Emerson Unidrive m300 Bedienungsanleitung

Quick Start Guide

Unidrive M300

Frame sizes 1 to 4

Enhance throughput with

Machine Safety

Part Number: 0478-0039-05

Issue: 5

Unidrive M300 Quick Start Guide English Iss4.book Page 1 Wednesday, July 16, 2014 8:38 AM

This guide is intended to provide basic information required in order to set-up a drive to run a motor.

For more detailed installation information, please refer to the Unidrive M300 User Guide which is

available to download from:

www.controltechniques.com/userguides or www.emersonindustrial.com/en-EN/leroy-somer-motors-

drives/downloads/Pages/manuals.aspx

Warnings, Cautions and Notes

Issue Number: 5

A Warning contains information which is essential for avoiding a safety hazard.

A Caution contains information which is necessary for avoiding a risk of damage to the

product or other equipment.

A Note contains information, which helps to ensure correct operation of the product.

This guide does not include safety information. Incorrect installation or operation of the

drive, could cause personnel injury or equipment damage. For essential safety

information, please refer to the Unidrive M300 User Guide or the safety booklet supplied

with the drive.

WARNING

CAUT IO N

NOTE

WARNING

Unidrive M300 Quick Start Guide English Iss4.book Page 2 Wednesday, July 16, 2014 8:38 AM

Unidrive M300 Quick Start Guide

Issue Number: 5

Contents

1 Product information ....................................................................................7

1.1 Ratings .................................................................................................................... 7

2 Options .........................................................................................................8

3 Mechanical installation ...............................................................................9

4 Electrical installation .................................................................................11

4.1 AC supply requirements ........................................................................................ 11

4.2 External braking resistor ........................................................................................ 11

4.3 Ground leakage ..................................................................................................... 12

4.4 Control terminal configurations and wiring ............................................................. 14

4.5 EMC ....................................................................................................................... 20

4.6 SAFE TORQUE OFF (STO) .................................................................................. 21

5 Keypad and display ...................................................................................22

5.1 Saving parameters ................................................................................................ 23

5.2 Restoring parameter defaults ................................................................................ 23

6 Basic parameters (Menu 0) .......................................................................24

6.1 Menu 0: Basic parameters ..................................................................................... 24

7 Running the motor ....................................................................................30

8 NV Media Card Operation .........................................................................31

9 UL listing information ...............................................................................32

9.1 General .................................................................................................................. 32

9.2 Mounting ................................................................................................................ 32

9.3 Environment .......................................................................................................... 32

9.4 Electrical ratings .................................................................................................... 32

9.5 Opening of branch circuit ....................................................................................... 32

9.6 Electrical installation .............................................................................................. 32

9.7 cUL requirements for frame size 4 ......................................................................... 33

9.8 Motor overload protection ...................................................................................... 33

9.9 Motor overspeed protection ................................................................................... 33

9.10 Thermal memory retention ..................................................................................... 33

9.11 Group installation ................................................................................................... 34

9.12 UL listed accessories ............................................................................................. 34

Unidrive M300 Quick Start Guide English Iss4.book Page 3 Wednesday, July 16, 2014 8:38 AM

4Unidrive M300 Quick Start Guide

Issue Number: 5

Declaration of Conformity

This declaration applies to Unidrive M variable speed drive products, comprising models numbers as shown below:

The AC variable speed drive products listed above have been designed and manufactured in accordance with the

following European harmonized standards:

EN 61000-3-2:2006 Applicable where input current <16 A. No limits apply for professional equipment where input

power >1 kW.

Control Techniques Ltd

The Gro

Newtown

Powys

SY16 3BE

Moteurs Leroy-Somer

Usine des Agriers

Boulevard Marcellin Leroy

CS10015

16915 Angoulême Cedex 9

France

Maaa-bbcddddd Valid characters:

aaa 100, 101, 200, 201, 300, 400

bb 01, 02, 03, 04, 05, 06, 07, 08

c1, 2, 4, 5 or 6

ddddd

00017, 00024, 00033, 00042

00013, 00018, 00023, 00024, 00032, 00033, 00041, 00042, 00056, 00075

00056, 00073, 00094, 00100

00133, 00135, 00170, 00176

00030, 00040, 00069, 00250, 00270, 00300

00100, 00150, 00190, 00230, 00290, 00330, 00350, 00420, 00440, 00470

00190, 00240, 00290, 00380, 00440, 00540, 00550, 00610, 00660, 00750, 00770, 00830,

01000

00630, 00860, 01160, 01320, 01340, 01570

EN 61800-5-1:2007 Adjustable speed electrical power drive systems - safety requirements -

electrical, thermal and energy

EN 61800-3:2004 Adjustable speed electrical power drive systems. EMC product standard

including specific test methods

EN 61000-6-2:2005 Electromagnetic compatibility (EMC). Generic standards. Immunity

standard for industrial environments

EN 61000-6-4:2007 Electromagnetic compatibility (EMC). Generic standards. Emission

standard for industrial environments

EN 61000-3-2:2006 Electromagnetic compatibility (EMC), Limits, Limits for harmonic current

emissions (equipment input current <16 A per phase)

EN 61000-3-3:2008

Electromagnetic compatibility (EMC), Limits, Limitation of voltage

fluctuations and flicker in low-voltage supply systems for equipment with

rated current <16 A

Unidrive M300 Quick Start Guide English Iss4.book Page 4 Wednesday, July 16, 2014 8:38 AM

Unidrive M300 Quick Start Guide 5

Issue Number: 5

These products comply with the Low Voltage Directive 2006/95/EC, the Electromagnetic Compatibility Directive

2004/108/EC.

These electronic drive products are intended to be used with appropriate motors, controllers,

electrical protection components and other equipment to form complete end products or

systems. Compliance with safety and EMC regulations depends upon installing and

configuring drives correctly, including using the specified input filters. The drives must be

installed only by professional assemblers who are familiar with requirements for safety and

EMC. The assembler is responsible for ensuring that the end product or system complies

with all the relevant laws in the country where it is to be used. Refer to the User Guide. An

EMC Data Sheet is also available giving detailed EMC information.

Declaration of Conformity (including 2006 Machinery Directive)

This declaration applies to Unidrive M variable speed drive products, comprising models numbers as shown below:

This declaration relates to these products when used as a safety component of a machine. Only the SAFE

TORQUE OFF function may be used for a safety function of a machine. None of the other functions of the

drive may be used to carry out a safety function.

These products fulfil all the relevant provisions of Directive 2006/42/EC (The Machinery Directive).

EC type-examination has been carried out by the following notified body:

TÜV Rheinland Industrie Service GmbH

Alboinstraße 56

12103 Berlin, Germany

Notified Body identification number: 0035

EC type-examination certificate number: 01/205/5383.00/14 and 01/205/5387.00/14

Maaa-bbbbbbbbb Valid characters:

aaa 300, 400

bbbbbbbbb

01100017A, 01100024A, 01200017A, 01200024A, 01200033A, 01200042

02100042A, 02100056A, 02200024A, 02200033A, 02200042A, 02200056A, 02200075A,

02400013A, 02400018A, 02400023A,

02400032A, 02400041A

03200100A, 03400056A, 03400073A, 03400094A

04200133A, 04200176A, 04400135A, 04400170A

05200250A, 05400270A, 05400300A, 05500030A, 05500040A, 05500069A

06200330A, 06200440A, 06400350A, 06400420A, 06400470A, 06500100A, 06500150A,

06500190A, 06500230A, 06500290A,

06500350A

07200610A, 07200750A, 07200830A, 07400660A, 07400770A, 07401000A, 07500440A,

07500550A, 07600190A, 07600240A,

07600290A, 07600380A, 07600440A, 07600540A

08201160A, 08201320A, 08401340A, 08401570A, 08500630A, 08500860A, 08600630A,

08600860A

T. Alexander

VP Technology

Date: 29th May 2014

Place: Newtown, Powys. UK

Unidrive M300 Quick Start Guide English Iss4.book Page 5 Wednesday, July 16, 2014 8:38 AM

6Unidrive M300 Quick Start Guide

Issue Number: 5

The harmonised standards used are shown below:

Person authorised to compile the technical file:

C Hargis

Chief Engineer

Newtown, Powys. UK

IMPORTANT NOTICE

These drive products are intended to be used with appropriate motors, sensors, electrical protection

components and other equipment to form complete systems. It is the responsibility of the installer to

ensure that the design of the complete machine, including its safety-related control system, is carried out

in accordance with the requirements of the Machinery Directive and any other relevant legislation. The use

of a safety-related drive in itself does not ensure the safety of the machine.

Compliance with safety and EMC regulations depends upon installing and configuring inverters correctly.

The inverters must be installed only by professional assemblers who are familiar with requirements for

safety and EMC. The assembler is responsible for ensuring that the end product or system complies with

all the relevant laws in the country where it is to be used. Refer to the User Guide.

EN 61800-5-1:2007 Adjustable speed electrical power drive systems. Safety requirements. Electrical,

thermal and energy

EN 61800-5-2:2007 Adjustable speed electrical power drive systems. Safety requirements. Functional

EN ISO 13849-1:2008 Safety of machinery. Safety-related parts of control systems. General principles for

design

EN ISO 13849-2:2008 Safety of machinery. Safety-related parts of control systems. Validation

EN 62061:2005 Safety of machinery. Functional safety of safety related electrical, electronic and

programmable electronic control systems

T. Alexander

VP Technology

Date: 9th April 2014

Place: Newtown, Powys. UK

Unidrive M300 Quick Start Guide English Iss4.book Page 6 Wednesday, July 16, 2014 8:38 AM

Unidrive M300 Quick Start Guide 7

Issue Number: 4

1 Product information

1.1 Ratings

Model

Input

phases

Max.

cont

input

current

Max input

fuse rating

Nominal cable size Output current

European USA

1 Ph 3 Ph Input Output Input Output

Max.

cont

output

current

Nominal

power

Motor

power

ph A A A mm2mm2AWG AWG A kW hp

01100017 1 8.7 10 1 1 16 16 1.7 0.25 0.33

01100024 1 11.1 16 1 1 14 16 2.4 0.37 0.5

01200017 1 4.5 6 1 1 16 16 1.7 0.25 0.33

01200024 1 5.3 6 1 1 16 16 2.4 0.37 0.5

01200033 1 8.3 10 1 1 16 16 3.3 0.55 0.75

01200042 1 10.4 16 1 1 16 16 4.2 0.75 1

02100042 1 18.8 20 2.5 1 12 16 4.2 0.75 1

02100056 1 24 25 4 1 10 16 5.6 1.1 1.5

02200024 1 / 3 5.3/4.1 6 6 1 1 16 16 2.4 0.37 0.5

02200033 1 / 3 8.3/6.7 10 10 1 1 16 16 3.3 0.55 0.75

02200042 1 / 3 10.4/7.5 16 10 1 1 16 16 4.2 0.75 1

02200056 1 / 3 14.9/11.3 20 15 2.5/1.5 1 12/14 16 5.6 1.1 1.5

02200075 1 / 3 18.1/13.5 20 15 2.5 1 12 16 7.5 1.5 2

02400013 3 2.4 6 1 1 16 16 1.3 0.37 0.5

02400018 3 2.9 6 1 1 16 16 1.8 0.55 0.75

02400023 3 3.5 6 1 1 16 16 2.3 0.75 1

02400032 3 5.1 61 116163.21.11.5

02400041 3 6.2 10 1 1 16 16 4.1 1.5 2

03200100 1 / 3 23.9/17.7 25 20 4 1.5 10/12 14 10 2.2 3

03400056 3 8.7 10 1 1 14 16 5.6 2.2 3

03400073 3 12.2 16 1.5 1 12 16 7.3 3 3

03400094 3 14.8 16 2.5 1.5 12 14 9.4 4 5

04200133 1 / 3 23.7/16.9 25 20 4/2.5 2.5 10 12 13.3 3 3

04200176 3 21.3 25 4 2.5 10 12 17.6 4 5

04400135 3 16.3 20 2.5 2.5 10 12 13.5 5.5 7.5

04400170 3 20.7 25 4 2.5 10 12 17 7.5 10

The nominal cable sizes shown in the table above, are provided as a guide only. Ensure

that the cables used conform to the local wiring regulations.

NOTE

Unidrive M300 Quick Start Guide English Iss4.book Page 7 Wednesday, July 16, 2014 8:38 AM

8Unidrive M300 Quick Start Guide

Issue Number: 4

Figure 1-1 Model number structure

2Options

Table 2-1 System Integration (SI) option module identification

Type Option module Color Name Further details

Fieldbus

Purple SI-PROFIBUS

See relevant option

module User Guide

Medium

Grey SI-DeviceNet

Light Grey SI-CANopen

Beige SI-Ethernet

Brown Red SI-EtherCAT

Automation

(I/O expansion) Orange SI-I/O

Product line:

Frame size:

Current Rating :

Heavy Duty current rating x10

Drive Format :

A – AC in AC out

Voltage rating:

1 - 100 V (100 - 120 10 %)±

2 - 200 V (200 - 240 10 %)±

4 - 400 V (380 - 480 10 %)±

5 - 575 V (500 - 575 10 %)±

6 - 690 V (500 - 690 10 %)±

Derivative Electrical Specifications

M300 - 03 4 00073 A

Unidrive M300 Quick Start Guide English Iss4.book Page 8 Wednesday, July 16, 2014 8:38 AM

Unidrive M300 Quick Start Guide 9

Issue Number: 4

Table 2-2 Adaptor Interface (AI) option module identification

3 Mechanical installation

The drives can be panel mounted with 0 mm space between the drives. For further information on

mechanical installation refer to the Drive User Guide.

To remove the terminal cover, use a flat bladed screwdriver to rotate the terminal cover locating clip

by approximately 30° in a counter clockwise direction, and then slide the cover down.

Type Option module Name Further Details

Communications AI-485 Adaptor

See Drive User Guide

Backup AI-Backup Adaptor

Drive

Size

HWD M1M2∅AB

mm in mm in mm in mm in mm in mm in mm in mm in

1 160 6.30 75 2.95 130 5.12 143 5.70 53 2.08 5 0.2

0.00 0.00 100 3.93

2 205 8.07 78 3.07 150 5.91 194 7.63 55 2.17 5 0.2

3 226 8.90 90 3.54 160 6.30 215 8.46 70.7 2.80 5 0.2

4 277 10.91 115 4.53 175 6.89 265 10.43 86 3.40 6 0.23

HM1

Cover

release

Unidrive M300 Quick Start Guide English Iss4.book Page 9 Wednesday, July 16, 2014 8:38 AM

10 Unidrive M300 Quick Start Guide

Issue Number: 4

Table 3-1 Tools required

Table 3-2 Recommended torque settings

Figure 3-1 Feature diagram (size 2 shown)

Tool Location Size 1 Size 2 Size 3 Size 4

Small terminal screwdriver Control, relay and STO terminals 9999

3mm Flat-bladed screwdriver Power terminals 9

5mm Flat-bladed screwdriver Terminal cover 9999

Pozidrive 1 screwdriver AC power terminals 9

Pozidrive 2 screwdriver Power terminals 999

Torx 10 driver EMC & MOV screws 9999

Torx 15 driver Fan screw 9

Torx 20 driver Fan screw 999

Model size Terminal block

description Torque settings

All Control terminals 0.2 N m (0.15 Ib ft)

Relay terminals 0.5 N m (0.37 Ib ft)

1Power terminals 0.5 N m (0.37 Ib ft)

2, 3, 4 1.4 N m (1.03 Ib ft)

Key

1. Rating label (On side of drive)

2. Identification label

3. Option module connection

4. Relay connections

5. Control connections

6. Braking terminal

7. Internal EMC filter screw

8. DC bus +

9. DC bus -

10. Motor connections

11. AC supply connections

12. Ground connections

13. SAFE TORQUE OFF connections

Unidrive M300 Quick Start Guide English Iss4.book Page 10 Wednesday, July 16, 2014 8:38 AM

Inhaltsverzeichnis

Andere Emerson Controller Handbücher

Emerson

Emerson CPHE Bedienungsanleitung

Emerson

Emerson Tartarini FL Bedienungsanleitung

Emerson

Emerson Hytork XL26 Gebrauchsanweisung

Emerson

Emerson Rosemount 3490 Series Bedienungsanleitung

Emerson

Emerson Fisher FIELDVUE DVC6005 Series Bedienungsanleitung

Emerson

Emerson ROC809 Bedienungsanleitung

Emerson

Emerson Dixell XM670K Verdrahtungsschema

Emerson

Emerson El-O-Matic E Series Bedienungsanleitung

Emerson

Emerson CSB600 Series Bedienungsanleitung

Emerson

Emerson Fisher 630 Series Bedienungsanleitung

Emerson

Emerson Vilter MicroVission Bedienungsanleitung

Emerson

Emerson Dixell XRi60CH Verdrahtungsschema

Emerson

Emerson Leroy Somer R450 Bedienungsanleitung

Emerson

Emerson Dixell XR60CHC Verdrahtungsschema

Emerson

Emerson Bettis SMART EHO G Series Betriebsanleitung

Emerson

Emerson TARTARINI RP Series Bedienungsanleitung

Emerson

Emerson EIM 2000 Series Bedienungsanleitung

Emerson

Emerson Asset Management Tag Bedienungsanleitung

Emerson

Emerson PACSystems RX3i IC695CPE330 Bedienungsanleitung

Emerson

Emerson Aventics SENTRONIC HD 616 Series Bedienungsanleitung

Emerson

Emerson EXD-SH2K Bedienungsanleitung

Emerson

Emerson FloBoss 107 Bedienungsanleitung

Emerson

Emerson P159A Series Montage- und Bedienungsanleitung

Emerson

Emerson Dixell XR20T Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch

Regin

Regin CORRIGO L10 Bedienungsanleitung

Emerson unidrive m300 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken