EMR BDAMON02-NFPA72 Bedienungsanleitung

BDAMON02-NFPA72

Bi-Directional Power Amplifier Monitor

EMR CORPORATION

17431 N. 25th Avenue - Phoenix, Arizona 85023

Phone: (623) 581-2875 - Toll Free: (800) 796-2875 - Fax: (623) 582-9499

info@emrcorp.com – www.emrcorp.com

USERS MANUAL

Rev. 6

USERS MANUAL

Rev. 6

Table of Contents

BDAMON02-SNMP Manual – Rev. 6

BDAMON02-NFPA72

Introduction and Features

Physical Connectivity

Web Interface Access

Viewing Current Readings & Alarms

Logging In

Alarm Setup

Resetting Alarms

IP Setup Menu

Network Connection Details

DHCP Server Setup

Static IP Address Setup

DNS Server Setup

Static DNS Server Setup

Email Setup

Date & Time

Miscellaneous Setup

Setting Unit Name(s)

Home Page Refresh Rate

Password Reset

SNMP Trap Setup

Obtaining the MIB File

Resetting to Factory Defaults

Appendix

...........................................................1

................................................................2

...............................................................3

.................................................3

...........................................................................3

.........................................................................4

....................................................................4

......................................................................5

.........................................................5

.................................................................5

.............................................................5

..................................................................6

............................................................6

.........................................................................6

........................................................................7

................................................................7

...........................................................7

....................................................................8

..................................................................8

................................................................8

.........................................................8

...........................................................................9

BDAMON02-NFPA72 USERS MANUAL

BDAMON02-NFPA72 Manual

Introduction

The EMR BDA Monitor (Model #BDAMON02-NFPA72) is a microprocessor-controlled unit

capable of monitoring the Primary AC, Power Supply/Battery DC Voltage, and the DC

Current for up to four RF amplifiers used in any EMR Signal Enhancement System. BDA

monitoring features vary depending on the relevant hardware configuration. This

documentation covers features and settings which are common to most users.

Product Features:

 Monitoring for up to four RF Power Amplifiers

 Web access

 Door Alarm

 AC Alarm

 Power Supply Alarm

 LED Status Indicators

 IP/DNS configuration

 Email Notification for up to five addresses

 SNMP Trap

EMR Model # 850622 with BDAMON02-NFPA72

2BDAMON02-NPA72 Manual

BDAMON02-NFPA72 USERS MANUAL

Physical Connectivity

The BDAMON02-NFPA72 is available as a pre-installed component of an EMR Bi-Directional

Amplifier (BDA) system. When the BDA system is plugged into a reliable power source the

power indicators on the monitor unit will light/glow.

The door alarm switch triggers an audible and LED alarm as the door opens. The time of

opening is recorded and a notification message sent to configured email/SNMP Trap. The

alarm must be reset from the web interface or reset button on the front of the monitoring unit

before the door is closed and the hysteresis period has lapsed.

Connect an ethernet cable to the ethernet port located at the base of the BDA enclosure.

The ethernet cable travels through the port at the base of the BDA enclosure and connects to

the monitoring unit.

Power Amplifier #1

Amplifier Connections

Power Amplifier #2

Door Alarm Switch

Ethernet Port

Alarm Reset Button

BDAMON02-NFPA72 USERS MANUAL

BDAMON02-NFPA72 Manual

Web Interface Access

With the ethernet cable connected and network connection established, navigate to the

default IP address to access the web interface. The BDAMON02-NFPA72 is configured and

controlled via web browser.

The default IP address to access the web interface is: http://192.168.3.250

Logging In

A user must be logged in to access the web interface. When prompted enter the username

and password. The default login username is admin with the password admin (see page

8, Password Resetto change this setting).

Viewing Current Readings and Alarms

The home page provides a snapshot of all current readouts and alarm statuses.

The home page will refresh automatically approximately every 10-15 seconds.

Select Clear Alarm(s) button to reset the alarm statuses (must be logged in). The reset

button on the front of the unit also resets the alarm statuses.

4BDAMON02-NPA72 Manual

BDAMON02-NFPA72 USERS MANUAL

Alarm Setup

The Alarm Setup page allows configuration of alarms for all available amplifier and power

values. This section also determines which alarms and readings appear on the home page.

Configurable Alarms:

 Door

 Power Supply

 AC

 Amplifiers – Up to 4

Note: Amplifier High/Low limit settings are preconfigured for the system. Consult the

manufacturer first before adjusting these settings!

Resetting Alarms:

Alarms can be reset via the web page or the Reset button on the front panel of the monitoring

unit. The reset procedure will clear active alarms.

The Hysteresisfield determines how long a failed condition persists before the alarm is

tripped.

BDAMON02-NFPA72 USERS MANUAL

BDAMON02-NFPA72 Manual

IP Setup Menu

The IP Setup menu allows configuration of network settings including IP, DNS, Email and

Date & Time settings.

Network Connection Details

This section provides a readout of all basic Network Connection settings.

DHCP Server Setup

DHCP is disabled by default and the interface is accessible via the default IP

(192.168.3.250). DHCP must be disabled first in order to input a static IP address.

Static IP Address Setup

Static settings are configurable here once DHCP has been disabled. CAUTION: Inputting

incorrect static IP settings will make the web page inaccessible requiring a factory reset to

regain access the webpage (see Factory Reset, page 8).

6BDAMON02-NPA72 Manual

BDAMON02-NFPA72 USERS MANUAL

DNS Server Setup

Auto DNS is disabled in default settings. To enable, select Enableoption and click Save

Changes

Static DNS Server Setup

To setup a Static DNS Server, first disable the automatic DNS Server option, click Save

Changesinput desired Static DNS settings and click Save Changesagain.

Email Setup

The BDA Monitor can send alarm messages to up to 5 separate configured email addresses.

Email alarm recipients are selectable on the Alarm Setup page.

BDAMON02-NFPA72 USERS MANUAL

BDAMON02-NFPA72 Manual

Date & Time

The BDAMON02-NFPA72 is configured to automatically synchronize with NIST internet time

servers. Select the Time Zone GMTdifferential specific to the time zone of your location.

Misc. Setup

Misc. Setup (miscellaneous settings) contains unit settings including Unit Name, Home Page

Refresh Rate, SNMP Trap and Password Reset.

Setting Unit Name(s)

Each amplifier has its own default unit name which can be changed to any preferred unit

name. The input unit name displays on the home page and appears in email alarm messages

and SNMP Traps.

8BDAMON02-NPA72 Manual

BDAMON02-NFPA72 USERS MANUAL

Password Reset

The default username and password for the unit is adminTo change, insert your desired

username/password and click Submit

SNMP Trap Setup

SNMP Traps provide a convenient method to monitor unit notifications through an SNMP

client. Insert desired SNMP settings here and click SubmitClick Send SNMP Testto

verify connectivity after desired settings are submitted.

Obtaining the MIB File

The MIB file for SNMP Trap is provided, and additional information on SNMP setup is

available for download from the EMR website at: http://emrcorp.com/downloads/BDAMON/

Factory Reset

To reset the unit to factory default settings, remove power from the unit, press and hold the

Reset button on the front of the unit while reapplying power to the unit. Continue to hold the

Reset button until the unit beeps multiple times.

CAUTION: This clears all user defined settings made to the unit!

Inhaltsverzeichnis

Andere EMR Verstärker Handbücher

EMR

EMR BDAMON02-MODEM Bedienungsanleitung

Beliebte Verstärker Handbücher anderer Marken

ASTRO

ASTRO HVO V40 P Bedienungsanleitung

Marantz

Marantz SUPERSCOPE BLA-545 Montageanleitung

NAD

NAD CI980 Bedienungsanleitung

Technics

Technics SE-CH770 Bedienungsanleitung

Harman Kardon

Harman Kardon HK6300 Bedienungsanleitung

NAD

NAD T975 Bedienungsanleitung

McIntosh

McIntosh MA6850 Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Bedienungsanleitung

Viatron

Viatron Autrix Bedienungsanleitung

GME

GME GA9800 Bedienungsanleitung

Atlas

Atlas CP700 Bedienungsanleitung

Roland

Roland KC-1000 Bedienungsanleitung

Pyle

Pyle PFMRA350BW Bedienungsanleitung

Advantage

Advantage S-250 Bedienungsanleitung

IRT Electronics

IRT Electronics DVA-3007 Bedienungsanleitung

Dimavery

Dimavery BA-100 Series Bedienungsanleitung

Sony

Sony XM-S400D Bedienungsanleitung

Schertler

Schertler ROY X Bedienungsanleitung