Endress+Hauser EngyCal RH33 Technische Daten

Brief operating instructions

EngyCal® RH33

BTU meter

These instructions are Brief Operating Instructions.

For detailed information, refer to the Operating Instructions and other

documentation on the CD-ROM provided or under "www.endress.com/

deviceviewer".

These Brief Operating Instructions do not replace the Operating Instructions.

The complete device documentation consists of:

• These Brief Operating Instructions

• A CD-ROM with:

– The Operating Instructions.

– Approvals and safety certificates.

– Other device-specific information.

KA00289K/09/EN/01.11

71134230

Table of contents EngyCal® RH33

2 Endress+Hauser

Table of contents

1 Safety instructions ......................................... 3

1.1 Designated use ............................................... 3

1.2 Installation, commissioning and operation .................................. 3

1.3 Operational safety .............................................. 3

1.4 Return ................................................... 3

1.5 Notes on safety conventions and icons .................................... 3

2 Identification ............................................. 5

2.1 Device tag ................................................. 5

2.2 Scope of delivery .............................................. 6

2.3 Certificates and approvals .......................................... 6

3 Installation .............................................. 7

3.1 Incoming acceptance, transport and storage ................................. 7

3.2 Dimensions ................................................. 8

3.3 Installation conditions ........................................... 11

3.4 Installation instructions ........................................... 11

3.5 Temperature sensor installation instructions ................................. 16

3.6 Requirements for dimensioning ....................................... 17

3.7 Post-installation check ........................................... 17

4 Wiring ................................................. 18

4.1 Connection requirements ......................................... 18

4.2 Quick wiring guide ............................................. 18

4.3 Connecting the sensors ........................................... 21

4.4 Outputs .................................................. 26

4.5 Communication .............................................. 26

4.6 Post-connection check ........................................... 28

5 Operation .............................................. 29

5.1 General notes for operation ......................................... 29

5.2 Display and operating elements ....................................... 29

5.3 Operating matrix .............................................. 32

6 Commissioning ........................................... 33

6.1 Quick commissioning/make it run ..................................... 33

EngyCal® RH33 Safety instructions

Endress+Hauser 3

1 Safety instructions

Safe operation of the device is only guaranteed if the Operating Instructions have been read and

the safety instructions they contain have been observed.

1.1 Designated use

The BTU meter is a device for measuring energy flow in heating and cooling systems. The

linepowered arithmetic unit can be used universally in industry, long-distance heat and building

systems.

• The manufacturer cannot take responsibility for any damage caused by misuse of the device.

It is not permitted to make any changes or reconstruction to the device.

• The device may be operated in built-in state only.

1.2 Installation, commissioning and operation

The device is safely manufactured using state-of-the-art technology and complies with the

respective regulations and EU Directives. The device could be dangerous if it is incorrectly

installed or used.

Installation, wiring and maintenance of the device must be carried out only by trained, skilled

personnel authorized to perform such work and instructed by the facility's owner-operator. The

skilled personnel must have read and understood these Operating Instructions and it is mandatory

for them to follow the instructions they contain. The operator must ensure that the measuring

system is correctly wired in accordance with the wiring diagrams. When the housing cover is

removed, the shock protection is disabled (danger of electrocution). The housing may be opened

by trained skilled personnel only.

The device may be operated in built-in state only.

1.3 Operational safety

Technical improvement

The manufacturer reserves the right to improve and update the technical details. For details of

improvements or additions to these instructions, please contact your local sales organization.

1.4 Return

For a return, e.g. in case of repair, the device must be sent in protective packaging. The original

packaging offers the best protection. Repairs must only be carried out by your supplier's service

organization.

When sending in for repair, please enclose a note with a description of the error and the

application.

1.5 Notes on safety conventions and icons

The devices are safely manufactured and tested using state-of-the-art technology and have left

the factory in safety-related flawless condition. The devices comply with the respective

regulations and EU Directives. The devices could be dangerous if incorrectly installed or used.

Safety instructions EngyCal® RH33

4 Endress+Hauser

Therefore, consequently observe safety notes which are labeled with the following safety icons

and symbols in these operating instructions:

Symbol Meaning

DANGER

A0011189-EN

DANGER!

This symbol alerts you to a dangerous situation. Failure to avoid this situation will

result in serious or fatal injury.

WARNING

A0011190-EN

WARNING!

This symbol alerts you to a dangerous situation. Failure to avoid this situation can

result in serious or fatal injury.

CAUTION

A0011191-EN

CAUTION!

This symbol alerts you to a dangerous situation. Failure to avoid this situation can

result in minor or medium injury.

NOTICE

A0011192-EN

NOTICE!

This symbol contains information on procedures and other facts which do not result

in personal injury.

EngyCal® RH33 Identification

Endress+Hauser 5

2 Identification

2.1 Device tag

2.1.1 Nameplate

Compare the nameplate on the device with the following figure:

A0013583

å 1 Device nameplate (example)

1Device tag

2 Order code and serial number

3 Supply voltage

4 Power consumption

5 Firmware version

6 Approvals, if available

7 Ambient temperature range

8 Device revision

9 Equipment protected throughout by double insulation or reinforced insulation

10 Place and year of manufacture

2.1.2 Front foil for devices with approval for custody transfer

For devices with the option of approval for custody transfer, the front foil is imprinted with the

following information:

Identification EngyCal® RH33

6 Endress+Hauser

A0013584

å 2 Labeling of front foil for devices with approval for custody transfer

2.2 Scope of delivery

The scope of delivery of the BTU meter comprises:

• BTU meter (field housing)

• Brief Operating Instructions in paper form, Operating Instructions and additional

documentation (on CD-ROM)

• Optional temperatur sensors TR10

• Optional interface cable and DVD set with FieldCare Device Setup parameter configuration

software

• Optional Field Data Manager software MS20

• Optional mounting hardware for top-hat rail, panel mounting, pipe mounting

• Optional overvoltage protection

Please note the device accessories in Section 8 ’Accessories’ of the Operating Instructions

on CD-ROM.

2.3 Certificates and approvals

The BTU meter and the optionally available paired temperature sensors fulfill the requirements

of Directive 2004/22/EC (Measurement Instruments Directive, MID) and OIML R75 and

EN-1434.

If the arithmetic unit with temperature sensors is to be used in commercial applications, the flow

sensor must also have a type approval (incl. conformity assessment) according to MID.

Measuring devices with MID approval have the MID mark on the front foil. ((® å 1, ä 5)).

This approval replaces the initial calibration on-site.

On request, the calibrated arithmetic unit is shipped from the factory preset, but can also be

adjusted individually on-site. Custody transfer-related parameters, such as the pulse value of the

flow transmitter, can be changed up to three times. The changes to the custody transfer-related

parameters are recorded in a custody transfer logbook. This allows individual defective sensors

to be replaced in the field without losing the custody transfer status.

EngyCal® RH33 Installation

Endress+Hauser 7

The device also has a national approval as a BTU meter for cooling or for combined heating/

cooling applications. The initial calibration of these devices is always carried out on-site by a

calibration officer.

CE mark, declaration of conformity

The device is safely built and tested according to state-of-the-art technology and has left the

factory in perfect condition as regards technical safety. The device meets the relevant standards

and directives as per EN 61010-1 "Safety requirements for electrical equipment for measurement,

control and laboratory use".

Thus, the device described in these Operating Instructions meets the legal requirements of the

EU Directives. The manufacturer confirms successful testing of the device by affixing to it the

CE mark.

3 Installation

3.1 Incoming acceptance, transport and storage

The permitted environmental, storage and transportation conditions must be complied with. For

detailed specifications, refer to the "Technical data" chapter in the Operating Instructions on CD-

ROM.

3.1.1 Incoming acceptance

On receipt of the goods, check the following points:

• Are the packaging or contents damaged?

• Are the delivered goods complete? Compare the scope of delivery with your order information.

3.1.2 Transport and storage

Observe the following points:

• Pack the device in such a way as to protect it reliably against impact for storage (and

transportation). The original packaging provides optimum protection.

• The permitted storage temperature range is –40 to +85 °C (–40 to +185 °F); storage in the

temperature limit ranges is possible for a limited time only (maximum of 48 hours).

Installation EngyCal® RH33

8 Endress+Hauser

3.2 Dimensions

A0013438

å 3 Dimensions of the device

EngyCal® RH33 Installation

Endress+Hauser 9

A0014169

å 4 Dimensions of mounting plate for wall, pipe and panel mounting

A0014171

å 5 Dimensions of the panel cutout

Installation EngyCal® RH33

10 Endress+Hauser

A0014610

å 6 Dimensions of top-hat rail adapter

A0015313

å 7 Dimensions of the thermometer TR10 (optional)

LImmersion length, as specified in the order

IL Insertion length = L + neck tube length (80 mm (3.15 in)) + 10 mm (0.4 in)

Andere Handbücher für EngyCal RH33

Inhaltsverzeichnis

Andere Endress+Hauser Messgerät Handbücher

Endress+Hauser

Endress+Hauser Proline Promag D 400 Technische Daten

Endress+Hauser

Endress+Hauser Liquiline System CA80AL Technische Daten

Endress+Hauser

Endress+Hauser Prosonic FDU80 Montageanleitung

Endress+Hauser

Endress+Hauser Analytikjena SELECT Head 8/250 ml Bedienungsanleitung

Endress+Hauser

Endress+Hauser RID14 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquiline System CA80NO Technische Daten

Endress+Hauser

Endress+Hauser COM280 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Promag 800 L Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cerabar S Series Bedienungsanleitung

Endress+Hauser

Endress+Hauser Gammapilot M FMG60 Montageanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Tankvision Multi Scan NXA83B Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar S PMD70 Handbuch

Endress+Hauser

Endress+Hauser Proline Prowirl F 200 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Soliwave FDR56 Bedienungsanleitung

Endress+Hauser

Endress+Hauser SS500 Firmware-Update

Endress+Hauser

Endress+Hauser Micropilot FMR10 Handbuch

Endress+Hauser

Endress+Hauser Proline Prosonic Flow P 500 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Prosonic Flow 93 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cerabar M PMC51? Cerabar M PMP51 Bedienungsanleitung

Endress+Hauser

Endress+Hauser LT5 Bedienungsanleitung

Endress+Hauser

Endress+Hauser SpectraSensors OXY5500 Benutzerhandbuch

Endress+Hauser

Endress+Hauser Levelflex FMP55 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquiline System CA80AM Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung