Emerson Rosemount 3051 Bedienungsanleitung

Quick Start Guide

00825-0100-5007, Rev DE

August2023

Rosemount™ 3051 Pressure

Transmitter

Contents

About this guide .......................................................................................................................... 3

System readiness......................................................................................................................... 5

Transmitter installation...............................................................................................................7

Safety instrumented systems installation...............................................................................23

Product certifications................................................................................................................ 24

Quick Start Guide August2023

2 Rosemount 3051

1 About this guide

This guide provides basic guidelines for Rosemount 3051 Pressure

Transmitters. It does not provide instructions for configuration,

diagnostics, maintenance, service, troubleshooting, Explosion-proof,

Flameproof, or Intrinsically Safe (IS) installations. Refer to the

Rosemount 3051 Manual for more instructions. This guide is also

available electronically at Emerson.com.

1.1 Safety messages

WARNING

Explosions

Explosions could result in death or serious injury.

Installation of device in an explosive environment must be in

accordance with appropriate local, national, and international

standards, codes, and practices. Review the approvals section of

the Rosemount 3051 Manual for any restrictions associated with a

safe installation.

In an explosionproof/flameproof installation, do not remove the

transmitter covers when power is applied to the transmitter.

WARNING

Process leaks

Process leaks may cause harm or result in death.

To avoid process leaks, only use the O-ring designed to seal with the

corresponding flange adapter.

WARNING

Electrical shock

Electrical shock can result in death or serious injury.

Avoid contact with the leads and terminals. High voltage that may be

present on leads can cause electrical shock.

August2023 Quick Start Guide

Quick Start Guide 3

WARNING

Conduit/cable entries

Unless otherwise marked, the conduit/cable entries in the

housing enclosure use a ½–14 NPT form. Only use plugs,

adapters, glands, or conduit with a compatible thread form when

closing these entries.

Entries marked M20 are M20 x 1.5 thread form. On devices with

multiple conduit entries, all entries will have the same thread

form.

When installing in a hazardous location, use only appropriately

listed or Ex certified plugs, glands, or adapters in cable/conduit

entries.

WARNING

Physical access

Unauthorized personnel may potentially cause significant damage to

and/or misconfiguration of end users’ equipment. This could be

intentional or unintentional and needs to be protected against.

Physical security is an important part of any security program and

fundamental in protecting your system. Restrict physical access by

unauthorized personnel to protect end users’ assets. This is true for

all systems used within the facility.

Quick Start Guide August2023

4 Rosemount 3051

2 System readiness

Confirm HART® revision capability

•If using HART-based control or asset management systems,

confirm the HART capability of those systems prior to transmitter

installation. Not all systems are capable of communicating with

HART Revision 7. You can configure this transmitter for either

HART Revision 5 or 7.

•For instructions on how to change the HART revision of your

transmitter, see Switch HART® revision mode.

2.1 Confirm correct device driver

•Verify the latest device driver (DD/DTM™) is loaded on your

systems to ensure proper communications.

•Download the latest device driver from Emerson.com or

Fieldcommgroup.org.

Rosemount 3051 device revisions and drivers

Table 2-1 provides the information necessary to ensure you have the

correct device driver and documentation for your device.

Table 2-1: Rosemount 3051 with 4-20 mA HART® protocol device revisions

and files

Release

date

Device identification Device driver

identification

Review

instruc-

tions

Review

function

ality

NAMUR

hard-

ware

revision

(1)

(1) HART

soft-

ware

revision

(2)

HART

univer-

sal

revision

Device

revision

(3)

Rose-

mount

2088,

2090P,

and

2090F

pres-

sure

trans-

mitters

Change

descrip-

tion

Aug-16 1.1.xx 1.0.xx 3 7 10 with

HART

and 1–5

Vdc Low

Power

Protocol

Refer-

ence

Manual

(4)

5 9

Jan-13 N/A 1.0.xx 1 7 10 (5)

5 9

August2023 Quick Start Guide

Quick Start Guide 5

Table 2-1: Rosemount 3051 with 4-20 mA HART® protocol device revisions

and files

(continued)

Release

date

Device identification Device driver

identification

Review

instruc-

tions

Review

function

ality

NAMUR

hard-

ware

revision

(1)

(1) HART

soft-

ware

revision

(2)

HART

univer-

sal

revision

Device

revision

(3)

Rose-

mount

2088,

2090P,

and

2090F

pres-

sure

trans-

mitters

Change

descrip-

tion

Jan-98 N/A N/A 178 5 3 

with 4–

20 mA

HART

and 1–5

Vdc Low

Power

Protocol

Refer-

ence

Manual

N/A

(1) NAMUR revision is located on the hardware tag of the device. Differences in level

3 changes, signified above by xx, represent minor product changes as defined

per NE53. Compatibility and functionality are preserved and product can be used

interchangeably.

(2) HART software revision can be read using a HART capable configuration tool. Value

shown is minimum revision that could correspond to NAMUR revisions.

(3) Device driver file names use Device and DD Revision, (such as 10_01). HART protocol

is designed to enable legacy device driver revisions to continue to communicate

with new HART devices. To access new functionality, download the new device

driver. Emerson recommends downloading new device driver files to ensure full

functionality.

(4) HART revision 5 and 7 selectable, Local Operator Interface (LOI), scaled variable,

configurable alarms, and expanded engineering units.

(5) Rosemount 3051G Pressure Transmitter updated electronics hardware design.

Intrinsic Safety temperature classification change.

Quick Start Guide August2023

6 Rosemount 3051

3 Transmitter installation

3.1 Mounting the transmitter

3.1.1 Mount the transmitter in liquid applications

Procedure

1. Place taps to the side of the line.

2. Note

When mount the transmitter, verify the drain/vent valves are

oriented upward.

Mount the transmitter beside or below the taps.

Figure 3-1: Coplanar and in-line liquid applications

Coplanar In-line

Flow

August2023 Quick Start Guide

Quick Start Guide 7

3.1.2 Mount the transmitter in gas applications

Procedure

1. Place taps in the top or side of the line.

2. Mount the transmitter beside or above the taps.

Figure 3-2: Coplanar and in-line gas applications

Coplanar In-line

Flow

Quick Start Guide August2023

8 Rosemount 3051

3.1.3 Mount the transmitter in steam applications

Procedure

1. Place taps to the side of the line.

2. Mount the transmitter beside or below the taps.

3. Fill impulse lines with water.

Figure 3-3: Coplanar and in-line steam applications

Coplanar In-line

Flow

August2023 Quick Start Guide

Quick Start Guide 9

Figure 3-4: Panel and pipe mounting

A. Panel mount (5/6 x 1½ panel bolts are customer supplied

B. Coplanar flange

C. Pipe mount

D. Traditional flange

3.1.4 Assemble the transmitter

If the transmitter installation requires assembly of the process

flanges, manifolds, or flange adapters, follow the assembly

guidelines to ensure a tight seal for optimal performance. Use only

bolts supplied with the transmitter or sold by Emerson as spare

parts. Figure 3-5 illustrates common transmitter assemblies with the

required bolt lengths.

Quick Start Guide August2023

10 Rosemount 3051

Andere Handbücher für Rosemount 3051

Inhaltsverzeichnis

Andere Emerson Sender Handbücher

Emerson

Emerson Rosemount 3051N Bedienungsanleitung

Emerson

Emerson Rosemount 648 Bedienungsanleitung

Emerson

Emerson Rosemount 702 Bedienungsanleitung

Emerson

Emerson Rosemount 1408A Bedienungsanleitung

Emerson

Emerson Rosemount 5408 Bedienungsanleitung

Emerson

Emerson Rosemount 2051 Wireless Series Bedienungsanleitung

Emerson

Emerson Rosemount 705 Bedienungsanleitung

Emerson

Emerson Micro Motion 5700 Kurzanleitung

Emerson

Emerson MICRO MOTION 2700 Bedienungsanleitung

Emerson

Emerson Micro Motion 5700 Bedienungsanleitung

Emerson

Emerson Rosemount 8750W Bedienungsanleitung

Emerson

Emerson Rosemount 702 Bedienungsanleitung

Emerson

Emerson Rosemount 2090 Konfigurationshandbuch

Emerson

Emerson Liebert SL-31080 Bedienungsanleitung

Emerson

Emerson Rosemount 644 with HART Protocol Bedienungsanleitung

Emerson

Emerson Rosemount 644 Bedienungsanleitung

Emerson

Emerson MICRO MOTION 2700 Kurzanleitung

Emerson

Emerson Rosemount 2051 Wireless Series Bedienungsanleitung

Emerson

Emerson Rosemount 3051 CF Series Bedienungsanleitung

Emerson

Emerson Rosemount 644 FOUNDATION Bedienungsanleitung

Emerson

Emerson Rosemount MultiVariable 3051SMV Bedienungsanleitung

Emerson

Emerson PENBERTHY MGT-362 Handbuch

Emerson

Emerson Rosemount 702 Bedienungsanleitung

Emerson

Emerson Rosemount 3051 Bedienungsanleitung

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung