Endress+Hauser Promag 300 Bedienungsanleitung

Andere Handbücher für Promag 300

1

Dieses Handbuch passt für folgende Modelle

5

Inhaltsverzeichnis

Sprachen:

Andere Endress+Hauser Messgerät Handbücher

Endress+Hauser

Endress+Hauser Levelflex FMP56 Bedienungsanleitung

Endress+Hauser

Endress+Hauser SS500 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag W 400 HART Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag H 200 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Prosonic FDU80 Montageanleitung

Endress+Hauser

Endress+Hauser SpectraSensors SS2100i-1 Bedienungsanleitung

Endress+Hauser

Endress+Hauser RIA46 Technische Daten

Endress+Hauser

Endress+Hauser Liquiline System CA80TP Technische Daten

Endress+Hauser

Endress+Hauser Cerabar S PMC71 Gebrauchsanweisung

Endress+Hauser

Endress+Hauser Deltapilot M FMB51 Technische Daten

Endress+Hauser

Endress+Hauser COM 381 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag P 100 Technische Daten

Endress+Hauser

Endress+Hauser Liquiphant FTL62 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Micropilot FMR67 Handbuch

Endress+Hauser

Endress+Hauser HART Proline Promass 83 Bedienungsanleitung

Endress+Hauser

Endress+Hauser analytikjena multi N/C UVHS Bedienungsanleitung

Endress+Hauser

Endress+Hauser nivotester FTC 420 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Prothermo NMT 539 Handbuch

Endress+Hauser

Endress+Hauser Flowfit CUA252 Bedienungsanleitung

Endress+Hauser

Endress+Hauser micropilot M FMR 231 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Cubemass 300 Anwendungshandbuch

Endress+Hauser

Endress+Hauser Liquiline System CA80AM Technische Daten

Endress+Hauser

Endress+Hauser Proline t-mass 65 PROFIBUS DP Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cerabar S PMC71 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung

Konica Minolta

Konica Minolta BC-10 Plus Bedienungsanleitung

Uniks

Uniks C126 Bedienungsanleitung

Products Solutions Services

Installation Instructions

Activating application

packages, switching the I/O

function, upgrading with

additional I/O hardware

Promag/Promass 300, 500, 500-digital

EN Installation Instructions: EA01164D →  3

DE Einbauanleitung: EA01164D →  27

EA01164D/06/A2/02.17

71389157

2018-08-01

EA01164D

Endress+Hauser 3

Activating application packages, switching the I/O

function, upgrading with additional I/O hardware

Promag/Promass 300, 500, 500-digital

Table of contents

1 Overview of modification kits ...................................................... 4

2 Personnel authorized to carry out modification ..................................... 4

3 Personnel authorized to fit new nameplates ........................................ 5

4 Checking the configuration of the modification kit supplied ......................... 5

5 Safety instructions ................................................................ 6

6 Symbols used ..................................................................... 7

7 Tools list .......................................................................... 8

8 Promag, Promass 300, 500, 500–digital ........................................... 8

9 Promag, Promass 300, 500 ....................................................... 17

10 Promag, Promass 500-digital ..................................................... 22

11 Safety-related characteristic values ............................................... 26

EA01164D

4 Endress+Hauser

1 Overview of modification kits

The modification instructions apply to the following order structures:

Order structure Procedure Contents

DK8009- Activation of application package for Promass

300

Software code, wired-on tag plate, wire

cable with crimp sleeve, nameplate (front

foil, optional), Installation Instructions

DK8011- Activation of application package for Promass

500, 500-digital

Software code, wired-on tag plate, wire

cable with crimp sleeve, nameplate (front

foil, optional), Installation Instructions

DK5009- Activation of application package for Promag 300

Software code, wired-on tag plate, wire

cable with crimp sleeve, nameplate (front

foil, optional), Installation Instructions

DK5011- Activation of application package for Promag 500,

500-digital

Software code, wired-on tag plate, wire

cable with crimp sleeve, nameplate (front

foil, optional), Installation Instructions

DKZ004–

Switching I/O for Promass/Promag 300, 500,

500-digital

Software code, wired-on tag plate, wire

cable with crimp sleeve, nameplate (front

foil, optional), Installation Instructions

Upgrading of I/O hardware for Promass/Promag

300, 500, 500-digital

I/O hardware, software code (except for

relays), wired-on tag plate, wire cable with

crimp sleeve, nameplate (front foil,

optional), Installation Instructions

2 Personnel authorized to carry out modification

Authorization to carry out a conversion depends on the measuring device's approval type. The

table below shows the authorized group of people in each case.

2.1 Activating application packages / switching the I/O function:

Measuring device approval Personnel authorized to carry out modification 1)

Without approval 1, 2, 3

With approval (e.g. IECEx) 1, 2, 3

For custody transfer 4

1) 1 = Qualified specialist on customer side, 2 = Service technician authorized by Endress+Hauser,

3 = Endress+Hauser (return measuring device to manufacturer)

4 = Check with local approval center if installation/modification must be performed under supervision.

EA01164D

Endress+Hauser 5

2.2 Upgrading with additional I/O hardware:

Measuring device approval Personnel authorized to carry out modification 1)

Without approval 1, 2, 3

With approval (e.g. IECEx) 2, 3

For custody transfer 4

1) 1 = Qualified specialist on customer side, 2 = Service technician authorized by Endress+Hauser,

3 = Endress+Hauser (return measuring device to manufacturer)

4 = Check with local approval center if installation/modification must be performed under supervision.

3 Personnel authorized to fit new nameplates

Measuring device approval Personnel authorized to fit new nameplates

Without approval 2, 3

With approval (e.g. IECEx) Endress+Hauser*

* Note: Some countries/markets require a field inspection in order to change

nameplates. Please act in accordance with national legislation.

Following modification, back up the data via the device memory or via Web server/

Fieldcare.

4 Checking the configuration of the modification kit

supplied

Modification kits and Installation Instructions are used to upgrade certain functions of an

Endress+Hauser measuring device. Only original parts from Endress+Hauser may be used.

Only modification kits designed by Endress+Hauser for the measuring device can be used at

any time.

EA01164D

6 Endress+Hauser

The configuration of the supplied modification kit can be checked via W@M Device Viewer.

=

www.endress.com/deviceviewer

2.

1.

3.

4. ?

Order code Description

Ser. No.: 12345

1. www.endress.com/deviceviewer

2. Enter the serial number of the modification kit,

search for the product data and click "Order code".

3. The order structure of the modification kit is

displayed.

4. Check the order number of the modification kit.

• Check the serial number against the serial number of

the original device.

• Does the configuration of the modification kit match

the ordered configuration?

= YES, the modification kit may be used for the

measuring device.

= NO, the modification kit may not be used for the

measuring device.

5 Safety instructions

• Only use original parts from Endress+Hauser.

• Comply with national regulations governing mounting, electrical installation,

commissioning, maintenance and modification procedures.

• The specialized technical staff involved in the mounting, electrical installation,

commissioning, maintenance and modification of the measuring devices must meet the

following requirements:

– Specialized technical staff must be trained in instrument safety.

– They must be familiar with the individual operating conditions of the devices.

– In the case of Ex-certified measuring devices, they must also be trained in explosion

protection.

• The measuring device is energized! Risk of fatal injury from electric shock. Open the

measuring device only when the device is de-energized.

• When using Ex-certified measuring devices: Open device only when in a de-energized state

(allow 10 minutes to elapse after switching off the power supply) or in environments which

do not have a potentially explosive atmosphere.

• For measuring devices in safety-related applications in accordance with IEC 61508 or

IEC 61511: Following modification, re-commission the device in accordance with the

Operating Instructions. Document the modification. Pay attention to safety-related

characteristic values →  26

• Before removing the device: set the process to a safe state and purge the pipe of dangerous

process substances.

• Hot surfaces! Risk of injury! Before commencing work: Allow the system and measuring

device to cool down to a touchable temperature.

• In the case of devices in custody transfer, the custody transfer status no longer applies once

the seal has been removed.

• The Operating Instructions for the device must be followed.

EA01164D

Endress+Hauser 7

• Risk of damaging the electronic components! Ensure you have a working environment

protected from electrostatic discharge.

• After removing the electronics compartment cover: risk of electrical shock due to missing

touch protection!

Turn the measuring device off before removing internal covers.

• Only open the housing for a brief period. Avoid the penetration of foreign bodies, moisture

or contaminants.

• Replace defect seals only with original seals from Endress+Hauser.

• If threads are damaged or defective, the measuring device must be repaired.

• Threads (e.g. of the electronics compartment cover and connection compartment cover)

must be lubricated if an abrasion-proof dry lubricant is not available. Use acid-free, non-

hardening lubricant.

• If, during modification, spacing is reduced or the dielectric strength of the measuring device

cannot be guaranteed, perform a test on completion of the work (e.g. high-voltage test in

accordance with the manufacturer's instructions).

• Service plug:

– Do not connect in explosive atmospheres.

– Only connect to Endress+Hauser service devices.

• Observe the instructions for transporting and returning the device outlined in the Operating

Instructions.

If you have any questions, please contact your Endress+Hauser service organization.

6 Symbols used

6.1 Symbols for certain types of information

Symbol Meaning

Permitted

Procedures, processes or actions that are permitted.

Forbidden

Procedures, processes or actions that are forbidden.

Tip

Indicates additional information.

1.

,

2.

,

3.

… Series of steps

EA01164D

8 Endress+Hauser

7 Tools list

3 mm T20 Crimping tool

8 Promag, Promass 300, 500, 500–digital

8.1 Activating application packages / switching the I/O function

Note for E+H service technicians:

Log onto the device with the customer password via the "Maintenance" access level.

8.1.1 Entering the software license code: via the local display

Navigation: in the display menu, select:

1

Activate application packages:

1. Unlock the keypad (2 sec)

2. Main menu → Display language: select the language

3. Main menu → Expert → Entry code factory setting → 0000 or enter the entry code defined

by the customer ( do not enter the service code)

4. Expert → System → Administration → Activate software option: enter software license code

(appl. package code)

5. Main menu → Expert → System → Administration → Software option overview: the

activated software options are displayed

Switch the I/O functionality, activate I/O hardware:

1. Unlock the keypad (2 sec)

EA01164D

Endress+Hauser 9

2. Main menu → Display language: select the language

3. Main menu → Expert → Entry code factory setting → 0000 or enter the entry code defined

by the customer ( do not enter the service code)

4. Main menu → Expert → I/O configuration → alteration code: enter software license code

(I/O alteration code)

Check the data on the wired-on tag plate:

Wired-on tag plate for DK5009, DK50011, DK8009, DK80011:

• Serial number of device

• New order code

• Software license code to be entered (appl. package code)

Wired-on tag plate for DKZ004:

• Serial number of device

• Modification kit serial number

• Device modified with

• New order code

• Software license code to be entered (I/O alteration code)

• Configuration

• Connection data

Fitting the wired-on tag plate (DK5009, DK50011, DK5009, DK50011, DKZ004):

1 →

EA01164D

10 Endress+Hauser

2

Fit the adhesive label (DKZ004):

Replace the adhesive label with the new terminal designation in the connection compartment.

Fit the nameplate:

Fit the nameplate (optional) according to the existing device labeling (see also Section 3

→  5 Authorized personnel).

Following modification, back up the data in the device memory or via Web server/

Fieldcare.