Emax Buzz Bedienungsanleitung

Thanks for purchasing the Buzz. Designed in California, assembled in China.

Buzz

emax-usa.com

Disclaimer

Please read the disclaimer carefully before using this product. By using this product,

you hereby agree to this disclaimer and signify that you have read them carefully and

completely. This product is not suitable for people under the age of 18. Adult

supervision is highly recommended for kids under the age of 18.

The Buzz features open-source flight controller and Electronic Speed Controllers to

meet the FPV enthusiasts' need to upgrade their quad.

Please read the instruction manual and warnings carefully. Before every flight, make

sure the battery is fully charged and power connections are secure. DO NOT fly

around crowds, children, animals or objects. EMAX ACCEPTS NO LIABILITY FOR

DAMAGE(S) OR INJURIES INCURRED DIRECTLY OR INDIRECTLY FROM THE

USE OF THIS PRODUCT.

Precautions

Please follow the instructions to assemble and to operate this product in a proper

way.

Pilots do not use this product if you have physical or mental illness, dizziness,

fatigued, or use while under the influence of alcohol or drugs.

Please fly in a safe area away from people

Do not modify or use other parts and accessories not approved for the use of EMAX.

Do not use this product in harsh environments (such as winds, rain, lightning, snow,

etc.).

Do not use this product in a strong electromagnetic environment.

Support

Please visit emax-usa.com or emaxmodel.com for any updates or support needs.

Buzz

emax-usa.com

Table of Contents

Disclaimer.................................................................................................................1

Precautions............................................................................................................... 1

Support .....................................................................................................................1

Product specification................................................................................................. 1

Buzz................................................................................................................... 1

Parameter.......................................................................................................... 1

Product list............................................................................................................. 1

Buzz Structure.......................................................................................................1

Buzz Assembly.......................................................................................................... 2

Propeller Direction and Mounting........................................................................... 2

Propeller Type.................................................................................................... 2

Antenna Mount......................................................................................................2

Buzz VTX Operation..................................................................................................3

VTX Channel Settings with the Button................................................................... 3

Button Menu Diagram............................................................................................ 4

CE and FCC unlicensed user chart........................................................................ 4

Unlocked FCC HAM licensed user chart...............................................................4

Changing VTX setting via Betaflight OSD..............................................................5

Buzz ESC.................................................................................................................. 6

Buzz Flight Controller................................................................................................ 7

........................................................................................................................... 7

Stock Flight Controller Settings..............................................................................7

Current Sensor Jumper .........................................................................................8

Adjusting Software Settings (Betaflight Configurator).............................................8

Reprogramming Buzz Flight Controller............................................................... 8

........................................................................................................................... 8

Set the Correct Settings..................................................................................... 8

VTX Power Cut Off Switch..................................................................................... 9

Operation:.......................................................................................................... 9

Buzz Receiver...........................................................................................................9

Binding Procedure............................................................................................ 10

Buzz

emax-usa.com

Product specification

Product list

1. Buzz × 1

2. Avan Flow 5x4.3x3 (3x CW, 3x CCW)

3. Avan Scimitar 5x2.6x3 (3x CW, 3x CCW)

4. Extra Parts Package × 1

5. Instruction manual × 1

6. Pagoda Right Hand Antenna × 1

7. HD Camera Strap x 1

Buzz Structure

Buzz

Parameter

Diagonal wheelbase (without paddles)

245mm

Aircraft weight (without battery)

358g

Motor

FS 2306 2400kv

Propeller

Avan Flow 5x4.3x3 & Avan Scimitar 5x2.6x3

Main Flight Controller

F4（OmnibusF4 firmware）

4 in one 3s-6s 45A 32 bit ESC

FrSky XM+ receiver 16 CH Diversity

Camera

Caddx Micro S1 CCD

Transmitter

0-25-200mW Adjustable frequency 37CH With

Smart Audio

Battery

Recommended 1300-1800 mAh 4S (Not Included)

Buzz

emax-usa.com

Buzz Assembly

The Buzz comes nearly completely assembled out of the box, only required to install

the propellers and FPV antenna.

Propeller Direction and Mounting

There are 2 spinning directions for the propellers, Clockwise (CW) and Counter-

Clockwise (CCW). When Buying a set of propellers, 2 CW and 2 CCW will be given.

The blunt leading edge indicates the direction the propeller is supposed to rotate as

compared to the sharp trailing edge. When mounting propellers please make sure

the correct orientation shown in the diagram below.

Caution: Failure to mount the propellers in the correct orientation will cause Buzz to

not fly correctly and with no control. Please double check for the correct orientation.

1. Push the propeller down the 5mm shaft.

2. Tighten the M5 lock nut and secure it.

3. Periodically check nut tightness to ensure it will stay tight during flight.

Propeller Type

There are two different propeller types given with buzz: Avan Flow 5x4.3x3 and Avan

Scimitar 5x2.6x3. These two props will give two different flight styles. The Avan Flow

5x4.3x3 flies very fast and operates well at higher speeds with the compromise of

lower flight time. Avan Scimitar 5x2.6x3 flies slower but with an increase of flight

time.

Antenna Mount

Mount the provided pagoda antenna to the back of the Buzz where the SMA port

mounts. Periodically check tightness to insure good video quality during each flight.

CCW

Buzz

emax-usa.com

Buzz VTX Operation

Vtx Schematic and Button Diagram

VTX Channel Settings with the Button

1. Menu Entry / Exit

(1)Press the button and hold for 5s to enter the menu

(2)Press the button and hold for 5s again to save parameters and exit the menu.

2. Band, Channel, and Power parameter change

After entering menu, short click button to switch frequency group band(b)/frequency

channel (C)/power (P).

3.Enter/Exit Parameters

(1) After choosing menu, press the button and hold for 2s to enter parameter option.

(2)Press and hold for 2s to exit the parameter selection and to move back a menu

option

4. Select Parameter

After entering desired menu, press the button to cycle through the parameters.

5. Save Selections

Press and hold for 5s.

Notice: When SmartAudio function is on, if the video receiver can't display image

such as showing only white noise, that is because flight controller set the VTX

frequency to an illegal one. While battery is connected you can press vtx button to

adjust the frequency to the legal one to display an image and after wards you can set

the frequency to legal one in OSD menu.

Buzz

emax-usa.com

Button Menu Diagram

CE and FCC unlicensed user chart

Unlocked FCC HAM licensed user chart

* From the factory this video transmitter is designed to operate within CE and FCC

unlicensed users specifications. To use the unlocked features of this VTX the user is

required to have a HAM radio license or prior consent from the FCC. By purchasing

this equipment, the user is agreeing that they understand these responsibilities and

will operate the equipment legally. Emax cannot be held responsible for your actions

if you purchase and/or use this product in violation of your government's regulations.

Buzz

emax-usa.com

Changing VTX setting via Betaflight OSD

Buzz is equipped with SmartAudio and is already configured with stock settings. The

SmartAudio line is operated on UART 6 TX.

1. Power on Buzz, Goggles, and Controller.

2. Follow the tips on screen to enter the main settings menu: THROTTLE MID+ YAW

LEFT+ PITCH UP to enter OSD parameter adjustment menu. as shown in Figure 2.

3. In the menu interface, switching PITCH up/down to choose menu option. Move the

cursor to “FEATURES” and stir Roll stick right to enter next menu. Using PITCH stick

to move cursor to “VTX SA”, as shown in Figure 3.Then pull ROLL stick right to enter

VTX configuration menu, as shown in Figure 4.

Figure 1 Figure 2

Figure 3 Figure 4

4. In the menu of VTX SA, we can configure the BAND, CHAN and POWER. Pulling

the PITCH stick to move cursor up and down to choose VTX options that need

setting. While pulling ROLL stick left and right to change the corresponding

parameters. Once the parameters is set, moving the cursor to “SET”, then turn ROLL

stick right to enter “SET” and choose “YES” and turn ROLL stick right to save setting

parameters, as shown in Figure 5.

Figure 5

Buzz

emax-usa.com

Buzz ESC

ESC Schematic and pinout Diagram.

The Buzz is using 4-in-one 45A 32-bit ESC. Buzz supports 3-6S Lipo.

Recommended 1300-1800 mAh 4S.

Signal Wires: S1-S4 is the signal input of ESC1-ESC4. Tx is ESC telemetry output

connected to UART 3 RX on the Buzz Flight Controller.

Buzz

emax-usa.com

Buzz Flight Controller

FC Schematic and pinout Diagram

Stock Flight Controller Settings

Buzz is configured to take a channel map of the TAER1234 convention. That is the

channel map is in the respective order: throttle, aileron, elevator, rudder, AUX

Channels. The arm switch on Buzz is set on AUX 1 and armed with the highest

value. AUX 3 is set to beeper with beeping on in a high state. AUX 4 is set to the

VTX power switch: High value is VTX on and Low value is VTX off.

Caution: Make sure your control is set with a channel map described above,

otherwise Buzz may not operate properly or even transmit video.

Camera control is already set up with stock settings and is connected to pin A08. To

enter the control menu of the camera, move throttle to middle throttle position and

yaw all the way right. You can move through the menu by pitching up and down. To

enter a menu or selection, yaw right. In this menu you can change exposure,

brightness, contrast, and many other camera settings.

PID profiles: PID profile 1 is tuned and optimized for Buzz for ultimate control of flight

indoors and outdoors. Please do not change these values. Change the rates to get

the flight control characteristic desired.

Caution: Changing PID settings can cause poor flight behavior and worst case

burning a motor or ESC. Departure from stock PIDs will void all warranty with the

Buzz.

Inhaltsverzeichnis

Andere Emax Drohne Handbücher

Emax

Emax Babyhawk Bedienungsanleitung

Emax

Emax Hawk 5 Sport Bedienungsanleitung

Emax

Emax Babyhawk Bedienungsanleitung

Emax

Emax Babyhawk O3 Bedienungsanleitung

Emax

Emax Nanohawk 1S BNF FrSky Bedienungsanleitung

Emax

Emax TinyHawk Freestyle Bedienungsanleitung

Emax

Emax Hawk 5 PRO Bedienungsanleitung

Emax

Emax TINYHAWK III Bedienungsanleitung

Emax

Emax Babyhawk II HD Bedienungsanleitung

Emax

Emax Tinyhawk II Race Bedienungsanleitung

Emax

Emax Tinyhawk II Bedienungsanleitung

Beliebte Drohne Handbücher anderer Marken

Ryze

Ryze Tello Bedienungsanleitung

PowerVision

PowerVision PowerRay Bedienungsanleitung

Force1

Force1 rogue F72 Bedienungsanleitung

Zerotech

Zerotech DOBBY Bedienungsanleitung

Protocol

Protocol VIDEODRONE AP Bedienungsanleitung

dji

dji Matrice M210 Bedienungsanleitung

SYMA

SYMA X440 Bedienungsanleitung

SYMA

SYMA X5UW(720P) Bedienungsanleitung

Dynali

Dynali 25 H Leitfaden

dji

dji PHANTOM 4 Bedienungsanleitung

Atlas

Atlas AtlasPRO Bedienungsanleitung

Twodots

Twodots TVVIN BOARD Bedienungsanleitung

GDU

GDU SAGA Bedienungsanleitung

RUKO

RUKO F11 Bedienungsanleitung

Ares

Ares ETHOS QX 130 Bedienungsanleitung

Walkera

Walkera ZHUN Bedienungsanleitung

dji

dji WIND-4 Bedienungsanleitung

Potensic

Potensic D58 Bedienungsanleitung