Enable-IT 864 Mini Bedienungsanleitung

Ethernet Extension Experts

Enable-IT 864 Mini

Ethernet Extender DSLAM

Quickstart Guide



Page 2 of 5Ethernet Extension Experts

INSTALLING THE 864 EXTENDED ETHERNET DSLAM

Installation

The Enable-IT 864 Extended Ethernet DSLAM can support (4) 864 Pro CPE units up to

6,000ft or 1,828m over 1-pair copper wiring end to end.

Total distance limitation of 6,000ft or 1,829m from end to end.

1 Pair copper wiring .30 Gage or better cabling is required for the 864 Interlink

ports transmission.

For the Interlink wiring you can use either RJ-45 or RJ-11 connectors. Crimp a RJ-

45 Male Head to each end of the contiguous wire run and using the following pins (1

& 2) straight through. This will deliver 1 Voice line, Ethernet Data. If you desire to use

the second voice line, you can also use pins (3 & 6) on each end straight through.

The 864 Interlink port (RJ-45 interface) carries this 1-pair signaling over the RJ-45

pins (1 & 2) - used for transport for both voice and data. If you use more than 1-pair

of wiring such as a CAT5 segment, the RJ-45 pins (3 & 4) are used for Voice line 2

and the remaining pins 4,5,7 & 8 are can transport native PoE or are unused. As an

option the RJ-11 interface on the side of the 864 for use with existing RJ-11 wiring.

The RJ-11 dongles do not transport PoE currently but can be easily added if needed

on request at time of ordering.

The Overview Diagram: This diagram shows the contents of the product box inside the

rectangle. Devices outside the rectangle above are your equipment that can be attached.

We highly recommend a quick test to ensure the working order of your 864 mini

DSLAM to your 864 Pro CPE units.

Page 3 of 5Ethernet Extension Experts

Step 1 –Use an Ethernet patch cord and attach to any 864 Interlink port to an 864 Pro

CPE unit. Power up both devices.

Step 2 –The Green Sync LEDs will start flickering slowly and then fast as the units talk

to each other. After a few seconds you should see a solid Green Interlink Sync LED on

each unit to confirm a link is established. This confirms basic proper operation of the

units.

LED indicators will provide visual operational status of the 864 units.

Sync - Slow to fast flicker on power up –indicates negotiation of a link.

Solid Green LED indicates link established and rapid pulse is traffic.

Pwr - Solid Green LED indicates that both units are receiving 5v power.

Mode - Solid Yellow LED on CPE unit only –No LED lit on CO

ACT - Yellow LEDs –Lit solid indicates the presence of local LAN

–Blinking indicates the presence of local LAN traffic

Step 3 –Next for a more detailed test and to confirm your LAN Equipment works with the

864 Mini DSLAM, connect your local Ethernet LAN to the 864 LAN port 1 or LAN 2 and

remote device to any 864 Pro CPE LAN ports and test connectivity. The Green Interlink

Sync LED will pulse rapidly as it detects traffic.

Dongle pins: DSL port center pair (2&3) = Data

Phone port –center pair (2&3) = Voice 1 Outside pair (1&4) = Voice 2

864 Pro CPE

864 CO

Page 4 of 5Ethernet Extension Experts

Performance Settings

If you are experiencing performance issues with your Ethernet connection you may use the

following Dip switch settings to adjust your application. For Dip switch 2-4 you must toggle

both symmetrically, in other words the CO and CPE must match. If you turn 3 up on the CO

you must do so for the CPE and vice-versa.

Dip Switch 1: Toggles the 864 Pro for either CO or CPE mode. (CO mode Up, CPE mode

Down)

Dip Switch 2: This toggles your 864 Pro for either Interleave or Fast mode –Default setting is

set to Fast which is preferred for streaming multimedia, where an occasional dropped bit is

acceptable, but lags are less so. Interleave channel works better for file transfers, where the

delivered data must be error free but latency incurred by the retransmission of errored

packets is acceptable.

Dip Switch 3: This toggles symmetrical/asymmetrical mode for dsl transmissions.

Symmetrical balances out the download/upload speed for transmitting data packets.

Asymmetrical mode weighs in favor of download speed while sacrificing upload speed

bandwidth. We suggest flipping Dip switch 3 Up (OFF) at a distance of 1,500 feet or less.

Dip Switch 4: This toggles the Signal Noise Ratio (SNR). Default is set to 9dB which is

excellent for long distance communications whereas flipping the switch Up (OFF) toggles

6dB mode. If you experience issues of noise bleeding over the lines or high interference in

your environment it is suggested that you switch to 6dB mode and change to interleave

mode. This will help clean up any noise bleeding over your cabling.



Default DIP settings

860 Pro CPE –All down set in the ON position

860 Pro CO –DIP position 1 up (OFF)

DIPs 2-4 down (ON)

Page 5 of 5Ethernet Extension Experts

Technical Support

Enable-IT OEM Technical Support is available directly to customers and distributors. All

support requests are processed through the online support portal. This allows us to provide

assigned support ticket numbers in order to bring closure to any technical issues.

Online Technical Services

The Enable-IT Support Portal is available 24/7. No password or user account is necessary.

Please use this support website as your first source for help as it contains an on line

knowledge base of articles, documentation, FAQ's and other problem-solving resources. This

web-based support resource provides the quickest solution to the most common technical

support issues.

http://support.enableit.com

ENABLE-IT LIMITED WARRANTY

Enable-IT warrants the Enable-IT 864 Mini Extended Ethernet DSLAM Kits solely pursuant

to the following terms and conditions.

1. PRODUCT WARRANTY

a. Express Warranty Enable-IT warrants to the original purchaser of the Product ("you" or the "End

User") that, for the four (4) year period commencing on the date the Product was purchased (the

"Warranty Period"), the Product will be substantially free from defects in materials and workmanship

under normal use and conditions. This warranty does not apply to Products which are resold as

used, repaired or reconditioned or consumables (such as batteries) supplied with the Product.

Electrical damage is not an item that is covered under this warranty or extended warranties.

Enable-IT does not make any warranty with respect to any third party product, software or accessory

supplied with or used in connection with the Product and such third party products, software and

accessories, if any, are provided "AS IS." Warranty claims related to such third party products,

software and accessories must be made to the applicable third party manufacturer.

European Sales: North American Sales: Asia Pacific Sales:

+44 1 908 560200 +1 888 309-0910 +61 02 8898-9622

+44 1 908 565533 fax +1 866 389-860 Pro5 fax +61 2 9939-0005 fax

http://www.enable-it.eu http://www.enableit.com http://www.enable-it.com.au

sales@enable-it.eu sales@enableit.com sales@enable-it.com.au

Middle East Sales: Other International:

+971-50-435-8310 +1 702 924-0402

http://www.enableit.com +1 702 800-2711 fax

sales@enableit.com

Inhaltsverzeichnis

Andere Enable-IT Extender Handbücher

Enable-IT

Enable-IT 865W PRO Bedienungsanleitung

Enable-IT

Enable-IT 864 Bedienungsanleitung

Enable-IT

Enable-IT 860 Series Bedienungsanleitung

Enable-IT

Enable-IT 820P Pro Bedienungsanleitung

Enable-IT

Enable-IT 8924 Bedienungsanleitung

Enable-IT

Enable-IT 860XS PRO Bedienungsanleitung

Enable-IT

Enable-IT 824P Bedienungsanleitung

Enable-IT

Enable-IT Pro 860C Bedienungsanleitung

Enable-IT

Enable-IT 870 CPE Bedienungsanleitung

Enable-IT

Enable-IT 868 PRO Bedienungsanleitung

Enable-IT

Enable-IT 821P Bedienungsanleitung

Enable-IT

Enable-IT 860XSC PRO Bedienungsanleitung

Enable-IT

Enable-IT 821CW Bedienungsanleitung

Enable-IT

Enable-IT 860 Series Bedienungsanleitung

Enable-IT

Enable-IT 860 Series Bedienungsanleitung

Enable-IT

Enable-IT 860XW PRO Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Enable-IT

Enable-IT 821WP Bedienungsanleitung

Enable-IT

Enable-IT 864P Mini DSLAM Bedienungsanleitung

Enable-IT

Enable-IT 860 PRO Rev C Bedienungsanleitung

Enable-IT

Enable-IT 821C Bedienungsanleitung

Enable-IT

Enable-IT 828W Bedienungsanleitung

Enable-IT

Enable-IT 860WC PRO Bedienungsanleitung

Enable-IT

Enable-IT 865XC PRO Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung