Enclume DR29 Bedienungsanleitung
Enclume Reversible Arm Rack with Grid
Décor Model DR29
Enclume kitchen racks are tops in
quality, design, strength and function.
You will en
j
o
y
man
y
y
ears of service
from this fine cookware rack.
WARNING:
READ ALL OF THE INSTRUCTIONS BEFORE
ASSEMBLING AND USING YOUR RACK.
Enclosed you will find everything needed for
the assembly and installation of your pot rack.
Two people make these tasks easier.
The parts and hardware included are:
Hardware included:
2 –Décor Ceiling Hooks
2 – 2” 'S' Hooks
4 –1/4” x 1/2” Button Head Screws
2 – Barrel Nuts
2 –Barrel Screws
2 – 5/32" Hex Keys
1 – Two-Point Toggle Kit
Components included:
4 – Upright Arms
1 – Oval Rack Body
2 – Hang Tabs
6 - Grid brackets - EGB
12 - Pot hooks - EPHS
1 – Hanging Grid
ASSEMBLY INSTRUCTIONS
1) Lay the ova rack body on a firm surface. Protect this surface with the corrugated box if necessary.
2) Identify the four Upright Arms" Using the 1/4" x 1/2" Button Head Screws attach the Uprights to the outside of the Oval as
shown. Do not fully tighten the four screws at this time.
3) Locate the two Barrel Bolt sets (one barrel nut and one barrel screw per set) and the two Hang Tab , then attach together the tops
of the two sets of Upright Arms by placing a Hanging Tab between each set of Arms -- using a Barrel Bolt pair to connect each
set of Arm tops and Tab all together.
4) Take care to make sure the part of the Hanging tab protruding from between the Arms is the one with the large hanging hole.
Tighten all Button Head and Barrel Bolt screws at this time.
5) Style decision: You may turn the Upright Arms upside down for installation and achieve either a curved look or what we call a
pagoda look. The style is your choice!
INSTALLATION INSTRUCTIONS
6) Your Rack may now be carefully anchored into your ceiling. First carefully measure the area where the rack is to be hung. And
mark the hanging points for the rack. Then:
A) If the surface is the solid wood of ceiling joist or beams, you may install the included Ceiling Screw Hook for hanging.
Note: The arms are shown in the curved confi
g
uration here vs. the alternative
p
a
g
oda st
y
le.
Pagoda Style Arms
Curved Arms
INSTALLATION INSTRUCTIONS, continued
6) B) If you are mounting in a dry wall or plasterboard ceiling, use the included Toggles and follow the instruction in the Two-
Point Toggle kit to mount a Ceiling Screw Hook for hanging.
7) Place the six grid brackets over the sides of the rack, two on each end of the oval and four just inside each of the upright arms,
with the straight end of the brackets facing the inside of the rack. Next place the grid on top of the grid brackets. (See drawing).
8) Note: Grid as shown in drawings is upside down for illustration purposes. Please turn grid over so crossbars that extend
the width of the grid are facing down. This will help to keep grid from sliding out of position when rack is in use.
9) Insert the "S" Hooks into each of the holes in the Hang Tabs. Carefully lift your rack into place and attach the other end of the
”S” Hooks onto the ceiling screw hook previously inserted into your ceiling.
10) You have now completed installation of your rack. Now time to enjoy it!
11) Distribute the twelve pot hooks included with your rack over the rack body. For balance and safety, please hang your heavier
cookware items on the straight portion of the rack body or in the center of the grid area.
12) All of Enclume hammered steel racks are finished with an industrial acrylic coating designed to give years of protection to
your rack. Cleaning is easily done with a damp cloth. Dry thoroughly after cleaning. If a touch-up is ever needed we recommend
a commercial wax product
It is important that your rack is assembled correctly. If the unit is assembled or
used incorrectly, it could become unstable and collapse, possibly causing injury.
WARNING
Limited Warranty: This product is warranted to be free of material defects for a period of five years from the date of purchase. Your exclusive
remedy is the repair or replacement of the defective product and shall be subject to the following conditions: (1) You notify Enclume of any
defect within the warranty period, and (2) you return the defective product to Enclume, 24 Colwell St., Port Hadlock, WA 98339, postage
prepaid within 20 days following your receipt of a return authorization number from Enclume (which may be obtained by telephoning Enclume
at the number below). There are no other warranties, expressed or implied. THERE ARE NO WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE. ENCLUME SPECIFICALLY DISCLAIMS ANY AND ALL INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE PURCHASE OR USE OF ITS PRODUCTS.
Andere Enclume Rack & Stand Handbücher
Enclume
Enclume Decor DR20A Series Gebrauchsanweisung
Enclume
Enclume PR2 Bedienungsanleitung
Enclume
Enclume DR5 Gebrauchsanweisung
Enclume
Enclume CWS8kd Bedienungsanleitung
Enclume
Enclume PR37 Gebrauchsanweisung
Enclume
Enclume LR1A Gebrauchsanweisung
Enclume
Enclume PR33 Gebrauchsanweisung
Enclume
Enclume PR41 Bedienungsanleitung
Enclume
Enclume Classic Rectangle Bedienungsanleitung
Enclume
Enclume PR15 Bedienungsanleitung
Enclume
Enclume DR1 KD Gebrauchsanweisung
Enclume
Enclume Decor DR23 Bedienungsanleitung
Enclume
Enclume QR1 Gebrauchsanweisung
Enclume
Enclume DR18-Decor Gebrauchsanweisung
Enclume
Enclume DR20 Gebrauchsanweisung
Enclume
Enclume S RACK PR17 Bedienungsanleitung
Enclume
Enclume LR32 Bedienungsanleitung
Enclume
Enclume LR7 Gebrauchsanweisung
Enclume
Enclume PR8b-24 Bedienungsanleitung
Enclume
Enclume Classic Decor DR1 KD Series Bedienungsanleitung
Beliebte Rack & Stand Handbücher anderer Marken
Salamander
Salamander Acadia AC/W/L400/WH Bedienungsanleitung
Fohhn
Fohhn VAT-09 Benutzerhandbuch
ricoo
ricoo FS0522 Bedienungsanleitung
AMSOIL
AMSOIL BMK-22 Kurzanleitung
Kargo Master
Kargo Master 48220 Bedienungsanleitung
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung
