10/UK
Note:
Specifications are subjected to change without prior notice.
6 Trouble Shooting
In some region, the digital terrestrial signal may be weak. So you’d better use the antenna in
which the booster was built, for watching the weak signal channels.
Problem Possible cause What to do
Standby light not lit Mains lead unplugged
Mains fuse blown Check mains lead
Check fuse
No signal found Aerial is disconnected
Aerial is damaged /misaligned
Out of digital signal area
Check aerial lead
Check aerial
Check with dealer
No picture or sound Tuned to digital teletext channel Reduce to another channel
Scrambled channel message Channel is scrambled Select alternative channel
No response to remote controller Receiver off
Handset not aimed correctly
Front panel obstructed
Hand set batteries exhausted
Plug in and turn on plug
Aim handset at front panel
Check for obstructions
Replace handset batteries
Forgotten channel lock code Re-install channels to cancel
channel lock
Forgotten menu lock code Contact help line
The remote controller will not ope-
rate your SCART receiver. (1)The batteries in your remote
controller need replacing
(2)There is an obstruction blocking
the signal path between the remote
controller and the box.
(1)Replace the batteries.
(2) Check that there is nothing in the
way of the path between the remote
controller and the receiver.
After moving the SCART receiver
to another room you find you are
no longer able to receive digital
reception.
The aerial feed former new point
may come through a distribution
system which may reduce the digital
signal now received by the box.
Try a direct feed from the antenna.
Note:
Specifications are subjected to change without prior notice.
6 Trouble Shooting
In some region, the digital terrestrial signal may be weak. So you’d better use the antenna in
which the booster was built, for watching the weak signal channels.
Problem Possible cause What to do
Standby light not lit Mains lead unplugged
Mains fuse blown Check mains lead
Check fuse
No signal found Aerial is disconnected
Aerial is damaged /misaligned
Out of digital signal area
Check aerial lead
Check aerial
Check with dealer
No picture or sound Tuned to digital teletext channel Reduce to another channel
Scrambled channel message Channel is scrambled Select alternative channel
No response to remote controller Receiver off
Handset not aimed correctly
Front panel obstructed
Hand set batteries exhausted
Plug in and turn on plug
Aim handset at front panel
Check for obstructions
Replace handset batteries
Forgotten channel lock code Re-install channels to cancel
channel lock
Forgotten menu lock code Contact help line
The remote controller will not ope-
rate your SCART receiver. (1)The batteries in your remote
controller need replacing
(2)There is an obstruction blocking
the signal path between the remote
controller and the box.
(1)Replace the batteries.
(2) Check that there is nothing in the
way of the path between the remote
controller and the receiver.
After moving the SCART receiver
to another room you find you are
no longer able to receive digital
reception.
The aerial feed former new point
may come through a distribution
system which may reduce the digital
signal now received by the box.
Try a direct feed from the antenna.
