Emax Tinyhawk II Race Bedienungsanleitung
Thanks for purchasing the Tinyhawk II Race. Designed in California, assembled in
China.
Tinyhawk II Race
emax-usa.com
Disclaimer
Please read the disclaimer carefully before using this product. By using this product,
you hereby agree to this disclaimer and signify that you have read them carefully and
completely. This product is not suitable for people under the age of 18. Adult
supervision is highly recommended for kids under the age of 18.
Our Tinyhawk II Race features open-source flight controller and Electronic Speed
Controllers to meet the FPV enthusiasts' need to upgrade their quad.
Please read the instruction manual and warnings carefully. Before every flight, make
sure the battery is fully charged and power connections are secure. DO NOT fly
around crowds, children, animals or objects. EMAX ACCEPTS NO LIABILITY FOR
DAMAGE(S) OR INJURIES INCURRED DIRECTLY OR INDIRECTLY FROM THE
USE OF THIS PRODUCT.
Precautions
Please follow the instructions to assemble and to operate this product in a proper
way.
Pilots do not use this product if you have physical or mental illness, dizziness,
fatigued, or use while under the influence of alcohol or drugs.
Please fly in a safe area away from people
Do not modify or use other parts and accessories not approved for the use of EMAX.
Do not use this product in harsh environments (such as winds, rain, lightning, snow,
etc.).
Do not use this product in a strong electromagnetic environment.
Support
Please visit emax-usa.com (North America Region) or emaxmodel.com
(International) for any updates or support needs.
Tinyhawk II Race
emax-usa.com
Table of Contents
Disclaimer.................................................................................................................1
Precautions............................................................................................................... 1
Support .....................................................................................................................1
Product specification................................................................................................. 1
Tinyhawk II Race................................................................................................ 1
Parameter.......................................................................................................... 1
Product list............................................................................................................. 1
Tinyhawk II Race Structure....................................................................................2
Tinyhawk II Race....................................................................................................... 3
Propeller Direction and Mounting........................................................................... 3
Tinyhawk II Race VTX Settings................................................................................. 4
VTX Channel Settings with the Button................................................................... 4
CE and FCC unlicensed user chart........................................................................ 5
Unlocked FCC HAM licensed user chart............................................................... 5
Changing VTX setting via Betaflight OSD..............................................................6
Tinyhawk II Race All-in-One Flight Controller............................................................ 8
On-Board Receiver................................................................................................8
Binding Procedure.............................................................................................. 8
Emax Tinyhawk II Race Flight Controller (FC)....................................................... 9
Stock Flight Controller Settings..........................................................................9
Adjusting Software Settings (Betaflight Configurator).........................................9
Reprogramming Tinyhawk II Race Flight Controller ........................................... 9
Restoring the Tinyhawk II Race default settings............................................... 10
Flight....................................................................................................................... 11
Radio Stick Controls............................................................................................ 11
Left Stick Diagram............................................................................................ 11
Right Stick Diagram ......................................................................................... 11
Fly Tinyhawk II Race ........................................................................................... 11
Arming ............................................................................................................. 12
Flying Modes.................................................................................................... 12
Line of Sight Flying........................................................................................... 12
First Person View (FPV) Flying ........................................................................ 12
Tinyhawk II Race
1
emax-usa.com
Product specification
Product list
1. Tinyhawk II Race ×1
2. Emax 1s HV 450 mAh ×2
3. Charger ×1
4. Screwdriver x 1
5. Spare screws x 1
6. FC damper x 1
Tinyhawk II Race
Parameter
Diagonal wheelbase (without paddles)
90mm
Maximum size of the aircraft (without
antenna, cable tie)
119*110*40(mm)
Aircraft weight (without battery)
47.5g
Motor
TH1103 7500KV
Propeller
Avan Blur 2 Inch Propeller
Main Flight Controller
F4（MATEKF411RX firmware）
4 in one 5A ESC
SPI RX receiver（Compatible with Frsky D8
protocol）
Camera
RunCam Nano 2 Camera
Transmitter
0-25-100-200mW Adjustable frequency 37CH,
Support SmartAudio
Battery
2x 1 Cell 450 mAh HV lipo battery
Tinyhawk II Race
2
emax-usa.com
Tinyhawk II Race Structure
Tinyhawk II Race
3
emax-usa.com
Tinyhawk II Race
Propeller Direction and Mounting
There are 2 spinning directions for Tinyhawk II Race propellers, Clockwise (CW) and
Counter-Clockwise (CCW). When Buying a set of propellers, 2 CW and 2 CCW will
be given. The blunt leading edge indicates the direction the propeller is suppose to
rotate as compared to the sharp trailing edge. When mounting propellers please
make sure the correct orientation shown in the diagram below.
Caution: Failure to mount the propellers in the correct orientation will cause
Tinyhawk II Race to not fly correctly and with no control. Please double check for the
correct orientation.
1. Push the propeller down the motor
2. Tighten M2 screw and secure it.
3. Periodically check tightness to ensure it will stay tight during flight.
Tinyhawk II Race
4
emax-usa.com
Tinyhawk II Race VTX Settings
NOTE: Under normal operating conditions, please use the Betaflight OSD function to
change VTX (video transmitter) settings. Only use the VTX push button to unlock as
allowed for under the FCC and HAM licensing requirements, see below. If using the
VTX push button to change settings, please note that the settings will revert to the
Betaflight OSD's settings once the drone is power-cycled.
VTX Schematic and Button Diagram
VTX Channel Settings with the Button
1. Normal display
When powered on, the parameters of frequency group band, frequency point and
power are displayed twice by LED cycle., then the LED is extinguished. To check
frequency group band ,channel and power status click the button once quickly, and
LED starts to indicate frequency band band , frequency channel and power. First
indicate the frequency group band and then indicate the frequency channel, final
indicative power. After all 2 rounds of LED display cycles, all LED will be off.
2. Menu Entry / Exit
(1)Press the button and hold for 5s to enter the menu. After entering the menu,
band LED lights up.
(2)Press the button and hold for 5s again to save parameters and exit the menu.
After saving and exiting the menu, all LED goes out.
3.Enter/Exit Band / Channel / Power option
(1) After entering menu, short click button to switch frequency group band /
frequency point / power, and the LED of the corresponding menu is lit.
(2) Press the button and hold for 2s to enter frequency group band / channel /
power option.
Tinyhawk II Race
5
emax-usa.com
(3) Press the button and hold for 2s again to exit frequency group band / channel /
power option and return to the menu.
4. Band / Channel / Power parameter change
After entering frequency group band / channel / power option, short click button to
change the parameter.
Notice: If you change to an illegal channel using SmartAudio, there will be no image
transmitting from Tinyhawk II Race. To switch back to a legal channel, press the
button on the vtx and follow the vtx menu guide shown below.
CE and FCC unlicensed user chart
Unlocked FCC HAM licensed user chart
* From the factory this video transmitter is designed to operate within CE and FCC
unlicensed users specifications. To use the unlocked features of this VTX the user is
Tinyhawk II Race
6
emax-usa.com
required to have a HAM radio license or prior consent from the FCC.By purchasing
this equipment, the user is agreeing that they understand these responsibilities and
will operate the equipment legally. Emax cannot be held responsible for your actions
if you purchase and/or use this product in violation of your government's regulations.
Changing VTX setting via Betaflight OSD
Tinyhawk II Race is equipped with SmartAudio and is already configured with stock
settings. The SmartAudio line is operated on UART 2 TX.
1. Power on Tinyhawk II Race, goggles, and Controller.
2. Follow the tips on screen to enter the main settings menu: THROTTLE MID+ YAW
LEFT+ PITCH UP to enter OSD parameter adjustment menu. as shown in Figure 1.
3. In the menu interface, switching PITCH up/down to choose menu option. Move the
cursor to “FEATURES” and stir Roll stick right to enter next menu. as shown in
Figure 2. Using PITCH stick to move cursor to “VTX SA”, as shown in Figure 3.Then
pull ROLL stick right to enter VTX configuration menu, as shown in Figure 4.
Figure 1 Figure 2
Figure 3 Figure 4
4. In the menu of VTX SA, we can configure the BAND, CHAN and POWER. Pulling
the PITCH stick to move cursor up and down to choose VTX options that need
setting. While pulling ROLL stick left and right to change the corresponding
parameters.Once the parameters is set, moving the cursor to “SET”, then turn ROLL
stick right to enter “SET” and choose “YES” and turn ROLL stick right to save setting
parameters, as shown in Figure 5.
5. In the menu of VTX SA, moving cursor to "CONFIG" to enter menu; While moving
cursor to "PIT FMODE" and pulling ROLL stick right can turn off the VTX power, as
shown in Figure 6.
NOTE: Because the VTX module offers power setting of 25mW / 100mW / 200mW
by default the Betaflight OSD displays 25mW, 200mW and 800mW as power options
If you wish to have the VTX at 100mW setting select > 200mW
If you wish to have the VTX at 200mW setting select > 800mW
Tinyhawk II Race
7
emax-usa.com
Figure 5 Figure 6
Inhaltsverzeichnis
Andere Emax Drohne Handbücher
Emax
Emax Hawk 5 PRO Bedienungsanleitung
Emax
Emax Babyhawk II HD Bedienungsanleitung
Emax
Emax Tinyhawk II Bedienungsanleitung
Emax
Emax TinyHawk Freestyle Bedienungsanleitung
Emax
Emax Babyhawk Bedienungsanleitung
Emax
Emax Babyhawk O3 Bedienungsanleitung
Emax
Emax Hawk 5 Sport Bedienungsanleitung
Emax
Emax TINYHAWK III Bedienungsanleitung
Emax
Emax Babyhawk Bedienungsanleitung
Emax
Emax Nanohawk 1S BNF FrSky Bedienungsanleitung
