Endress+Hauser Proline Promag H 200 Technische Daten

Brief Operating Instructions

Proline Promag H 200

Electromagnetic flow measuring system

These Instructions are Brief Operating Instructions; they do not replace the

Operating Instructions included in the scope of supply.

For detailed information, refer to the Operating Instructions and other

documentation on the CD-ROM provided or visit "www.endress.com/

deviceviewer".

KA01120D/06/EN/01.12

71185893

Table of contents Proline Promag H 200

2 Endress+Hauser

Table of contents

1 Document information ...................................... 3

1.1 Symbols used ................................................ 3

2 Basic safety instructions ...................................... 5

2.1 Requirements for the personnel ....................................... 5

2.2 Designated use ............................................... 5

2.3 Workplace safety .............................................. 6

2.4 Operational safety .............................................. 6

2.5 Product safety ................................................ 6

3 Product description ......................................... 7

3.1 Product design ............................................... 7

4 Incoming acceptance and product identification ..................... 8

4.1 Incoming acceptance ............................................ 8

4.2 Product identification ............................................ 9

5 Storage and transport ...................................... 12

5.1 Storage conditions ............................................. 12

5.2 Transporting the product .......................................... 13

6 Installation .............................................. 14

6.1 Installation conditions ........................................... 14

6.2 Mounting the measuring device ...................................... 18

6.3 Post-installation check ........................................... 23

7 Electrical connection ....................................... 25

7.1 Connection conditions ........................................... 25

7.2 Connecting the measuring device ...................................... 27

7.3 Ensuring the degree of protection ...................................... 31

7.4 Post-connection check ........................................... 32

8 Operation options ......................................... 33

8.1 Structure and function of the operating menu ................................ 33

8.2 Access to the operating menu via the local display .............................. 34

8.3 Access to the operating menu via the operating tool ............................. 40

9 System integration ........................................ 41

10 Commissioning ........................................... 41

10.1 Function check .............................................. 41

10.2 Switching on the measuring device ..................................... 41

10.3 Setting the operating language ....................................... 42

10.4 Configuring the measuring device ..................................... 42

10.5 Defining the tag name ........................................... 43

10.6 Protecting settings from unauthorized access ................................ 43

11 Diagnostic information ...................................... 45

Proline Promag H 200 Document information

Endress+Hauser 3

1 Document information

1.1 Symbols used

1.1.1 Safety symbols

Symbol Meaning

DANGER

A0011189-EN

DANGER!

This symbol alerts you to a dangerous situation. Failure to avoid this situation will result in serious

or fatal injury.

WARNING

A0011190-EN

WARNING!

This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in serious

or fatal injury.

CAUTION

A0011191-EN

CAUTION!

This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in minor

or medium injury.

NOTICE

A0011192-EN

NOTICE!

This symbol contains information on procedures and other facts which do not result in personal

injury.

1.1.2 Electrical symbols

Symbol Meaning

A0011197

Direct current

A terminal to which DC voltage is applied or through which direct current flows.

A0011198

Alternating current

A terminal to which alternating voltage is applied or through which alternating current flows.

A0017381

Direct current and alternating current

• A terminal to which alternating voltage or DC voltage is applied.

• A terminal through which alternating current or direct current flows.

A0011200

Ground connection

A grounded terminal which, as far as the operator is concerned, is grounded via a grounding system.

A0011199

Protective ground connection

A terminal which must be connected to ground prior to establishing any other connections.

A0011201

Equipotential connection

A connection that has to be connected to the plant grounding system: This may be a potential equalization

line or a star grounding system depending on national or company codes of practice.

1.1.3 Tool symbols

Symbol Meaning

A0011220

Flat blade screwdriver

Document information Proline Promag H 200

4 Endress+Hauser

A0011221

Allen key

A0011222

Open-ended wrench

1.1.4 Symbols for certain types of information

Symbol Meaning

A0011182

Allowed

Indicates procedures, processes or actions that are allowed.

A0011183

Preferred

Indicates procedures, processes or actions that are preferred.

A0011184

Forbidden

Indicates procedures, processes or actions that are forbidden.

A0011193

Tip

Indicates additional information.

A0011194

Reference to documentation

Refers to the corresponding device documentation.

A0011195

Reference to page

Refers to the corresponding page number.

A0011196

Reference to graphic

Refers to the corresponding graphic number and page number.

,…

Series of steps

ÃResult of a sequence of actions

1.1.5 Symbols in graphics

Symbol Meaning

1, 2, 3,... Item numbers

,…

Series of steps

A, B, C, ... Views

A-A, B-B, C-C, ... Sections

A0013441

Flow direction

Proline Promag H 200 Basic safety instructions

Endress+Hauser 5

Symbol Meaning

A0011187

Hazardous area

Indicates a hazardous area.

A0011188

Safe area (non-hazardous area)

Indicates a non-hazardous area.

2 Basic safety instructions

2.1 Requirements for the personnel

The personnel must fulfill the following requirements for its tasks:

►Trained, qualified specialists must have a relevant qualification for this specific function and

task

►Are authorized by the plant owner/operator

►Are familiar with federal/national regulations

►Before beginning work, the specialist staff must have read and understood the instructions in

the Operating Instructions and supplementary documentation as well as in the certificates

(depending on the application)

►Following instructions and basic conditions

2.2 Designated use

Application and media

The measuring device described in these Instructions is intended only for flow measurement of

liquids with a minimum conductivity of 20 mS/cm.

Depending on the version ordered, the measuring device can also measure potentially explosive,

flammable, poisonous and oxidizing media.

Measuring devices for use in hazardous areas, in hygienic applications or in applications where

there is an increased risk due to process pressure, are labeled accordingly on the nameplate.

To ensure that the measuring device remains in proper condition for the operation time:

►Only use the measuring device in full compliance with the data on the nameplate and the

general conditions listed in the Operating Instructions and supplementary documentation.

►Based on the nameplate, check whether the ordered device is permitted for the intended use

in the hazardous area (e.g. explosion protection, pressure vessel safety).

►Use the measuring device only for media against which the process-wetted materials are

adequately resistant.

►If the measuring device is not operated at atmospheric temperature, compliance with the

relevant basic conditions specified in the device documentation provided (on the CD-ROM)

is absolutely essential.

Incorrect use

Non-designated use can compromise safety. The manufacturer is not liable for damage caused

by improper or non-designated use.

Basic safety instructions Proline Promag H 200

6 Endress+Hauser

!WARNING

Danger of breakage of the sensor due to corrosive or abrasive fluids!

►Verify the compatibility of the process fluid with the sensor material.

►Ensure the resistance of all fluid-wetted materials in the process.

►Observe the specified maximum process pressure.

Verification for borderline cases:

►For special fluids and fluids for cleaning, Endress+Hauser is glad to provide assistance in

verifying the corrosion resistance of fluid-wetted materials, but does not accept any warranty

or liability as minute changes in the temperature, concentration or level of contamination in

the process can alter the corrosion resistance properties.

Residual risks

The external surface temperature of the housing can increase by max. 10 K due to the power

consumption of the electronic components. Hot process fluids passing through the measuring

device will further increase the surface temperature of the housing. The surface of the sensor,

in particular, can reach temperatures which are close to the fluid temperature.

Possible burn hazard due to fluid temperatures!

►For elevated fluid temperature, ensure protection against contact to prevent burns.

2.3 Workplace safety

For work on and with the device:

►Wear the required personal protective equipment according to federal/national regulations.

For welding work on the piping:

►Do not ground the welding unit via the measuring device.

2.4 Operational safety

Risk of injury.

►Operate the device in proper technical condition and fail-safe condition only.

►The operator is responsible for interference-free operation of the device.

2.5 Product safety

This measuring device is designed in accordance with good engineering practice to meet state-

of-the-art safety requirements, has been tested, and left the factory in a condition in which they

are safe to operate.

It meets general safety standards and legal requirements. It also complies with the EC directives

listed in the device-specific EC Declaration of Conformity. Endress+Hauser confirms this by

affixing the CE mark to the device.

Proline Promag H 200 Product description

Endress+Hauser 7

3 Product description

3.1 Product design

1 2 345 6 78

–

A0014056

å 1 Important components of a measuring device

1Electronics compartment cover

2 Display module

3 Main electronics module

4 Cable glands

5 Transmitter housing

6 I/O electronics module

7 Terminals (spring loaded terminals, pluggable)

8 Connection compartment cover

9 Sensor

Incoming acceptance and product identification Proline Promag H 200

8 Endress+Hauser

4 Incoming acceptance and product identification

4.1 Incoming acceptance

A0015502

A0013843

A0013695

A0015502

A0013698

A0015502

A0013699

Proline Promag H 200 Incoming acceptance and product identification

Endress+Hauser 9

A0015502

A0013697

If one of the conditions is not satisfied, contact your Endress+Hauser Sales Center.

4.2 Product identification

The following options are available for identification of the measuring device:

• Nameplate specifications

• Order code with breakdown of the device features on the delivery note

•Enter serial numbers from nameplates in W@M Device Viewer

(www.endress.com/deviceviewer): All information about the measuring device is displayed.

For an overview of the scope of the Technical Documentation provided, refer to the following:

The W@M Device Viewer: Enter the serial number from the nameplate

(www.endress.com/deviceviewer)

Incoming acceptance and product identification Proline Promag H 200

10 Endress+Hauser

4.2.1 Transmitter nameplate

Order code:

Ext. ord. cd.:

Ser. no.:

Date:

Patents

322540-0001

345

10 11 12

A0013906

å 2 Example of a transmitter nameplate

1 Manufacturing location

2 Name of the transmitter

3 Order code

4 Serial number

5 Extended order code

6 Electrical connection data, e.g. available inputs and outputs, supply voltage

7 Type of cable glands

8 Permitted ambient temperature range (Ta)

9 Firmware version (FW) and device revision (Dev.Rev.) from the factory

10 CE mark, C-Tick

11 Additional information on version: certificates, approvals

12 Permitted temperature range for cable

13 Manufacturing date: year-month

14 Degree of protection

15 Explosion protection approval information

16 Document number of safety-related supplementary documentation

17 2-D matrix code

Andere Handbücher für Proline Promag H 200

Inhaltsverzeichnis

Andere Endress+Hauser Messgerät Handbücher

Endress+Hauser

Endress+Hauser StamoLys CA 71 HY Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltapilot S FMB70 Gebrauchsanweisung

Endress+Hauser

Endress+Hauser Deltapilot S FMB70 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promass I 100 Handbuch

Endress+Hauser

Endress+Hauser Deltapilot M FMB50 Technische Daten

Endress+Hauser

Endress+Hauser Proline Promass 84F Handbuch

Endress+Hauser

Endress+Hauser FTL64 Series Gebrauchsanweisung

Endress+Hauser

Endress+Hauser CleanFit P CPA 471 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag W 800 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cerabar M Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline t-mass 65 Bedienungsanleitung

Endress+Hauser

Endress+Hauser PROline promag 50 w Handbuch

Endress+Hauser

Endress+Hauser Proline t-mass 65F Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag W 300 PROFINET Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag P 100 Bedienungsanleitung

Endress+Hauser

Endress+Hauser airtrol CPC 200 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Master Meter System Bedienungsanleitung

Endress+Hauser

Endress+Hauser SmarTec S CLD 132 PROFIBUS-PA Bedienungsanleitung

Endress+Hauser

Endress+Hauser TopClean S CPC 30 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquiline System CA80PH Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquiline CA80SI Technische Daten

Endress+Hauser

Endress+Hauser RIA46 Bedienungsanleitung

Endress+Hauser

Endress+Hauser SpectraSensors SS2100 Firmware-Update

Endress+Hauser

Endress+Hauser promag 31 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung