Emerson COPELAND XC PRO Betriebsanleitung

TI_Unit_OMTE_CO2_Scroll_01_EN_Rev00 1/6

Date of last update: Feb-23

Ref: TI_Unit_OMTE_CO2_Scroll_01_EN_Rev00

Application Engineering Europe

XC PRO CONTROLLER – BIOS UPDATE

QUICK USER’S MANUAL

1. Connect laptop to controller:

a. Identify the IP address of the controller.

i. Go to the "Service" menu on the Visotouch display connected to the controller (yellow

wrench icon) →Scroll down to "Conf IP & MDB Management" →The IP address is shown

in this menu.

ii. The default IP address of the controller is 192.168.0.250.

TI_Unit_OMTE_CO2_Scroll_01_EN_Rev00 2/6

b. Connect the laptop to the controller with a crossover cable.

c. The laptop can only communicate with the controller if they are in the same network.

i. Disconnect the laptop from your company data network.

ii. In the Windows environment go to "Network & Internet Settings", then "Change adapter

options".

iii. Select "Ethernet" and "Properties".

TI_Unit_OMTE_CO2_Scroll_01_EN_Rev00 3/6

iv. Click on "Internet Protocol Version 4 (TCP/IPv4)" and "Properties".

v. In "Properties" set the IP parameters according to the IP address of the controller.

vi. Click on "OK" to confirm.

TI_Unit_OMTE_CO2_Scroll_01_EN_Rev00 4/6

d. Open the webpage of the controller.

i. Go to the browser.

ii. Enter the IP address of the controller.

iii. Enter username "admin" and password "Dixell" to login.

e. Open "Info" page on the left.

TI_Unit_OMTE_CO2_Scroll_01_EN_Rev00 5/6

2. Load empty application:

a. Prepare USB stick with following folders and correct isadix file in folder "app". Contact the Emerson

Application Engineering department for the correct isadix file.

b. Connect USB stick to the controller.

c. Session will become invalid (after a few minutes).

d. Reload the page.

e. Application release shows "Restore isadix (Validating)".

f. When the message “(Validating)” disappears (reloading of the page might be necessary), remove

the USB stick.

TI_Unit_OMTE_CO2_Scroll_01_EN_Rev00 6/6

3. Load new BIOS:

a. Prepare USB stick with following folders and correct zupdater file in folder "bios" and correct isadix

file in folder "app". Contact the Emerson Application Engineering department for the correct zupdater

and isadix files.

b. Connect USB stick to the controller.

c. Session will become invalid (after a few minutes).

d. Reload the page.

e. BIOS and application release show "(Validating)".

f. When the message "(Validating)" disappears (reloading of the page might be necessary), remove

the USB stick.

g. Update is successful if the correct number is shown in row "BIOS Release" without "(Validating)".

DISCLAIMER

1. The contents of this publication are presented for informational purposes only and are not to be construed as warranties or

guarantees, express or implied, regarding the products or services described herein or their use or applicability.

2. Emerson Climate Technologies GmbH and/or its affiliates (collectively "Emerson"), as applicable, reserve the right to modify

the design or specifications of such products at any time without notice.

3. Emerson does not assume responsibility for the selection, use or maintenance of any product.Responsibility for proper

selection, use and maintenance of any Emerson product remains solely with the purchaser or end user.

4. Emerson does not assume responsibility for possible typographic errors contained in this publication.

Inhaltsverzeichnis

Andere Emerson Controller Handbücher

Emerson

Emerson Bettis XTE3000 Bedienungsanleitung

Emerson

Emerson DL8000 Bedienungsanleitung

Emerson

Emerson CSB400 Series Bedienungsanleitung

Emerson

Emerson Dixell iProChill IPC115D Benutzerhandbuch

Emerson

Emerson SW93 Bedienungsanleitung

Emerson

Emerson Dixell XRB06CH Verdrahtungsschema

Emerson

Emerson NELSON CM-2201 Bedienungsanleitung

Emerson

Emerson Dixell XR64CX Verdrahtungsschema

Emerson

Emerson Fisher FIELDVUE DVC6000 HW2 Bedienungsanleitung

Emerson

Emerson Double-Acting Series Montageanleitung

Emerson

Emerson Dixell XR40D Verdrahtungsschema

Emerson

Emerson Fisher 61 Series Bedienungsanleitung

Emerson

Emerson BETTIS TEC2 CCM Installationshandbuch

Emerson

Emerson Fisher 299H Bedienungsanleitung

Emerson

Emerson Bettis XTE3000 Bedienungsanleitung

Emerson

Emerson PACSystems RSTi-EP Bedienungsanleitung

Emerson

Emerson HVAC Drive H300 Bedienungsanleitung

Emerson

Emerson Bettis 500 Bedienungsanleitung

Emerson

Emerson Digitax ST Bedienungsanleitung

Emerson

Emerson ECD-002 Bedienungsanleitung

Emerson

Emerson Level-Trol 2500 Series Bedienungsanleitung

Emerson

Emerson NELSON CM-GP Bedienungsanleitung

Emerson

Emerson Fisher 161AY Series Bedienungsanleitung

Emerson

Emerson Bettis Electro-Hydraulic Operated Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung