EMC VNX5500 Bedienungsanleitung

This guide describes one of five models available in the VNX Series, the EMC®

VNX5500™. This guide is a parts location guide and provides illustrations of the part

number label locations of orderable parts for the EMC VNX5500 platform. Included in this

parts location guide are also tables describing the individual VNX5500 parts or

components and how these components are identified as either customer replaceable

units (CRUs) or field replaceable units (FRUs).

This guide is available online at https://mydocs.emc.com/VNX/relatedDocs.jsp. From the

VNX Hardware Parts heading, click on the desired guide. The guide will appear in your

browser.

Topics include:

◆VNX5500 Block and File platform stackup ................................................................. 4

◆VNX5500 components .............................................................................................. 8

◆Standby power supply (SPS) ..................................................................................... 9

◆Disk processor enclosure (DPE)................................................................................. 9

◆SP power supply/cooling module............................................................................ 13

◆SP........................................................................................................................... 14

◆Control Station........................................................................................................ 16

◆Data Mover enclosure ............................................................................................. 17

◆Data Mover power supply/cooling fan module......................................................... 18

◆Data Mover CPU module.......................................................................................... 19

◆Management module .............................................................................................. 22

◆I/O modules............................................................................................................ 22

◆Small form-factor pluggable (SFP) ........................................................................... 34

◆DIMMs .................................................................................................................... 37

◆Disk-array enclosure (DAE) ...................................................................................... 41

EMC®VNX™Family

VNX5500™

Parts Location Guide

P/N 300-013-314

Rev 01

June 26, 2012

2 EMC VNX5500 Parts Location Guide

Product software and hardware release revisions

IMPORTANT

The part numbers listed in this guide are for reference only. Part numbers can change over

time, and this document does not keep pace with those changes. The EMC parts inventory

system will automatically substitute for the latest part numbers as required.

Product software and hardware release revisions

As part of an effort to improve its product lines, EMC periodically releases revisions of its

software and hardware. Therefore, some functions described in this document might not

be supported by all versions of the software or hardware currently in use. The product

release notes provide the most up-to-date information on product features.

Contact your EMC representative if a product does not function properly or does not

function as described in this document.

Note: This document was accurate at publication time. New versions of this document

might be released on the EMC online support website. Check the EMC online support

website to ensure that you are using the latest version of this document.

Revision history

The following table presents the revision history of this document:

Where to get help

EMC support, product, and licensing information can be obtained as follows:

Product information — For documentation, release notes, software updates, or

information about EMC products, licensing, and service, go to the EMC online support

website (registration required) at:

https://Support.EMC.com

Technical support — For technical support, go to EMC online support and select Support.

On the Support page, you will see several options, including one to create a service

request. Note that to open a service request, you must have a valid support agreement.

Contact your EMC sales representative for details about obtaining a valid support

agreement or with questions about your account.

Revision Date Description

A01 June 26, 2012 First release of the

VNX5500 Parts Location

Guide

with a document part number

How this document is organized

EMC VNX5500 Parts Location Guide 3

How this document is organized

The major sections of this guide are listed in the following table.

Related documentation

EMC provides the ability to create step-by-step planning, installation, and maintenance

instructions tailored to your environment. To create VNX customized documentation, go

to: https://mydocs.emc.com/VNX/.

To download a PDF copy of the desired publication, go to the following sections:

◆For hardware-related books, go to the About VNX section, and then select Learn about

VNX. Next, follow the steps in the wizard.

◆For technical specifications, go to the About VNX section, and then select View

technical specifications. Next, follow the steps in the wizard.

◆For installation, adding, or replacing tasks, go to the VNX tasks section, and then

select the appropriate heading. For example, to download a PDF copy of the

VNX5500

Block Installation Guide

, go to Install VNX and follow the steps in the wizard.

Title Description

“VNX5500 Block and File

platform stackup” on page 4

Describes and shows the front and rear views of a typical

VNX5500.

“VNX5500 components” on

page 8

Provides a description of the components that comprise a

VNX5500. Along with a description, illustrations of each

component are also shown.

“Standby power supply (SPS)”

on page 9

Describes and illustrates the part number label locations of the

SPS.

“Disk processor enclosure

(DPE)” on page 9

Describes and illustrates the part number label locations of the

DPE and the components that comprise the DPE.

“Control Station” on page 16 Describes and illustrates the part number label locations of the

CS.

“Data Mover enclosure” on

page 17

Describes and illustrates the part number label locations of the

DME and the management module.

“I/O modules” on page 22 Describes and illustrates the part number label locations of the

I/O modules that comprise the DPE and the DME.

“Small form-factor pluggable

(SFP)” on page 34

Describes and illustrates the part number label locations of the

SFP transceiver modules used in the DME.

“DIMMs” on page 37 Describes and illustrates the part number label locations of the

memory module or dual-inline memory modules (DIMMs) used

in the DPE and the DME.

“Disk-array enclosure (DAE)” on

page 41

Describes and illustrates the part number label locations of the

three types of DAEs available for the VNX5500.

4 EMC VNX5500 Parts Location Guide

VNX5500 Block and File platform stackup

◆For server-related tasks, go to the Server tasks for the VNX5300, VNX5500, VNX5700,

and VNX7500 section, and then select the appropriate heading. For example, to

download a PDF copy of Adding or replacing hardware, go to Add or replace hardware

and follow the steps in the wizard.

VNX5500 Block and File platform stackup

The Block and File VNX5500 platform comprises a 1U standby power supply (SPS), 3U

disk processor enclosure (DPE), 1U Control Station and 2U Data Mover enclosures.

Note: Throughout this guide, figure references are placed in the Part number label location

heading of tables because some of the tables have part number locations, as described in

Table 4 on page 12 and some do not, as described in Table 1 on page 9, for example. This

format is used throughout this guide.

Front view

On the front, viewing from top to bottom, a Block and File VNX5500 platform includes the

following hardware:

◆One to two 2U Data Mover enclosures with one, two, or three Data Movers

◆One to two 1U Control Stations

◆One 3U DPE chassis with either a:

• 15 (3.5-inch) disk drives (hot-swappable)

or,

• 25 (2.5-inch) disk drives (hot-swappable)

◆One dual 1U standby power supply (SPS)

Figure 1 on page 5 shows an example of the front of a Block and File VNX5500 with a 3U,

15 (3.5-inch) DPE.

VNX5500 Block and File platform stackup

EMC VNX5500 Parts Location Guide 5

Figure 1 Example of the Block and File VNX5500 platform with a 3U, 15 (3.5-inch) DPE (front view)

DVD

3U, 15 (3.5-inch)

disk processor

enclosure (DPE)

SPS

VNX-000566

DVD

Control Station 0

Control Station 1

(optional)

AC AC AC AC

Data Mover

enclosure 0

AC AC

Data Mover

enclosure 1

(optional)

6 EMC VNX5500 Parts Location Guide

VNX5500 Block and File platform stackup

Figure 2 shows an example of the front of a Block and File VNX5500 with a 3U, 25

(2.5-inch) DPE.

Figure 2 Example of the Block and File VNX5500 platform with a 3U, 25 (2.5-inch) DPE (front view)

Note: A basic Block and File VNX5500 platform has one to two 2U Data Mover enclosures,

one to two 1U Control Stations, a 3U DPE, and a dual 1U SPS. In the following sections, the

illustrations and corresponding tables describe these individual components. These

descriptions are for illustrative purposes only.

Rear view

On the rear, viewing from top to bottom, a Block and File VNX5500 platform includes the

following hardware components (Figure 3 on page 7):

◆One to two 2U Data Mover enclosures with one, two, or three Data Movers

◆One to two 1U Control Stations

◆One 3U DPE with two storage processors (SP A and B); each SP has one CPU module

and one power supply/cooling module

◆One dual 1U SPS

DVD

3U, 25 (2.5-inch)

disk processor

enclosure (DPE)

SPS

VNX-000615

DVD

Control Station 0

Control Station 1

(optional)

AC AC AC AC

Data Mover

enclosure 0

12345678910 11 12 13 14 15 16 17 18 19 20 21 22 23 24

AC AC

Data Mover

enclosure 1

(optional)

VNX5500 Block and File platform stackup

EMC VNX5500 Parts Location Guide 7

Figure 3 shows an example of the rear of a Block and File VNX5500 platform with a dual

SPS, a DPE, two Control Stations, two Data Mover enclosures with three Data Movers.

Figure 3 Example of Block and File VNX5500 platform (rear view)

VNX-000567

MGMT

SPS

Disk

processor

enclosure

2345

6Gb

SAS

8Gb

bre 1

0 X4

6Gb SAS

2345

6Gb

SAS

8Gb

bre 1

0 X4

6Gb SAS

MGMT

0123

012 3

0123

012 3

0123

012 3

Data Mover

enclosure 0

Control Station 0

Control Station 1

(optional)

0123

012 3

0123

012 3

0123

012 3

Data Mover

enclosure 1

(optional)

0123

PARTNUMBER

REV A09 A

0123

PARTNUMBER

REV A09 A

0123

PARTNUMBER

REV A09 A

0123

PARTNUMBER

REV A09 A

8 EMC VNX5500 Parts Location Guide

VNX5500 components

Viewing from the bottom to the top, the Block and File VNX5500 platform includes several

components. The following sections discuss each component in an illustration and table.

The illustration will show or point out the location of the part number label on the

component. The table will list the part number, describe the component or part, and tell

you if it is a FRU or CRU or both.

◆Dual 1U Standby power supply (SPS)

◆3U Disk processor enclosure (DPE)

• 3U, 15 (3.5-inch) disk drive

• 3U, 25 (2.5-inch) disk drive

• Storage processor (SP) power supply/cooling module

• Storage processor

◆1U Control Station (CS)

◆2U Data Mover enclosure (DME)

• DM power supply/cooling module

• DM CPU module

•Managementmodule

◆I/O modules

• SP I/O modules

• DM I/O modules

◆Small form-factor pluggable (SFP) transceiver modules

◆Dual in-line memory modules (DIMMs)

•SPDIMMs

• DM DIMMs

◆Disk-array enclosures (DAEs)

• 3U, 15 (3.5-inch) disk drive

• 2U, 25 (2.5-inch) disk drive

• 4U, 60 (2.5- or 3.5-inch) disk drive

Standby power supply (SPS)

EMC VNX5500 Parts Location Guide 9

Standby power supply (SPS)

The Block and File VNX5500 platform can support up to two 1U standby power supplies or

dual (SPSs) to provide temporary emergency power to the Block and File VNX5500

platform. Part numbers for the SPS are only on the rear of the product.

Figure 4 shows the part number location of a dual 1U SPS.

Figure 4 Example of a dual SPS

Table 1 lists the part number label location, part number, description, and whether it is a

FRU or CRU.

Disk processor enclosure (DPE)

The 3U DPE has part numbers visible on both the front and rear.

Front view

The DPE has two types of disk drive carriers:

◆3U, 15 (3.5-inch) disk drives

◆3U, 25 (2.5-inch) disk drives

DPE 3U, 15 (3.5-inch) disk drive

Figure 5 on page 10 shows the front view of the DPE 3U, 15 (3.5-inch) disk drives.

Note: You can visually distinguish disk module kinds by their type, capacity, and speed

labels, and by the design of the latch and handle on each disk module (Figure 5 on

page 10).

900-XXX-0014 0082

A00REV

S/N

900-XXX-0014 0082

A00REV

S/N

Part Number (P/N) label CNS-001545

Table 1 SPS part number

Part number label

location (Figure 4) Part number Description FRU CRU

078-000-084

078-000-085

DC standby power supply (SPS)

1200W



10 EMC VNX5500 Parts Location Guide

Disk processor enclosure (DPE)

Figure 5 Example of the DPE 3U, 15 (3.5-inch) disk drive (front view)

Note: Figure 5 is for illustrative purposes only. The front of the disk modules may be a little

different than the ones in your particular cabinet.

Table 2 is an example of the parts available for the 3U, 15 (3.5-inch) DPE and lists the part

number label location, part number, description, and whether it is a FRU or CRU.

IMPORTANT

Due to the extensive variety of disk module types, Table 2 only lists two disk types. EMC

recommends that you refer to the latest

EMC VNX5500, VNX5700, and VNX7500 Series

Storage Systems Disk and OE Matrix

Guide

to ensure that you have the correct part for

your configuration.

Part Number Label

VNX-000607

Table 2 DPE 3U, 15 (3.5-inch) disk module part numbers

Part number label

location (Figure 5) Part number Description (see note) FRU CRU

005049175 300 GB, 6 Gb/s SAS, 10k rpm 

005049249 600 GB, 6 Gb/s SAS, 15k rpm 

Note: The description field describes the disk module type, capacity, drive type, and spindle

speed (rpm).

Inhaltsverzeichnis

Andere EMC Lagerung Handbücher

EMC

EMC AX4-5 Bedienungsanleitung

EMC

EMC VNX5300 Block Bedienungsanleitung

EMC

EMC Data Domain DD990 Montageanleitung

EMC

EMC VNX5300 Block Betriebsanleitung

EMC

EMC Connectrix EC-1200 Technisches Handbuch

EMC

EMC DATA DOMAIN DD4500 Montageanleitung

EMC

EMC Celerra NS20 Bedienungsanleitung

EMC

EMC Celerra NS40 Gebrauchsanweisung

EMC

EMC Celerra NX4 Bedienungsanleitung

EMC

EMC DATA DOMAIN DD160 Montageanleitung

EMC

EMC CX500I - Insignia CLARiiON NAS Server Bedienungsanleitung

EMC

EMC Data Domain DD860 Montageanleitung

EMC

EMC DATA DOMAIN DD7200 Montageanleitung

EMC

EMC CLARiiON AX150 Series Produkthandbuch

EMC

EMC VPLEX Montageanleitung

EMC

EMC Atmos Montageanleitung

EMC

EMC Iomega StorCenter ix2-dl Bedienungsanleitung

EMC

EMC VNX Series Bedienungsanleitung

EMC

EMC VNX Series Bedienungsanleitung

EMC

EMC CX3-10 Bedienungsanleitung

EMC

EMC VMAX 100K Bedienungsanleitung

EMC

EMC FC4700 Technisches Handbuch

EMC

EMC Celerra NS20FC Bedienungsanleitung

EMC

EMC CloudBoost 100 Montageanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung