Endress+Hauser Deltabar FMD71 Bedienungsanleitung

Products Solutions Services

Description of Device Parameters

Deltabar FMD71, FMD72

Level measurement with electronic differential pressure

Electronic differential pressure transmitter with ceramic

and metal sensors

GP01013P/00/EN/06.17

71376029

Valid as of version

01.00.00

Deltabar FMD71, FMD72

2 Endress+Hauser

Order code:

Ext. ord. cd.:

Ser. no.:

www.endress.com/deviceviewer Endress+Hauser

Operations App

XXXXXXXXXXXX

XXXXX-XXXXXX

XXX.XXXX.XX

Serial number

A0023555

Deltabar FMD71, FMD72 Table of contents

Endress+Hauser 3

Table of contents

1 Document information .............. 4

1.1 Document function ..................... 4

1.2 Symbols used .......................... 4

1.3 Documentation ........................ 5

1.4 Terms and abbreviations ................. 7

1.5 Turn down calculation ................... 8

1.6 Registered trademarks ................... 8

2 Operation options .................. 9

2.1 Operation with an operating menu .......... 9

2.2 Structure of the operating menu ............ 9

2.3 Operating options ..................... 10

2.4 Operating the device using onsite display

(optional) ........................... 10

2.5 Operation using Endress+Hauser operating

program ............................ 13

2.6 Direct access to parameters .............. 14

2.7 Locking/unlocking operation ............. 14

2.8 Resetting to factory settings (reset) ........ 15

3 Backing up or duplicating the

device data ........................ 16

4 Overview of the operating menu .... 18

5 Description of Device Parameters ... 23

5.1 Expert ............................. 23

5.2 Expert → System ...................... 23

5.3 Expert → System → Instrument info ........ 24

5.4 Expert → System → Display ............... 26

5.5 Expert → System → Management .......... 29

5.6 Expert → Measurement ................. 29

5.7 Expert → Measurement → Basic setup ....... 30

5.8 Expert → Measurement → Pressure ........ 33

5.9 Expert → Measurement → Level ........... 35

5.10 Expert → Measurement → Linearization ..... 40

5.11 Expert → Measurement → Sens. limit HP .... 43

5.12 Expert → Measurement → Sens. limit LP ..... 44

5.13 Expert → Measurement → Sensor trim HP .... 44

5.14 Expert →Measurement → Sensor trim LP .... 45

5.15 Expert → Measurement → Current output .... 46

5.16 Expert → Communication → HART config .... 51

5.17 Expert → Communication → HART info ...... 52

5.18 Expert → Communication → HART output .... 54

5.19 Expert → Communication → HART input ..... 57

5.20 Expert → Diagnosis .................... 58

5.21 Expert → Diagnosis → Sensor HP .......... 60

5.22 Expert → Diagnosis → Sensor LP ........... 62

5.23 Expert → Diagnosis → Diagnostic list ........ 63

5.24 Expert → Diagnosis → Event logbook ....... 64

5.25 Expert → Diagnosis → Simulation .......... 64

Index .................................. 68

Document information Deltabar FMD71, FMD72

4 Endress+Hauser

1 Document information

1.1 Document function

The document provides a detailed explanation of each individual parameter in the

operating menu. The description is aimed at those who work with the device over the

entire life cycle and perform specific configurations.

1.2 Symbols used

1.2.1 Safety symbols

Symbol Meaning

DANGER

DANGER!

This symbol alerts you to a dangerous situation. Failure to avoid this situation will

result in serious or fatal injury.

WARNING

WARNING!

This symbol alerts you to a dangerous situation. Failure to avoid this situation can

result in serious or fatal injury.

CAUTION

CAUTION!

This symbol alerts you to a dangerous situation. Failure to avoid this situation can

result in minor or medium injury.

NOTICE

NOTE!

This symbol contains information on procedures and other facts which do not result in

personal injury.

1.2.2 Electrical symbols

Symbol Meaning

Direct current

Alternating current

Direct current and alternating current

Ground connection

A grounded terminal which, as far as the operator is concerned, is grounded via a

grounding system.

Protective Earth (PE)

A terminal which must be connected to ground prior to establishing any other

connections.

The ground terminals are situated inside and outside the device:

• Inner ground terminal: Connects the protectiv earth to the mains supply.

• Outer ground terminal: Connects the device to the plant grounding system.

1.2.3 Symbols for certain types of information

Symbol Meaning

Permitted

Procedures, processes or actions that are permitted.

Preferred

Procedures, processes or actions that are preferred.

Forbidden

Procedures, processes or actions that are forbidden.

Deltabar FMD71, FMD72 Document information

Endress+Hauser 5

Symbol Meaning

Tip

Indicates additional information.

Reference to documentation

Reference to page

Reference to graphic

Visual inspection

1.2.4 Symbols in graphics

Symbol Meaning Symbol Meaning

1, 2, 3 ... Item numbers A, B, C, ... Views

A-A, B-B, C-C, ... Sections

1.3 Documentation

The document types listed are available:

In the Download Area of the Endress+Hauser Internet site: www.endress.com →

Download

1.3.1 Technical Information (TI): planning aid for your device

TI01033P:

The document contains all the technical data on the device and provides an overview of

the accessories and other products that can be ordered for the device.

1.3.2 Brief Operating Instructions (KA): getting the 1st measured

value quickly

KA01105P:

The Brief Operating Instructions contain all the essential information from incoming

acceptance to initial commissioning.

1.3.3 Operating Instructions (BA): your comprehensive reference

BA01044P:

These Operating Instructions contain all the information that is required in various phases

of the life cycle of the device: from product identification, incoming acceptance and

storage, to mounting, connection, operation and commissioning through to

troubleshooting, maintenance and disposal.

1.3.4 Description of Device Parameters (GP): reference for your

parameters

GP01013P:

The document provides a detailed explanation of each individual parameter in the

operating menu. The description is aimed at those who work with the device over the

entire life cycle and perform specific configurations.

Document information Deltabar FMD71, FMD72

6 Endress+Hauser

1.3.5 Safety Instructions (XA)

Safety Instructions (XA) are supplied with the device depending on the approval. These

instructions are an integral part of the Operating Instructions.

Device Directive Documentation Option 1)

FMD71, FMD72 ATEX II 1/2G Ex ia IIC T6 Ga/Gb XA00619P BA

FMD71, FMD72 ATEX II 1/2G Ex d [ia] IIC T6 Ga/Gb XA00620P BC

FMD71, FMD72 ATEX II 3G Ex nA IIC T6 GC XA00621P BD

FMD71, FMD72 IEC Ex ia IIC T6 Ga/Gb XA00622P IA

FMD71, FMD72 IEC Ex d [ia] IIC T6 Ga/Gb XA00623P IB

FMD71, FMD72 CSA General Purpose - CD

FMD71, FMD72 NEPSI Ex ia IIC T4/T6 Ga/Gb XA01352P NA

FMD71, FMD72 NEPSI Ex d [ia] IIC T4/T6 Ga/Gb XA01353P NB

FMD71, FMD72 INMETRO Ex ia IIC T6...T4 Ga/Gb XA01378P MA

FMD71, FMD72 INMETRO Ex d [ia] IIC T6...T4 Ga/Gb XA01379P MC

FMD71, FMD72 EAC Ga/Gb Ex ia IIC T6...T4 XA01594P GA

FMD71, FMD72 EAC Ga/Gb Ex d [ia] IIC T6...T4 X XA01595P GB

FMD71 FM C/US IS Cl.I Div.1 Gr.A-D, AEx ia, Zone 0,1,2 XA00628P FA

FMD71 FM C/US XP AIS Cl.I Div.1 Gr.A-D, Exd [ia] Zone 0,1,2 XA00629P FB

FMD71 CSA C/US XP Cl.I Div.1 Gr.A-D, Ex d [ia], Zone 0,1,2 XA00631P CB

FMD71 FM C/US NI Cl.I Div.2 Gr.A-D, Zone 2 XA00668P FD

FMD71 CSA C/US NI, Cl.I Div. 2, Gr.A-D Cl.I, Zone 2, IIC XA00670P CC

FMD71 CSA C/US IS Cl.I Div.1 Gr.A-D, Ex ia Zone 0,1,2 XA00630P CA

FMD72 CSA C/US IS Cl.I Div.1 Gr.A-D, Ex ia Zone 0,1,2 XA00626P CA

FMD72 CSA C/US XP Cl.I Div.1 Gr.A-D, Ex d [ia], Zone 0,1,2 XA00627P CB

FMD72 CSA C/US NI, Cl.I Div.2 Gr.A-D, Zone 2 XA00671P CC

FMD72 FM C/US IS Cl.I Div.1 Gr.A-D, AEx ia, Zone 0,1,2 XA00624P FA

FMD72 FM C/US XP AIS Cl.I Div.1 Gr.A-D, Exd [ia] Zone 0,1,2 XA00625P FB

FMD72 FM C/US NI Cl.I Div.2 Gr.A-D, Zone 2 XA00669P FD

1) Product Configurator order code for "Approval"

The nameplate provides information on the Safety Instructions (XA) that are relevant

for the device.

Deltabar FMD71, FMD72 Document information

Endress+Hauser 7

1.4 Terms and abbreviations

URL OPLMWP

LRL

LRV URV

A0029505

Position Term/

abbreviation

Explanation

1 OPL The OPL (over pressure limit = sensor overload limit) for the measuring device

depends on the lowest-rated element, with regard to pressure, of the selected

components, i.e. the process connection has to be taken into consideration in

addition to the measuring cell. Also observe pressure-temperature dependency.

For the relevant standards and additional notes, see the "Pressure specifications"

section .

The OPL may only be applied for a limited period of time.

2 MWP The MWP (maximum working pressure) for the sensors depends on the lowest-

rated element, with regard to pressure, of the selected components, i.e. the

process connection has to be taken into consideration in addition to the

measuring cell. Also observe pressure-temperature dependency. For the

relevant standards and additional notes, see the "Pressure specifications"

section .

The MWP may be applied at the device for an unlimited period.

The MWP can also be found on the nameplate.

3 Maximum sensor

measuring range

Span between LRL and URL

This sensor measuring range is equivalent to the maximum calibratable/

adjustable span.

4 Calibrated/

adjusted span

Span between LRV and URV

Factory setting: 0 to URL

Other calibrated spans can be ordered as customized spans.

p - Pressure

- LRL Lower range limit

- URL Upper range limit

- LRV Lower range value

- URV Upper range value

- TD (Turn down) Turn down

Example - see the following section.

Document information Deltabar FMD71, FMD72

8 Endress+Hauser

1.5 Turn down calculation

LRV URLURV

LRL

1 = 2 3

A0029545

1 Calibrated/adjusted span

2 Zero point-based span

3 URL sensor

Example

• Sensor:10 bar (150 psi)

• Upper range value (URL) = 10 bar (150 psi)

Turn down (TD):

• Calibrated/adjusted span: 0 to 5 bar (0 to 75 psi)

• Lower range value (LRV) = 0 bar (0 psi)

• Upper range value (URV) = 5 bar (75 psi)

TD = URL

|URV - LRV|

TD = 10 bar (150 psi) = 2

|5 bar (75 psi) - 0 bar (0 psi)|

In this example, the TD is 2:1.

This span is based on the zero point.

1.6 Registered trademarks

1.6.1 HART®

Registered trademark of the FieldComm Group, Austin, USA

Deltabar FMD71, FMD72 Operation options

Endress+Hauser 9

2 Operation options

2.1 Operation with an operating menu

2.1.1 Operation concept

Operation with an operating menu is based on an operation concept with "user roles" .

User role Meaning

Operator Operators are responsible for the devices during normal "operation". This is usually limited to

reading process values either directly at the device or in a control room. If the work with the

devices extends beyond value read-off tasks, the tasks involve simple, applicationspecific

functions that are used in operation. Should an error occur, these users simply forward the

information on the errors but do not intervene themselves.

Maintenance Service engineers usually work with the devices in the phases following device commissioning.

They are primarily involved in maintenance and troubleshooting activities for which simple

settings have to be made at the device. Technicians work with the devices over the entire life

cycle of the product. Thus, commissioning and advanced settings and configurations are some of

the tasks they have to carry out.

Expert Experts work with the devices over the entire life cycle of the device, but, at times, have high

device requirements. Individual parameters/functions from the overall functionality of the

devices are required for this purpose time and again. In addition to technical, process-oriented

tasks, experts can also perform administrative tasks (e.g. user administration). "Experts" can

access the entire parameter set.

2.2 Structure of the operating menu

User role Submenu Meaning/use

Operator Language Only consists of the "Language" parameter (000) where the operating language for

the device is specified. The language can always be changed even if the device is

locked.

Operator Display/

operat.

Contains parameters that are needed to configure the measured value display

(selecting the values displayed, display format, display contrast, etc.). With this

submenu, users can change the measured value display without affecting the actual

measurement.

Maintenance Setup Contains all the parameters that are needed to commission measuring operations.

This submenu has the following structure:

•Standard setup parameters

A wide range of parameters, which can be used to configure a typical application,

is available at the start. The measuring mode selected determines which

parameters are available. After making settings for all these parameters, the

measuring operation should be completely configured in the majority of cases.

•"Extended setup" submenu

The "Extended setup" submenu contains additional parameters for more indepth

configuration of the measurement operation to convert the measured value and

to scale the output signal. This menu is split into additional submenus depending

on the measuring mode selected.

Operation options Deltabar FMD71, FMD72

10 Endress+Hauser

User role Submenu Meaning/use

Maintenance Diagnosis Contains all the parameters that are needed to detect and analyze operating errors.

This submenu has the following structure:

•Diagnostic list

Contains up to 10 error messages currently pending.

•Event logbook

Contains the last 10 error messages (no longer pending).

•Instrument info

Contains information on the device identification.

•Measured values

Contains all the current measured values

•Simulation

Is used to simulate pressure, level, current and alarm/warning.

•Reset

•Sensor LP

•Sensor HP

Expert Expert Contains all the parameters of the device (including those in one of the submenus).

The "Expert" submenu is structured by the function blocks of the device. It thus

contains the following submenus:

•System

Contains all the device parameters that neither affect measurement nor

integration into a distributed control system.

•Measurement

Contains all the parameters for configuring the measurement.

•Output

Contains all the parameters for configuring the current output.

•Communication

contains all parameters for configuring the HART interface.

•Diagnosis

Contains all the parameters that are needed to detect and analyze operating

errors.

2.3 Operating options

2.3.1 Local operation

A0017650

1 Display and operating module with push buttons. Cover must be opened for operation.

2.4 Operating the device using onsite display (optional)

A 4-line liquid crystal display (LCD) is used for display and operation. The onsite display

shows measured values, dialog text as well as fault and notice messages in plain text,

thereby supporting the user in every stage of operation.

The display can be removed for easy operation.

The device display can be turned in 90° steps.

Depending on the installation position of the device, this makes it easy to operate the

device and read the measured value.

Andere Handbücher für Deltabar FMD71

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Endress+Hauser Messgerät Handbücher

Endress+Hauser

Endress+Hauser Stamosens CSM750 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Prosonic Flow 93T Portable Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promass 40E Handbuch

Endress+Hauser

Endress+Hauser Liquiphant FTL62 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquiline System CA80PH Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Cubemass C 500 Handbuch

Endress+Hauser

Endress+Hauser Deltabar S FMD76 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Prosonic M FMU44 Bedienungsanleitung

Endress+Hauser

Endress+Hauser FEC 12 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Prowirl 73 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Bedienungsanleitung

Endress+Hauser

Endress+Hauser FTL62 Series Gebrauchsanweisung

Endress+Hauser

Endress+Hauser Flowfit CYA27 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag L 400 Technische Daten

Endress+Hauser

Endress+Hauser SS500 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Mycom CLM 152 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Levelflex FMP51 Technische Daten

Endress+Hauser

Endress+Hauser Prosonic M FMU40 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cerabar S PMC71 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Prosonic Flow 93 Bedienungsanleitung

Endress+Hauser

Endress+Hauser HART Proline t-mass I 300 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Micropilot M FMR250 Handbuch

Endress+Hauser

Endress+Hauser CUM 750 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proservo NMS5 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung

Konica Minolta

Konica Minolta BC-10 Plus Bedienungsanleitung

Uniks

Uniks C126 Bedienungsanleitung