illumination and Aimer
White LED illumination / Red LED aimer
Typical frame rate
60 frames per second
Motion Tolerance
Up to 600 cm/s (236in/s) maximum
400 cm/s (157in/s) typical
Field of View
Horizontal: 43.8°, Vertical: 31°
Scan Angles
Tilt: 360°, Pitch: ± 60°, Skew: ± 60°
Symbol Contrast
20% minimum print contrast ratio
Interface
Micro USB
Beeper
Beep at every successful scan.
OCR Programming
• SE2707 Not supported
• SE4720 with PL50000 Supported
Supported Symbolgies
For symbologies settings, please download the User Guide (SE2707 & PL5000 Decoder for SE4720) from the Zebra
website.
Linear
Codabar, Code 11, Code 128, Code 2 of 5, Code 39, Code 93
and 93i, EAN/JAN-13, EAN/JAN 8, IATA Code 2 of 5, Interleaved
2 of 5, Matrix 2 of 5, MSI, GS1 Databar, UPC-A, UPC E, UPC-
A/EAN-13 with Extended Coupon Code, Coupon GS1 Code
32(PARAF), EAN-UCC Emulation, GS1 Data Bar
2D Stacked
Codablock A, Codablock F, PDF417, MicroPDF417
2D Matrix
Aztec Code, Data Matrix, MaxiCode, QR Code, Chinese Sensible
(Han Xin), Grid Matrix, Dot Code
Postal:
AustralianPost, British Post, Canadian Post, China Post,
Japanese Post, Korea Post, Netherlands Post, Planet Code,
Postnet
User Manual –2D Barcode Scanner (Zebra)
UM600xxx Draft, page 7 of 40
Imager Aiming Element specifications
Skew, Roll, and Pitch
Measured on a 20 mil Code 39 symbol at distance of 5 inches. Tolerance for skew and pitch is reduced at
extreme ends of the working range.
5 in. (127mm)
5 in. (127mm)
5 in. (127mm)
User Manual –2D Barcode Scanner (Zebra)
UM600xxx Draft, page 8 of 40
Trigger Level Mode Working Decode Ranges
Note: Photographic quality bar code at 15° tilt pitch angle under 30fcd ambient illumination.
( * ) Limited by width of bar code in field of view.
Bar Code Type
Near Distance
Typical
Far Distance
Typical
5 mil Code 39
2.0 in / 5.1 cm
8.0 in / 20.3 cm
5 mil Code 128
2.5 in / 6.3 cm
5.0 in / 12.7 cm
6.6 mil PDF417
2.5 in / 6.3 cm
6.3 in / 16.0 cm
10 mil PDF417
1.8 in / 4.5 cm*
9.0 in / 22.8 cm
13 mil 100%
2.0 in / 5.0 cm*
12.5 in / 31.7 cm
20.0mil Code
2.0 in / 5.0 cm*
19.5 in / 49.5 cm
20 mil Data Matrix
1.5 in / 3.8 cm
13.5 in / 34.3 cm
20 mil QR Code
1.5 in / 3.8 cm
11.0 in / 27.9 cm
Presentation Mode Working Decode Ranges
(Swipe Speed: 15 in/sec)
Bar Code Type
Near Distance
Typical
Far Distance
Typical
100% UPCA
80% MRD
5.0 in / 12.7 cm
6.4 in / 16.2 cm
Manual Trigger Button
This button can be access with a small Pin.
User Manual –2D Barcode Scanner (Zebra)
UM600xxx Draft, page 9 of 40
Section 2 Unpacking
Unpacking the 2D Barcode Scanner
Verify that the box contains:
• 2D Barcode scanner
•
2 mounting screws
•
2 screw covers
•
Quick Install Guide
Remove all protective material from the device.
Inspect the device for damage.
Report immediately if 2D Barcode scanner is damage and with missing items as listed above.
User Manual –2D Barcode Scanner (Zebra)
UM600xxx Draft, page 10 of 40
Section 3: Installation
Attaching the 2D Barcode Reader
Note: The peripheral image below may appear different.
Step 1: Select the location to mount the 2D barcode reader. Some systems have more than one mounting option.
Step 2: Remove the selected peripheral cover from the touch monitor or computer.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Elo Touch Solutions Barcode-Lesegerät Handbücher
Beliebte Barcode-Lesegerät Handbücher anderer Marken
POSMicro
POSMicro Datalogic PowerScan D7100 Bedienungsanleitung
Marson
Marson MT780 Kurzanleitung zur Einrichtung
NCR
NCR RealPOS Bedienungsanleitung
Motorola
Motorola SE3300 Kurzanleitung zur Einrichtung
Element
Element P130BT Bedienungsanleitung
Motorola
Motorola Symbol LS3008 Installations- und Betriebshandbuch
