Emerson Nform And Interface Products Bedienungsanleitung

OpenComms™Nform And Interface Products

Adaptive Solutions For IT

Site Monitoring & Services

for Business-Critical Continuity

Maximizing Your Investment

Through Adaptive Monitoring

Obtaining the information needed to know about critical

support equipment for computer systems has never

been easier…or more cost-efficient.

What You Don’t Know

Can Hurt You

A small problem in a computer or

communications facility can quickly

escalate into a disaster. Knowing

what is happening with power

and cooling equipment can keep

that protective "envelope" at peak

operating efficiency, vital to

system reliability.

Only Liebert can offer full-scale

monitoring and control of these

critical support systems by

providing the ability to gather

operating information from each

piece of equipment and pull it

together in one central location.

Finding A Better Way To

Monitor The Evolving

Critical Space

Monitoring the critical space is

essential. The problem is, the

critical space has evolved and can

take on many shapes and sizes,

from the traditional centralized data

center, to the cutting-edge

distributed topologies of telecom,

wireless and retail operations.

Liebert's mission is to protect the

critical space, whether consolidated

in the data center or distributed

throughout the network — and

monitoring is an essential

component of any high-availability

solution.

Just as one model of UPS or air

conditioner cannot fulfill the

requirements of every application,

Liebert offers a suite of monitoring

products to meet the varying

requirements of the vast spectrum

of critical space applications.

From leak detection to discrete

monitoring, unattended orderly

computer shutdown to enterprise-

wide monitoring, Liebert offers

hardware and software solutions

that fit.

This full-scale monitoring

capability allows for consolidation

of all components of critical space

infrastructure into an organized,

logical, high-availability system.

And because different people need

to know different information

about your support equipment,

Liebert will provide the tools to

determine what specific data should

go where.

(a) 5%

(b) 4%

(d) 42%

(e) 26%

(a) Up to $50,000 per hour

(b) Over $50,000 per hour 4%

(d) $1,000 per hour 42%

(e) $10,000 per hour 26%

Source: Infonetics, Cio Magazine/June 15, 2000

Cost of Downtime

How much does and hour of downtime cost

your business?

Getting Critical Information

Into The Right Hands

Business runs on information.

That information, however, must be

managed and protected. Liebert

offers the tools to keep the people

on the front line — such as IT,

network, data center and facility

managers — informed as to the

status of their critical systems. By

utilizing a network infrastructure

approach to monitoring, Liebert

has the solutions that align a

customer's needs for real-time

knowledge and system flexibility

with critical system uptime and

capital allocation constraints.

This type of system can provide

the information you need to

manage your critical equipment,

giving you a variety of ways to

receive and manage this

data — through computers at

your site or even on the web via

standard browser software.

From the traditional centralized

data center to constantly evolving

distributed network topologies,

Liebert has the solutions that

provide just the right amount of

control, monitoring, and protection

for your critical space requirements.

The Importance Of Support

System Monitoring

The reliability of your computing

and communications systems is

a direct result of the reliability of the

power and environmental systems

that help maintain their proper

operation. That's why Liebert is so

firmly committed to providing

monitoring capability in our

products. No one knows more about

what it takes to collect and deliver

the vital information you need to

manage your critical support systems.

To protect your critical business systems, it is important that

we first understand how you and your customers utilize these

resources. Knowing how your network is used allows us to

design system protection that addresses your real world needs.

To maintain the high level of availability that users expect, your

monitoring system must be able to keep you up-to-date on

any changes in the condition of your network infrastructure.

Understanding The Needs

Of Your Business

Proper power protection and

environmental control is essential

for your network components:

■Printer servers

■Database servers

■File servers

■E-mail servers

■Web servers

■Routers

■Hubs

Your Network Has Many Points That

Must Be Protected

Your customers have

expectations of the level

of system availability you

can provide.

ACINPUTBATTERYUPSONBYPASS

UPStationGXT

ACINPUTBATTERYUPSONBYPASS

UPStationGXT

ACINPUTBATTERYUPSONBYPASS

UPStationGXT

ACINPUTBATTERYUPSONBYPASS

UPStationGXT

DC Power Systems

An overvoltage

condition in an

essential DC power

system causes an

alarm to sound.

Problem is, no one is

there to hear it.

Water Leaks

Your data cabling is lying in a

growing puddle of water under the

raised floor because of a plumbing

leak. It is just a matter of time before

that affects your operation. Who

knows how long it will take to track

down the cause of the problem.

Power Distribution

Several circuits are on the verge of

overload. If one of these breakers

trips, servers will crash.

Power Conditioning Units

A grounding problem in your power

conditioning system causes small

voltage disturbances. You may not

even realize there is corrupt data or

damage to other systems until bigger

problems occur months later.

UPS Systems

Yesterday the UPS failed its automatic

battery self test. Today the UPS failed to

carry the load during a momentary power

interruption, halting a critical process. The

problem isn’t the UPS or the weak battery.

The real problem is that you didn’t know

that the UPS failed a self-diagnostic test.

Environmental

HVAC Systems

High head pressure, compressor

short cycling, dirty filters,

pump or fan failure — these

are just a few of the problems

that can cause mission-critical

air conditioning systems and

other HVAC equipment to go

down and temperatures to

go up. One more problem?

Not knowing that these

troubles are developing

in the first place.

Surge Protection

Thank goodness you

installed that surge

protector. It has protected

your site through many

thunderstorms. Unfortunately

it self-destructed protecting

you from that last surge and

you don’t know that it needs to

be replaced.

Static Transfer

Switches

A transfer switch fails to

transfer when your primary

power feed goes down in

the middle of the night.

You won’t know about it,

though, until tomorrow

morning when there are no

sales reports, no e-mails and

certainly no one conducting

normal business.

Intrusion Alarm

The entrance of unauthorized

personnel into a remote

shelter is a big problem.

The real problem is that

the person who needs to

know this is happening is

unaware and possibly isn’t

in the same building –

or even the same state.

Generator Operation

The good news is your

emergency generator came

on-line during a power

failure last night and kept

things running for several

hours. The bad news is that

the fuel tank is now almost

empty - and no one realizes

it, leaving you unprotected

for the next outage.

When Systems Are Critical…

Monitoring Is Not An Option

UNDETECTED

UNNOTICED

UNRECORDED

UNREPORTED

UNSEEN

If you don't know what is happening

inside your critical facilities, the result

is unavailability

Liebert Offers A Full

Range Of Monitoring

And Control Solutions

What Do You

Need To Monitor?

No matter which Liebert products you

have...we have a way for you to monitor

performance. Liebert offers a full range

of monitoring and control solutions to

complement your Liebert UPS, power

conditioning, power distribution or

environmental control systems. Find

your Liebert products on this chart to

see which specific monitoring methods

are available. Once you know your

monitoring options, you can then select

the system that best fits your

specific needs based on the type and

depth of information required by

your organization.

OpenComms Network

Products Nform Interface

Single-Phase UPS

Liebert PowerSure PSI ■OCWeb

Liebert UPStation GXT ■ OCWeb

Liebert UPStation GXT 6 &10 kVA ■OCWeb

Liebert UpStation GXT 2U ■OCWeb

Liebert UPstation S ■Voyager

Liebert Nfinity ■OCWeb

Liebert NX ■OCWeb-LB

Three-Phase UPS

Small 3-Phase

Liebert UPStation S3 ■Voyager

Liebert Series 300 ■OCWeb-LB

Hiross HiNet ■OCWEB-300

Large 3-Phase

Liebert NPower ■OC-NIC

Liebert NPower 1+1 ■OC-NIC

Series 600 Single Module System (SMS) ■OCWEB-300

Hiross Hipulse Multi Module (MM) ■OC-NIC

Hiross Hipulse Single Module (SM) ■OC-NIC

Hiross Hipulse System cabinet (SC) ■OC-NIC

Hiross Series 7200 Multi Module (MM) ■OC-NIC

Hiross Series 7200 Single Module (SM) ■OC-NIC

Hiross Series 7200 System Cabinet (SC) ■OC-NIC

Power Conditioning & Distribution

Liebert FDC ■OC-NIC

Precision Power Center (post-1990) ■OC-NIC

Top Entry Precision Power Center (post-1990) ■OC-NIC

DataWave (post-1999) ■OC-NIC

Transfer Switches

Static Transfer Switch ■OC-NIC

Static Transfer Switch 2 ■OC-NIC

Precision Cooling

Liebert DS ■OCWeb-LBDS

Deluxe System/3 ■OC-NIC

Challenger 3000 ■OC-NIC

Industrial Cooling Series (ICS) ■OC-NIC

Himod LNA ■OC-NIC

Mini-Mate2 ■OC-NIC

Mini-Mate2 8-Ton ■OC-NIC

DataMate ■OC-NIC

Atlas C10 ■OC-NIC

Hiross Microface ■OC-NIC

Monitoring Panels

Remote Power Monitor Panel

(PMP) (post-1990) ■OC-NIC

OpenComms EM ■Built-In

SiteNet Integrator ■Built-In

DC Power - Emerson Energy Systems

NterpriseIP ■OCWEB

Candeo Product Line

Candeo IP ■Built-In

Candeo SP 24 ■Built-In

Candeo SP 48 ■Built-In

Candeo Access ■Built-In

EES DC Product Line

Actura ■Built-In

Monitoring And Control Through

Your Existing Network

Extending The Communication

Capabilities Of Your Liebert Equipment

For enhanced remote communications and control

of Liebert UPS and air conditioning units, the

OpenComms Web and OpenComms NIC cards will

deliver SNMP and web-management communications

capabilities. Each Liebert system equipped with an

OpenComms NIC or Web card takes full advantage

The OpenComms

Web Card provides

SNMP and web-

based management

to your UPS.

The OpenComms NIC Card

transforms Liebert units into

manageable nodes within your

Network, NMS and BMS systems.

Liebert DS Card provides

SNMP and web-based

management for Liebert DS.

On-line Demo Sites:

http://gxtwebdemo.liebert.com

http://npowerwebdemo.liebert.com

http://nfinitywebdemo.liebert.com

http://deluxeamwebdemo.liebert.com

http://nxwebdemo.liebert.com

■Network Based

■Scalable and Adaptable

■Graphical User Interface

■Information Whenever Needed

■Interface with Liebert Power

and Cooling Systems

■Multiple Web Browser Support

■No Third-Party Application

Required

OpenComms Interface Advantages

of your Ethernet network, allowing remote monitoring

from your computer desktop, network operations

center or wherever network access is permitted.

The OpenComms cards support 10 and 100 MBit

Ethernet network transmission speeds, which will be

auto-detected upon connection to the network. Plus,

these cards support in-the-field firmware updates,

which increases the value of your investment.

OPENCOMMS INTERFACE PRODUCTS

Liebert OpenComms™ EM

For event greater flexibility, the Liebert OpenComms

EM is designed to monitor temperature, humidity and

contact closures inside critical environments, including

racks and small computer rooms.

For applications that require the management of

power within the Network rack, the OpenComms EM

PDU option manages up to (2) two Liebert MP Advanced

Power Strips.

This compact device provides network connectivity

through Web access and/or E-Mail Notifications of

events for stand-alone applications.

The SNMP interface provides access to parameteric

data and notifications of alarm events to Liebert

OpenComms Nform Critical Management Software

and/or a Network Management System.

On-line Demo Sites:

http://mpwebdemo.liebert.com

http://emwebdemo.liebert.com

Managed Power Strips Provide Distribution,

Control, And Monitoring To Rack Applications

■Monitor Temperature and Humidity

in the Rack

■E-mail Notifications directly from

OpenComms EM

■Trending of Environmental and

Power data points

■Communicate and Monitor MP

Advanced Power Strips Via MP-S

Access Server

OpenComms EM Advantages

Interface With Most Critical Support Equipment

Liebert OpenComms Nform will monitor any Liebert

SNMP device that supports a network interface, such as

the OpenComms Web card and the OpenComms NIC

(network interface card). This will allow connection to

a full range of Liebert power and mission-critical cooling

systems and equipment from other manufacturers,

including DC power systems and other third party

SNMP-based products.

Connectivity to Liebert OpenComms Nform can

also be achieved with the Liebert OpenComms EM

network-enabled monitoring device. The unit provides

SNMP traps for use with Liebert OpenComms Nform.

The software can also be connected to the Liebert

MP-S Access Server which is used to communicate

with and monitor Liebert MP Advanced Power Strips.

Liebert

OpenComms™ EM

OPENCOMMS EM/MP ADVANCED POWER STRIPS

Liebert Shutdown Control:

Maximum Data Protection

MultiLink automated shutdown software allows you to actively protect data on servers supported by the Liebert UPS equipment

you are monitoring with OpenComms Nform, using the same OpenComms Web and OpenComms NIC cards.

MultiLink®Shutdown

Software

Because today’s critical business

applications are often distributed

over several computers, there

is a need for shutdown software

capable of protecting information

on multiple machines. The

shutdown notifications from

OpenComms Nform to MultiLink

1.5 clients perform the critical task

of protecting your computers

from costly damage and data loss

as a result of power failure and

environmental alarm conditions –

on anything from a single

workstation to a network of

workstations and servers.

Stay In Control

During an extended utility failure,

MultiLink warns computer users

of impending power loss and

automatically shuts down computer

operating systems in a smooth and

orderly manner if the UPS battery

capacity runs low.

OpenComms Nform 1.2

Server with Viewer

Ethernet

Liebert NX

Nform Client

(Viewer Only) MultiLink 1.5

Client

MultiLink 1.5

Client MultiLink 1.5

Client

UPS Load

■Automated and Orderly Shutdown

on Environmental, UPS and

Power conditions

■Scalable

■Network Based

■Suitable for Single Workstation or

Network of Servers

■Wide Operating System Capabilities

http://Multilink.liebert.com

MultiLink Advantages

MULTILINK SHUTDOWN SOFTWARE

On-line Demo Sites:

http://Nform.liebert.com

Liebert OpenComms Nform is a network

communications system that will

enable you to leverage the distributed

monitoring capabilities of your network

connected equipment.

When Systems Are Critical…

Monitoring Is Not An Option

OpenComms Nform software

solution combines full-scale

monitoring with cost-effective

deployment through the use of the

existing network infrastructure —

so the cost of dedicated, out-

of-band communications cabling is

eliminated. It is both scalable and

adaptable so it can grow as your

systems expand and needs change.

The software can be configured

to monitor your network for alarm

notifications from Liebert power

protection and precision cooling

equipment. These alarms, or

SNMP traps, can be received by

the software and processed to

trigger event actions such as

e-mail alerts or local notifications.

For ease of use, the OpenComms

Nform graphical user interface

enables you to view device status

conditions through either a native

SNMP interface or an HTML web

browser interface. The Alarm Log will

manage all alarms that are received

by OpenComms Nform.

OpenComms Nform will monitor

any Liebert SNMP devices that

support a network interface, such as

the OpenComms Web card and the

OpenComms NIC. The customizable

navigation tree provides the

flexibility to design an OpenComms

Nform user interface around your

network layout. Authenticated alarm

management and event notification

ensures that alarms are detected

and acted upon, which allows

problems to be quickly resolved.

Small

Mission-Critical

Air

Three-Phase UPSSingle-Phase

UPS

Network

Management

System

Nform

Server Nform Client

(Viewer Only)

Ethernet

NterpriseIP Battery

Monitoring

Large

Mission-Critical

Air

Rackmount

UPS

One Company, Providing

You a Complete High-

Availability Solution

Connecting to equipment in the

distributed critical space is only

part of the monitoring challenge.

Liebert OpenComms Nform

leverages the network connectivity

capabilities of your Liebert

equipment to provide a centralized

monitoring view of your distributed

equipment. Utilizing the SNMP and

Web technologies built into each of

the OpenComms communication

cards, OpenComms Nform will

centrally manage alarm notifications

to provide you with an easy interface

to access critical status information.

OpenComms Nform effectively

eliminates the need for expensive

third-party monitoring applications.

The Liebert "turn-key" approach to

communications and monitoring

minimizes your installation and

maintenance costs, consolidates

your view of the critical space

status, and maximizes your uptime

through automated notifications

of alarm conditions.

OpenComms Nform centralizes

the management of your distributed

Liebert network equipment.

■Alarm Management Features

■Connection to Other Manufacturers Equipment

■Turn Key Approach to Communications and Monitoring

■MultiLink Integration for Shutdown of systems

■Management of UPS, Power, Environmental and

Monitoring Products that support SNMP

■Centralized Management of critical systems

■Web Integration

OpenComms Nform Advantages

OPENCOMMS NFORM SOLUTIONS

Comprehensive Monitoring:

The OpenComms Nform Advantage

Device

Surveillance

The status of

managed equipment

propagates up through

the customized

navigation view.

Status at a Glance

Real-time device view of operation and

current alarms.

Web Integration

The web interface from managed devices is

integrated directly within the software.

Navigational Graphics

Incorporate graphic floor-plans or maps

that allow for quick equipment location

and hyper-links to managed equipment

that support a web interface.

SNMP Direct

Devices that do not support an embedded

web interface can be managed directly

through their native SNMP interfaces.

SNMP Configuration

View only the configurable SNMP data.

One button download allows for quick

configuration changes.

Dieses Handbuch passt für folgende Modelle

Andere Emerson Netzwerk-Hardware Handbücher

Emerson

Emerson PACSystems IPC 2010 Kurzanleitung

Emerson

Emerson NXL 400 Bedienungsanleitung

Emerson

Emerson SITETPI-E V3 Bedienungsanleitung

Emerson

Emerson Liebert SiteLink-12 Bedienungsanleitung

Emerson

Emerson STXPBS001 Bedienungsanleitung

Emerson

Emerson Liebert SiteLink-4 Bedienungsanleitung

Emerson

Emerson PACSystems VersaPoint Benutzerhandbuch

Emerson

Emerson ATCA-F140 Kurzanleitung

Emerson

Emerson PACSystems RX3i Bedienungsanleitung

Emerson

Emerson SI-EtherCAT Bedienungsanleitung

Emerson

Emerson Liebert IntelliSlot Unity-DP Bedienungsanleitung

Emerson

Emerson AXP 1410 Kurzanleitung

Emerson

Emerson Bristol Helicoid Gauges Bedienungs- und Sicherheitshinweise

Emerson

Emerson SiteI/O 10/0 Bedienungsanleitung

Emerson

Emerson SiteLink-12E Montageanleitung

Emerson

Emerson ControlWave Remote Ethernet I/O Bedienungsanleitung

Emerson

Emerson dixell Bedienungsanleitung

Emerson

Emerson Centellis 2000 Kurzanleitung

Emerson

Emerson AXP1620 Kurzanleitung

Emerson

Emerson ACC/ARTM-7221/SCSI Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung