Endress+Hauser SmarTec S CLD 132 PROFIBUS-PA Bedienungsanleitung

Products Solutions Services

Operating Instructions

Smartec CLD132/134

Measuring systems with inductive sensor for conductivity

and concentration measurement in the food industry

PROFIBUS PA/DP

BA00213C/07/EN/15.23-00

71616573

2023-04-30

Smartec CLD132/134 PROFIBUS PA/DP Table of contents

Endress+Hauser 3

Table of contents

1 Document information .............. 4

1.1 Warnings ............................ 4

1.2 Symbols .............................. 4

1.3 Symbols on the device ................... 4

1.4 Documentation ........................ 4

2 Basic safety instructions ............ 5

2.1 Requirements for the personnel ............ 5

2.2 Intended use .......................... 5

2.3 Workplace safety ....................... 5

2.4 Operational safety ...................... 5

2.5 Product safety ......................... 6

3 Incoming acceptance and product

identification ....................... 7

3.1 Incoming acceptance .................... 7

3.2 Product identification .................... 7

3.3 Scope of delivery ....................... 8

4 Installation ........................ 9

4.1 System architecture ..................... 9

4.2 Mounting the measuring device ........... 10

4.3 Post-installation check .................. 10

5 Electrical connection .............. 11

5.1 Connecting the measuring device .......... 11

5.2 Connecting the bus cable ................ 11

5.3 Post-connection check .................. 13

6 Operation ......................... 14

6.1 Display and operating elements ........... 14

6.2 Operation via FieldCare or DeviceCare ...... 14

7 System integration ................ 15

7.1 PROFIBUS PA/DP block model ............ 15

7.2 Cyclic data exchange ................... 20

7.3 Acyclic data exchange .................. 24

8 Commissioning .................... 31

8.1 Function check ....................... 31

8.2 Configuring the device address ............ 31

8.3 Device master files ..................... 33

9 Diagnosis and troubleshooting ..... 35

9.1 System error messages .................. 35

9.2 Process and device-specific errors .......... 36

10 Communication-specific

accessories ........................ 37

11 Protocol-specific data .............. 38

11.1 PROFIBUS-PA ........................ 38

11.2 PROFIBUS-DP ........................ 38

11.3 Human interface ...................... 38

11.4 Standards and guidelines ................ 39

Index .................................. 40

Document information Smartec CLD132/134 PROFIBUS PA/DP

4 Endress+Hauser

1 Document information

1.1 Warnings

Structure of information Meaning

LDANGER

Causes (/consequences)

If necessary, Consequences of

non-compliance (if applicable)

‣Corrective action

This symbol alerts you to a dangerous situation.

Failure to avoid the dangerous situation will result in a fatal or serious

injury.

LWARNING

Causes (/consequences)

If necessary, Consequences of

non-compliance (if applicable)

‣Corrective action

This symbol alerts you to a dangerous situation.

Failure to avoid the dangerous situation can result in a fatal or serious

injury.

LCAUTION

Causes (/consequences)

If necessary, Consequences of

non-compliance (if applicable)

‣Corrective action

This symbol alerts you to a dangerous situation.

Failure to avoid this situation can result in minor or more serious injuries.

NOTICE

Cause/situation

If necessary, Consequences of

non-compliance (if applicable)

‣Action/note

This symbol alerts you to situations which may result in damage to

property.

1.2 Symbols

Additional information, tips

Permitted

Recommended

Forbidden or not recommended

Reference to device documentation

Reference to page

Reference to graphic

 Result of a step

1.3 Symbols on the device

Reference to device documentation

1.4 Documentation

Operating Instructions for Smartec CLD132, BA00207C

Operating Instructions for Smartec CLD134, BA00401C

Guidelines for planning and commissioning PROFIBUS DP/PA, BA00034S

Smartec CLD132/134 PROFIBUS PA/DP Basic safety instructions

Endress+Hauser 5

2 Basic safety instructions

2.1 Requirements for the personnel

• Installation, commissioning, operation and maintenance of the measuring system may

be carried out only by specially trained technical personnel.

• The technical personnel must be authorized by the plant operator to carry out the

specified activities.

• The electrical connection may be performed only by an electrical technician.

• The technical personnel must have read and understood these Operating Instructions

and must follow the instructions contained therein.

• Faults at the measuring point may only be rectified by authorized and specially trained

personnel.

Repairs not described in the Operating Instructions provided must be carried out only

directly at the manufacturer's site or by the service organization.

2.2 Intended use

Smartec CLD132 and CLD134 are measuring systems for measuring conductivity. The

PROFIBUS interface allows the device to be operated using a plant asset management tool,

e.g. FieldCare, or a commissioning tool,e.g. DeviceCare, on the PC.

PROFIBUS is an open fieldbus standard in accordance with IEC 61158/IEC 61508. It is

specially designed to meet the requirements of process engineering and allows multiple

measuring devices to be connected to a bus line. The transmission method according to IEC

1158-2 guarantees safe signal transmission.

Use of the device for any purpose other than that described, poses a threat to the safety of

people and of the entire measuring system and is therefore not permitted.

The manufacturer is not liable for damage caused by improper or non-designated use.

2.3 Workplace safety

As the user, you are responsible for complying with the following safety conditions:

• Installation guidelines

• Local standards and regulations

• Regulations for explosion protection

Electromagnetic compatibility

• The product has been tested for electromagnetic compatibility in accordance with the

applicable international standards for industrial applications.

• The electromagnetic compatibility indicated applies only to a product that has been

connected in accordance with these Operating Instructions.

2.4 Operational safety

Before commissioning the entire measuring point:

1. Verify that all connections are correct.

2. Ensure that electrical cables and hose connections are undamaged.

3. Do not operate damaged products, and protect them against unintentional operation.

4. Label damaged products as defective.

Basic safety instructions Smartec CLD132/134 PROFIBUS PA/DP

6 Endress+Hauser

During operation:

‣If faults cannot be rectified:

products must be taken out of service and protected against unintentional operation.

2.5 Product safety

The product is designed to meet state-of-the-art safety requirements, has been tested, and

left the factory in a condition in which it is safe to operate. The relevant regulations and

international standards have been observed.

We only provide a warranty if the device is installed and used as described in the

Operating Instructions. The device is equipped with security mechanisms to protect it

against any inadvertent changes to the device settings.

IT security measures in line with operators' security standards and designed to provide

additional protection for the device and device data transfer must be implemented by the

operators themselves.

Smartec CLD132/134 PROFIBUS PA/DP Incoming acceptance and product identification

Endress+Hauser 7

3 Incoming acceptance and product

identification

3.1 Incoming acceptance

1. Verify that the packaging is undamaged.

 Notify the supplier of any damage to the packaging.

Keep the damaged packaging until the issue has been resolved.

2. Verify that the contents are undamaged.

 Notify the supplier of any damage to the delivery contents.

Keep the damaged goods until the issue has been resolved.

3. Check that the delivery is complete and nothing is missing.

 Compare the shipping documents with your order.

4. Pack the product for storage and transportation in such a way that it is protected

against impact and moisture.

 The original packaging offers the best protection.

Make sure to comply with the permitted ambient conditions.

If you have any questions, please contact your supplier or your local Sales Center.

3.2 Product identification

3.2.1 Nameplate

The nameplate provides you with the following information on your device:

• Manufacturer identification

• Order code

• Serial number

• Ambient and process conditions

• Input and output values

• Safety information and warnings

• Protection class

‣Compare the information on the nameplate with the order.

3.2.2 Identifying the product

Product page

www.endress.com/CLD132

www.endress.com/CLD134

Interpreting the order code

The order code and serial number of your product can be found in the following locations:

• On the nameplate

• In the delivery papers

Obtaining information on the product

1. Go to www.endress.com.

2. Page search (magnifying glass symbol): Enter valid serial number.

3. Search (magnifying glass).

 The product structure is displayed in a popup window.

Incoming acceptance and product identification Smartec CLD132/134 PROFIBUS PA/DP

8 Endress+Hauser

4. Click the product overview.

 A new window opens. Here you fill information pertaining to your device,

including the product documentation.

3.3 Scope of delivery

CLD132

The scope of delivery of the "compact version" with PROFIBUS comprises:

• Compact measuring system Smartec with integrated sensor

• Terminal strip set

• Bellows (for device version -*GE1*****)

• Operating Instructions BA00207C

• Operating Instructions for field communication with PROFIBUS BA00213C

• M12 connector (for device version -******PF*)

The scope of delivery of the "Remote version" with PROFIBUS includes:

• Smartec transmitter

• CLS52 inductive conductivity sensor with fixed cable

• Terminal strip set

• Bellows (for device version -*GE1*****)

• Operating Instructions BA00207C

• Operating Instructions for field communication with PROFIBUS BA00213C

• M12 connector (for device version -******PF*)

CLD134

The scope of delivery of the "compact version" with PROFIBUS comprises:

• Smartec compact measuring system with embedded sensor

• Terminal strip set

• Operating Instructions BA00401C

• Operating Instructions for field communication with PROFIBUS BA00213C

• M12 connector (for device version -******PF*)

The scope of delivery of the "remote version" comprises:

• Smartec transmitter

• CLS54 inductive conductivity sensor with fixed cable

• Terminal strip set

• Operating Instructions BA00401C

• Operating Instructions for field communication with PROFIBUS BA00213C

• M12 connector (for device version -******PF*)

The scope of delivery of the "transmitter excluding sensor" version comprises:

• Smartec CLD134 transmitter

• Terminal strip set

• Operating Instructions BA00401C/07/EN

• Operating Instructions for field communication with PROFIBUS BA00213C

• M12 connector (for device version -******PF*)

Smartec CLD132/134 PROFIBUS PA/DP Installation

Endress+Hauser 9

4 Installation

4.1 System architecture

A complete measuring system consists of

• CLD132 or CLD134 transmitter with PROFIBUS PA or DP

• Segment coupler (PA only)

• PROFIBUS bus terminator

• Cabling incl. bus distributor

• Programmable Logic Controller (PLC) or PC with FieldCare or DeviceCare

12 3

ENDRESS+HAUSER

SMARTECS

ALARM

CAL

–

A0052586

 1 Measuring systems with PROFIBUS interface

1 PC with PROFIBUS interface and operating program

2 PLC

3 Segment coupler

4 CLD132 or CLD134 PROFIBUS PA remote version with CLS52 or CLS54

5 CLD132 or CLD134 PROFIBUS PA compact version

6 Terminating resistor

7 CLD132 or CLD134 PROFIBUS PA compact version

The maximum number of transmitters in a bus segment is determined by their current

consumption, the bus coupler power and the required bus length.

Guidelines for planning and commissioning PROFIBUS DP/PA, BA00034S

Installation Smartec CLD132/134 PROFIBUS PA/DP

10 Endress+Hauser

4.2 Mounting the measuring device

‣Carry out installation in accordance with the operating instructions.

Operating Instructions for Smartec CLD132, BA00207C

Operating Instructions for Smartec CLD134, BA00401C

4.3 Post-installation check

1. After installation, check the measuring system for damage.

2. Check that the sensor is aligned with the flow direction of the medium.

3. Check that the coil former of the sensor is completely wetted by the medium.

Andere Handbücher für SmarTec S CLD 132 PROFIBUS-PA

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Endress+Hauser Messgerät Handbücher

Endress+Hauser

Endress+Hauser Proline t-mass A 150 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Micropilot FMR20 Technische Daten

Endress+Hauser

Endress+Hauser Proline Promass E 200 Technische Daten

Endress+Hauser

Endress+Hauser Stamolys CA71SI Series Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag H 300 Handbuch

Endress+Hauser

Endress+Hauser Levelflex M FMP40 Handbuch

Endress+Hauser

Endress+Hauser RIA46 Technische Daten

Endress+Hauser

Endress+Hauser Levelflex M FMP40 Technische Daten

Endress+Hauser

Endress+Hauser Proline Promass 40E Handbuch

Endress+Hauser

Endress+Hauser Proline Promag W 500 Handbuch

Endress+Hauser

Endress+Hauser Tankvision Multi Scan NXA83B Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD72 Handbuch

Endress+Hauser

Endress+Hauser Ceraphant T PTC31 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Micropilot M FMR250 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Silopilot FMM50 Bedienungsanleitung

Endress+Hauser

Endress+Hauser FMU 40 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag H 500 Handbuch

Endress+Hauser

Endress+Hauser SS500 Firmware-Update

Endress+Hauser

Endress+Hauser Levelflex FMP55 Technische Daten

Endress+Hauser

Endress+Hauser Proservo NMS80 Gebrauchsanweisung

Endress+Hauser

Endress+Hauser Prosonic S FMU95 PROFIBUS DP Bedienungsanleitung

Endress+Hauser

Endress+Hauser nivotester FTC 420 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Levelflex FMP50 Montageanleitung

Endress+Hauser

Endress+Hauser Cerabar S PMP71 with MID Part Certificate Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung

Konica Minolta

Konica Minolta BC-10 Plus Bedienungsanleitung

Uniks

Uniks C126 Bedienungsanleitung