Emerson 1F94-80 Bedienungsanleitung

OPERATION GUIDE

7 Day Multi-stage/Heat Pump

Electronic Digital Thermostat

1F94-80

WHITE-RODGERS

Operator: Save this booklet for future use!

W H I T E - R O D G E R S

DIGITAL COMFORT SET II

Pleasereadthismanualthoroughlybeforeoperatingorprogrammingyourthermostat. Ifyouhave

questions, you may write to our Technical Service Department at the address shown on the back

cover of this booklet.

About Your New Thermostat . . .

Your new Digital COMFORT SET II Multi-stage/Heat Pump Thermostat uses the technology of a

solid-state microcomputer to provide precise time/temperature control. The COMFORT SET II

Thermostat offers you the flexibility to design heating and cooling programs that fit your needs.

PROGRAMMING YOUR

THERMOSTAT ................................... 19

PLANNING FOR YOUR NEEDS

ENTERING YOUR PROGRAM

Set Current Time and Day

Program Heating/Cooling

Temperatures

Enter Heating Program

Enter Cooling Program

Using the HOLD/COPY Button

CHECK YOUR PROGRAMMING

QUESTIONS AND ANSWERS................ 34

YOUR NEW THERMOSTAT'S

FEATURES ........................................... 4

OPERATING YOUR THERMOSTAT ........ 5

PARTS OF THE THERMOSTAT

The Back Of the Thermostat Body

The Display

The Thermostat Buttons

OPERATING FEATURES

In This Guide . . .

Operator: Save this

booklet for future use!

• Computed Energy Management Recovery

(EMR)

• Automaticchangeover(operator-selectable)

• Separate setback programming for 7 inde-

pendent days

• Simultaneous heat and cool program stor-

age

• Twoseparatetime/temperaturesettingsper

24-hour period (occupied and unoccupied)

• Armchair programming capability

• Up to 2 stages of heat and up to 2 stages of

cool

• Dampercontrolandprogrammablefanwhen

the occupied temperature is selected

• Backlit LCD displays continuous set point,

time, and room temperature

• 9 volt Energizer®alkaline battery backup

• Preprogrammed temperature control

• Adjustable cycle times

• Compressor short cycle protection

• Blower delay in the cooling cycle

• Audio and visual prompting during opera-

tion

• Two hour temperature override

• Manual program override (HOLD tempera-

ture)

•°F/°C convertibility

• Keypad lockout (operator-selectable)

• Temperature range 40°to 99°F

• Compatible with Remote Sensor (installer-

selectable)

YOUR NEW THERMOSTAT’S FEATURES

OPERATING YOUR THERMOSTAT

Thesubbaseisattachedtothewall,butyoucan

remove the thermostat body for easy program-

ming. To remove the thermostat body from the

subbase, grasp the thermostat body and gently

pull it out from the bottom of the subbase and

pivot up. To attach the thermostat body, line up

thefourterminalpinsontheuppersectionofthe

thermostatbackwiththematchingconnectoron

the subbase. Insert these, then gently pivot the

thermostat body down to connect the nine pin

connectors on the lower portion of the thermo-

statback.Gentlypushuntilthesnapconnectors

engage.DONOTFORCEORPRYTHETHER-

MOSTAT as this may damage the unit.

Before you begin programming your thermo-

stat,youshouldbefamiliarwithitsfeaturesand

with the display and the location and operation

of the thermostat buttons. The information in

this section will help you become familiar with

your new thermostat so that you can easily

program it.

Your thermostat consists of two parts: the ther-

mostat body and the subbase.

Use

SYSTEM

SWITCH

to turn thermostat to OFF

mode before removing or attaching the

thermostat body. Equipment damage

and/or personal injury could occur.

CAUTION

PARTS OF THE THERMOSTAT

The Back of The Thermostat Body

Turnthe thermostat body over. On the backare

the 9 volt Energizer®alkaline battery and the

option switches.

1. The 9 volt Energizer®alkaline battery pro-

vides power to the thermostat when the

24VAC power is interrupted (for example,

when you remove the thermostat from the

wall for programming). A fresh battery will

maintain the stored program for approxi-

matelyaweek. Ifpowerlossislong enough

fortheprogramtobelost,thethermostatwill

automatically return to the factory pro-

grammed temperatures (64°F heating and

82°F cooling) when power is restored. You

BACK OF THERMOSTAT BODY

Option switches 9-pin connector

4-pin connector Battery

W18

must reprogram the thermostat if this hap-

pens.

If the word BATTERY is flashing in the

displaywindow,thebatteryislowandshould

be replaced with a fresh 9 volt Energizer®

alkaline battery. The battery will provide

power for all functions except the display

light, which works only on 24VAC power.

Use

SYSTEM

SWITCH to turn thermostat to OFF

mode before removing thermostat from

the wall to replace the battery.

2. You may adjust the option switches for

energymanagementrecoveryandtotalkey-

pad lockout (see OPERATING FEA-

TURES).

CAUTION

Other than and , the buttons are

locatedbehindthethermostatdoor.Toopenthe

door,useyourfingernailintheindentationatthe

top center of the door. Pull the door out, then

swing the door down on its hinges.

Following are brief descriptions of the display

and the thermostat buttons.

FAN AUTO is displayed during automatic

fan operation (when the blower cycles with

theheatingorcoolingsystem).PRGFANis

displayed when the fan has been pro-

grammed to run continuously during the

occupied program period.

The word BATTERY flashes on the display

when the 9 volt alkaline battery power is

weak and should be replaced.

The Display

Continuouslydisplayssystemmode(HEAT,

EMER, OFF, COOL, AUTO, HLD). During

programming, the day of the week and the

period (occupied or unoccupied) are dis-

played (MO O, TU O, WE U, etc.).

Alternately displays room temperature (F

denotesdegreesFahrenheitandCdenotes

degrees Celsius) and time of day (Ade-

notes AM time and Pdenotes PM time).

Duringprogramming,when

VIEW

TEMP

ispressed,

the heating or cooling mode and period

currently being programmed are displayed

(HEAT O, COOL U, etc.)

Displays the setpoint temperature (this dis-

play is blank in the AUTO mode).

SYSTEM

SWITCH

FAN

SWITCH

HEAT-EMER-OFF-COOL-AUTO

ON-AUTO

TIME

FWD

TIME

BACK

SET

CLOCK

ADV

DAY

VIEW

PRGM

VIEW

TEMP

HOLD

COPY

RUN

PRGM

SEVEN DAY DIGITAL COMFORT-SET

W H I T E - R O D G E R S

1 2 3

BATTERY

PRG FAN

EMER. PUMP

MALF. AUX.

FAN AUTOPRG FAN

Usedwith and toselectsetpoint

temperatures.

Used to manually override programming to

holdataselectedtemperature(whenHOLD

is displayed). Also used to copy one day’s

programming to another day (when COPY

is displayed).

Used to start program operation after pro-

gramming.Alsousedtoreturnthermostatto

program operation after being in HOLD

mode.

(Red arrow) Raises temperature setting

(99°F or 37°C maximum).

(Blue arrow) Lowers temperature setting

(40°F or 4°C minimum).

EMER light indicates that the system is in

the emergency mode (the heat pump com-

pressor is off and the auxiliary heat system

is maintaining the setpoint temperature).

The Thermostat Buttons

Sets the system mode (HEATing, OFF,

COOLing, or AUTOmatic changeover).

Selects fan operation (see #4, above).

Runs display forward or backward through

time, day, or anticipation settings during

programming.

Usedwith

TIME

FWD

and

TIME

BACK

toset current time

and day of the week.

Used during programming to set the day of

the week to be programmed.

Usedtoinitiateorreviewprogramming(pro-

gram viewing automatically begins with

Monday’sprogram;use

ADV

DAY

buttontoview

programming for following days).

Inhaltsverzeichnis

Andere Emerson Thermostat Handbücher

Emerson

Emerson 1E78-151 Bedienungsanleitung

Emerson

Emerson 7903 Betriebsanleitung

Emerson

Emerson 1F83C-11NP Bedienungsanleitung

Emerson

Emerson White Rodgers 1H11G-101 Bedienungsanleitung

Emerson

Emerson Inspire 1HDEZ-1521 Bedienungsanleitung

Emerson

Emerson VERDANT VX Series Bedienungsanleitung

Emerson

Emerson White-Rodgers 1F75H-21PR Bedienungsanleitung

Emerson

Emerson SENSI TOUCH 2 1F96U-42WF Series Bedienungsanleitung

Emerson

Emerson 99 Bedienungsanleitung

Emerson

Emerson 80 Series Bedienungsanleitung

Emerson

Emerson White Rodgers 755-50 Bedienungsanleitung

Emerson

Emerson Sensi 1F87U-42WF Bedienungsanleitung

Emerson

Emerson 1F89EZ-0251 Betriebsanleitung

Emerson

Emerson Sensi Touch Bedienungsanleitung

Emerson

Emerson EE542-1Z Bedienungsanleitung

Emerson

Emerson Delwarva Power Web-Programmable Thermostat Bedienungsanleitung

Emerson

Emerson 1F85U-42NP Bedienungsanleitung

Emerson

Emerson 1F85U-42PR Bedienungsanleitung

Emerson

Emerson MICROTEMP MTN-1991H Bedienungsanleitung

Emerson

Emerson Easyheat Warm Tiles Produkthandbuch

Emerson

Emerson 810-1600 Bedienungsanleitung

Emerson

Emerson XW10L Bedienungsanleitung

Emerson

Emerson White-Rodgers 1F75H-21NP Bedienungsanleitung

Emerson

Emerson Alco Controls TS1 Series Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Honeywell

Honeywell CM721 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

Honeywell

Honeywell RLV4305 Bedienungsanleitung

Honeywell

Honeywell Prestige 2.0 THX9421 Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung

Honeywell

Honeywell T6811 Bedienungsanleitung