Emerson Rosemount 2521 Series Bedienungsanleitung

Quick Start Guide

00825-0100-2521, Rev AA

October 2019

Rosemount™ 2521 Solids Level Switch

Vibrating Fork

Contents

Introduction.................................................................................................................................3

Mechanical installation.................................................................................................................9

Electrical installation.................................................................................................................. 14

Configuration.............................................................................................................................18

Operation...................................................................................................................................21

Maintenance.............................................................................................................................. 22

Product certifications................................................................................................................. 24

Quick Start Guide October 2019

2 Quick Start Guide

1 Introduction

The level switch detects the presence and absence of a process media at its

installation point, and reports it as a switched electrical output.

Note

Other language versions of this Quick Start Guide can be found at

Emerson.com/Rosemount.

1.1 Safety messages

NOTICE

Read this manual before working with the product. For personal and system

safety, and for optimum product performance, ensure you thoroughly

understand the contents before installing, using, or maintaining this

product.

For technical assistance, contacts are listed below:

Customer Central

Technical support, quoting, and order-related questions.

•United States - 1-800-999-9307 (7:00 am to 7:00 pm CST)

•Asia Pacific- 65 777 8211

North American Response Center

Equipment service needs.

•1-800-654-7768 (24 hours a day — includes Canada)

•Outside of these areas, contact your local Emerson representative.

WARNING

Physical access

Unauthorized personnel may potentially cause significant damage to and/or

misconfiguration of end users’ equipment. This could be intentional or

unintentional and needs to be protected against.

Physical security is an important part of any security program and

fundamental to protecting your system. Restrict physical access by

unauthorized personnel to protect end users’ assets. This is true for all

systems used within the facility.

October 2019 Quick Start Guide

Quick Start Guide 3

WARNING

Failure to follow safe installation and servicing guidelines could result in

death or serious injury.

•Ensure the level switch is installed by qualified personnel and in

accordance with applicable code of practice.

•Use the level switch only as specified in this manual. Failure to do so may

impair the protection provided by the level switch.

Explosions could result in death or serious injury.

•The level switch must only be installed and operated in non-hazardous

(ordinary) locations.

Electrical shock could cause death or serious injury.

•Avoid contact with the leads and terminals. High voltage that may be

present on leads can cause electrical shock.

•Ensure the power to the level switch is off, and the lines to any other

external power source are disconnected or not powered while wiring the

level switch.

•Ensure the wiring is suitable for the electrical current and the insulation is

suitable for the voltage, temperature, and environment.

Process leaks could result in death or serious injury.

•Ensure the level switch is handled carefully. If the process seal is

damaged, gas or dust might escape from the silo (or other vessel)

Any substitution of non-recognized parts may jeopardize safety. Repair,

e.g. substitution of components, etc. may also jeopardize safety and is

under no circumstances allowed.

•Unauthorized changes to the product are strictly prohibited as they may

unintentionally and unpredictably alter performance and jeopardize

safety. Unauthorized changes that interfere with the integrity of the

welds or flanges, such as making additional perforations, compromise

product integrity and safety. Equipment ratings and certifications are no

longer valid on any products that have been damaged or modified

without the prior written permission of Emerson. Any continued use of

product that has been damaged or modified without the written

authorization is at the customer’s sole risk and expense.

Quick Start Guide October 2019

4 Quick Start Guide

CAUTION

The products described in this document are NOT designed for nuclear-

qualified applications.

•Using non-nuclear qualified products in applications that require

nuclear-qualified hardware or products may cause inaccurate readings.

•For information on Rosemount nuclear-qualified products, contact your

local Emerson Sales Representative.

Individuals who handle products exposed to a hazardous substance can

avoid injury if they are informed of and understand the hazard.

•If the product being returned was exposed to a hazardous substance as

defined by Occupational Safety and Health Administration (OSHA), a

copy of the required Safety Data Sheet (SDS) for each hazardous

substance identified must be included with the returned level switch.

1.2 Applications

A Rosemount™ 2521 Solids Level Switch is used for monitoring the level of

bulk materials in all types of containers and silos.

The level switch can be used with all powdery and granulated bulk materials

that do not show a strong tendency to form crusts or deposits. The

detection of solids in a liquid is also possible

Typical applications are:

•Building materials

—Lime, extruded polystyrene foam (XPS), molding sand, etc.

•Food and beverage

—Milk powder, flour, salt, etc.

•Plastics

—Plastic granulates, etc.

•Timber

•Chemicals

The level switch has a threaded, flanged, or Tri Clamp process connection for

mounting it onto a silo (or other vessel). You can mount it on a side wall of

the silo, so that it is level with the filling limit to be monitored. Alternatively,

if it has an extended length, mount it vertically on top of a silo to monitor the

maximum filling limit.

The length of the fork can be up to 157.5 in. (4 m) with an extension tube.

October 2019 Quick Start Guide

Quick Start Guide 5

The use of a sliding sleeve is recommended so that the switching point can

be changed easily during the live operation of the level switch.

Figure 1-1: Typical Installation Examples

A. Rosemount 2521 with the cable-extended fork length

B. Rosemount 2521 with the tube-extended fork length and thermal tube-

extension

C. Rosemount 2521 with the standard length fork

D. Optional sliding sleeve

Quick Start Guide October 2019

6 Quick Start Guide

Figure 1-2: Detection of solids in water

A. Rosemount 2521 with the tube-extended fork length and thermal tube-

extension

B. Rosemount 2521 with the standard length fork

C. Optional sliding sleeve

D. Solids in water

1.3 Measurement principles

Using the principle of a tuning fork, a piezo-electric crystal oscillates the

forks at their natural frequency. Changes to the oscillation frequency are

continuously monitored by electronics which varies depending on whether

the fork is covered or uncovered by a solids medium.

When the solids medium in the vessel (silo) falls away from the fork, it causes

a change of oscillation frequency that is detected by the electronics and the

output switches to indicate an 'uncovered' state.

October 2019 Quick Start Guide

Quick Start Guide 7

When the solids medium in the vessel (silo) rises and covers the fork, it

causes a change of oscillation frequency that is detected by the electronics

and the output switches to indicate a 'covered' state.

The electrical output will vary depending on the electronics selected when

the Rosemount 2521 was ordered.

Quick Start Guide October 2019

8 Quick Start Guide

2 Mechanical installation

2.1 Mounting considerations

Before mounting the level switch on a silo (or other vessel), review the safety

and pre-mounting sections.

2.1.1 Safety

General safety

1. Installation of this equipment shall be carried out by suitably trained

personnel, in accordance with the applicable code of practice.

2. If equipment is likely to come into contact with aggressive

substances, it is the user’s responsibility to take suitable precautions

that prevent it from being adversely affected, thus ensuring the type

of protection is not compromised.

a. Aggressive substances: e.g. acidic liquids or gases that may

attack metals or solvents that may affect polymeric materials.

b. Suitable precautions: e.g. regular checks as part of routine

inspections or establishing from a material's data sheet that it

is resistant to specific chemicals.

3. It is the responsibility of the installer to:

a. Take protective measures, such as fitting an angled shield

(reverse V shape) to the silo or selecting an extension tube

option, when there are high mechanical forces.

b. Ensure that the process connection is tightened by the

correct amount of torque and sealed to prevent process

leaks.

4. Technical data

a. The Rosemount 2521 Product Data Sheet has all the technical

specifications. See Emerson.com/Rosemount for other

language versions.

October 2019 Quick Start Guide

Quick Start Guide 9

2.1.2 Solids in Water

The detection of solids in water is supported by the Rosemount 2521S only.

An installation example can be seen in Figure 1-2.

2.1.3 Mechanical load

The load at the mounting point must not exceed 300 Nm (Rosemount 2521

with an extended length fork).

Figure 2-1: Maximum Mechanical Load

A. Mounting point

B. Mechanical load

2.1.4 Vertical installations

Table 2-1 provides the maximum fork lengths and the corresponding

maximum deviations from a normal vertical installation.

Table 2-1: Maximum Vertical Deviation

Maximum deviation Maximum fork length

5° 157.5 in. (4000 mm)

45° 47.24 in. (1200 mm)

> 45° 23.62 in. (600 mm)

Quick Start Guide October 2019

10 Quick Start Guide

Andere Handbücher für Rosemount 2521 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Emerson Schalten Handbücher

Emerson

Emerson DWM COPELAND OPS2 Handbuch

Emerson

Emerson mobrey squing 2 Bedienungsanleitung

Emerson

Emerson ASCO 3ATS Bedienungsanleitung

Emerson

Emerson Rosemount 2110 Bedienungsanleitung

Emerson

Emerson MVME4100ET Bedienungsanleitung

Emerson

Emerson TARTARINI V/31-2-AP-E Series Bedienungsanleitung

Emerson

Emerson Rosemount 2130 Bedienungsanleitung

Emerson

Emerson Rosemount 2460 Bedienungsanleitung

Emerson

Emerson PACSystems SLM042 Bedienungsanleitung

Emerson

Emerson Rosemount 2120 Bedienungsanleitung

Emerson

Emerson Rosemount 2410 Konfigurationshandbuch

Emerson

Emerson Rosemount 2130 Bedienungsanleitung

Emerson

Emerson Rosemount 2460 Bedienungsanleitung

Emerson

Emerson AVOCENT Bedienungsanleitung

Emerson

Emerson 80 Series GO Switch Bedienungsanleitung

Emerson

Emerson AVENTICS PM1 Bedienungsanleitung

Emerson

Emerson Rosemount 585 Annubar Bedienungsanleitung

Emerson

Emerson Alco Controls PS1 Series Bedienungsanleitung

Emerson

Emerson Rosemount 2501 Bedienungsanleitung

Emerson

Emerson Cybex SC KM 140 Bedienungsanleitung

Emerson

Emerson Rosemount 2460 Bedienungsanleitung

Emerson

Emerson Rosemount 2120 Bedienungsanleitung

Emerson

Emerson Rosemount 2160 Bedienungsanleitung

Emerson

Emerson SmartSwitch Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch