Emerson Rosemount 1595 Bedienungsanleitung

www.rosemount.com

Reference Manual

00809-0100-4828, Rev AA

October 2003

Rosemount 1595 Conditioning Orifice Plate

Reference Manual

00809-0100-4828, Rev AA

October 2003 Rosemount 1595

www.rosemount.com

Table of Contents

SECTION 1

Introduction

Using This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Receiving and Inspection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Returning the Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

SECTION 2

Installation

Safety Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Location and Orientation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Horizontal Pipe Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Vertical Pipe Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

1595 Straight Pipe Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

Standard Pipe Schedule. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

Standard Meter Section Lengths . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6

Rosemount 1595 Types: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6

Rosemount 1496 Types: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6

Rosemount 1497 Types: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7

APPENDIX A

Specifications and

Reference Data

Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

Functional . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

Physical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2

Dimensional Drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3

Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4

APPENDIX B

Installation Drawings

Standard Dimensional Drawings for Rosemount 1496 . . . . . . . . . . . . B-1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-4

Standard Dimensional Drawings for Rosemount 1497 . . . . . . . . . . . . B-5

Reference Manual

00809-0100-4828, Rev AA

October 2003

Rosemount 1595

TOC-2

Reference Manual

00809-0100-4828, Rev AA

October 2003 Rosemount 1595

www.rosemount.com

Rosemount 1595 Conditioning

Orifice Plate

NOTICE

Read this manual before working with the product. For personal and system safety, and for

optimum product performance, make sure you thoroughly understand the contents before

installing, using, or maintaining this product.

The United States has two toll-free assistance numbers and one International number.

Customer Central

1-800-999-9307 (7:00 a.m. to 7:00 P.M. CST)

International

1-(952) 906-8888

National Response Center

1-800-654-7768 (24 hours a day)

Equipment service needs

The products described in this document are NOT designed for nuclear-qualified

applications. Using non-nuclear qualified products in applications that require

nuclear-qualified hardware or products may cause inaccurate readings.

For information on Rosemount nuclear-qualified products, contact your local Emerson

Process Management Representative.

This device is intended for use in temperature monitoring applications and should not be

used in control and safety applications.

Reference Manual

00809-0100-4828, Rev AA

October 2003 Rosemount 1595

www.rosemount.com

Section 1 Introduction

Using This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 1-1

Receiving and Inspection . . . . . . . . . . . . . . . . . . . . . . . . . page 1-1

Returning the Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 1-1

USING THIS MANUAL This product manual provides installation, configuration, calibration,

troubleshooting, and maintenance instructions for the Rosemount 1595

Conditioning Orifice Plate

Section 2: Installation

Appendix A: Specifications and Reference Data

Appendix B: Approvals

RECEIVING

AND INSPECTION

Flowmeters are available in different models and with different options, so it is

important to inspect and verify that the appropriate model was delivered

before installation.

Upon receipt of the shipment, check the packing list against the material

received and the purchase order. All items are tagged with a model number,

serial number, and customer tag number. Report any damage to the carrier.

RETURNING THE

PRODUCT

To expedite the return process, call the Rosemount National Response

Center toll-free at 800-654-7768. This center, available 24 hours a day, will

assist you with any needed information or materials.

The center will ask for the following information:

• Product model

• Serial numbers

• The last process material to which the product was exposed

The center will provide

• A Return Material Authorization (RMA) number

• Instructions and procedures that are necessary to return goods that

were exposed to hazardous substances

NOTE

If a hazardous substance is identified, a Material Safety Data Sheet (MSDS),

required by law to be available to people exposed to specific hazardous

substances, must be included with the returned materials.

Reference Manual

00809-0100-4828, Rev AA

October 2003

Rosemount 1595

1-2

Reference Manual

00809-0100-4828, Rev AA

October 2003 Rosemount 1595

www.rosemount.com

Section 2 Installation

Safety Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2-1

Location and Orientation . . . . . . . . . . . . . . . . . . . . . . . . . . page 2-2

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2-6

SAFETY MESSAGES Instructions and procedures in this section may require special precautions to

ensure the safety of the personnel performing the operations. Please refer to

the following safety messages before performing any operation in this section.

Checklist The following is a summary of the steps required to complete a 1595

installation.

If this is a new installation, begin with step 1.

If the mounting is already in place, verify that the orifice flange size and rating

match the recommended specification and begin with step 5.

1. Determine where the 1595 is to be place within the piping system.

2. Establish the proper orientation as determined by the intended

service for the orifice plate.

3. Review “Location and Orientation” on page 2-2.

4. Confirm the 1595 configuration.

5. Measure the pipe’s internal diameter (I.D.), preferably at 1 x I.D. from

the orifice flange (upstream or downstream).

NOTE

Providing the pipe’s I.D. at the time of purchasing the 1595 is necessary to

maintain published orifice plate accuracy.

6. Install the orifice plate.

7. Check for leaks.

8. Commission the orifice plate.

Failure to follow these installation guidelines could result in death or serious injury:

• Make sure only qualified personnel perform the installation.

• Remove pressure and drain the pipe assembly prior to installing or removing the

orifice plate.

• If the process fluid is caustic or otherwise hazardous, follow the instruction closely

to prevent mishap.

Reference Manual

00809-0100-4828, Rev AA

October 2003

Rosemount 1595

2-2

LOCATION AND

ORIENTATION

The orifice plate electronics must be installed in the proper orientation relative

to the pipe and the fluid measured.

Horizontal Pipe

Installation

NOTE

The maximum acceptable temperature is –100 to 700 °F (-73 to 370 °C).

Gas in Horizontal Pipes

The electronics should be mounted above the pipe to ensure that condensate

does not collect on the transmitter sensing diaphragms. Orient the unit within

the 120°recommended zone as shown in Figure 2-1.

Figure 2-1. Gas in Horizontal

Pipes

Liquid or Steam in Horizontal Pipes

The electronics should be mounted below the pipe to ensure that gases do

not collect on the transmitter sensing diaphragms.

Figure 2-2. Steam in Horizontal

Pipes

30 degrees

Recommended Zone 120 degrees

30 degrees

Flow

Recommended Zone 120 degrees

Flow

Andere Handbücher für Rosemount 1595

Inhaltsverzeichnis

Andere Emerson Messgerät Handbücher

Emerson

Emerson ControlWave EFM Bedienungsanleitung

Emerson

Emerson Rosemount 6888A Bedienungsanleitung

Emerson

Emerson Rosemount Clarity II T56 Bedienungsanleitung

Emerson

Emerson 2130 RBM Consultant Pro Bedienungsanleitung

Emerson

Emerson Rosemount 5900S Series Bedienungsanleitung

Emerson

Emerson Rosemount 8732EM Bedienungsanleitung

Emerson

Emerson AL200 Bedienungsanleitung

Emerson

Emerson Micro Motion MVD Direct Connect Bedienungsanleitung

Emerson

Emerson CSI 2140 Bedienungsanleitung

Emerson

Emerson Fisher 4320 Konfigurationshandbuch

Emerson

Emerson Micro Motion GDM Bedienungsanleitung

Emerson

Emerson Rosemount 753R Bedienungsanleitung

Emerson

Emerson Fisher 4320 Bedienungsanleitung

Emerson

Emerson Micro Motion Viscomaster Bedienungsanleitung

Emerson

Emerson Rosemount WPG Bedienungsanleitung

Emerson

Emerson ControlWave Series Technisches Dokument

Emerson

Emerson Rosemount 3051 Bedienungsanleitung

Emerson

Emerson Rosemount Wireless Pressure Gauge Bedienungsanleitung

Emerson

Emerson ROSEMOUNT370XA Bedienungsanleitung

Emerson

Emerson ROSEMOUNT OCX8800C Bedienungsanleitung

Emerson

Emerson ENARDO ES-660-HF Bedienungsanleitung

Emerson

Emerson Fisher 4320 Bedienungsanleitung

Emerson

Emerson Rosemount MCL-220 Bedienungsanleitung

Emerson

Emerson Rosemount 928 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung