Endress+Hauser Micropilot FWR30 Bedienungsanleitung

Products Solutions Services

Operating Instructions

Micropilot FWR30

Free space radar

Battery-operated radar sensor for remote monitoring of

levels

BA01991F/00/EN/01.19

71454862

2019-12-02

Micropilot FWR30

2 Endress+Hauser

Order code:

Ext. ord. cd.:

Ser. no.:

www.endress.com/deviceviewer Endress+Hauser

Operations App

XXXXXXXXXXXX

XXXXX-XXXXXX

XXX.XXXX.XX

Serial number

A0023555

• Make sure the document is stored in a safe place such that it is always available when

working on or with the device.

• To avoid danger to individuals or the facility, read the "Basic safety instructions" section

carefully, as well as all other safety instructions in the document that are specific to

working procedures.

• The manufacturer reserves the right to modify technical data without prior notice. Your

Endress+Hauser Sales Center will supply you with current information and updates to

these instructions.

Micropilot FWR30 Table of contents

Endress+Hauser 3

Table of contents

1 About this document ................ 4

1.1 Document function ..................... 4

1.2 Symbols ............................. 4

1.3 Documentation ........................ 5

2 Basic safety instructions ............ 6

2.1 Requirements for the personnel ............ 6

2.2 Designated use ........................ 6

2.3 Occupational safety ..................... 6

2.4 Operational safety ...................... 6

2.5 Product safety ......................... 7

2.6 IT security ............................ 7

3 Product description ................ 8

3.1 Product design ........................ 8

4 Incoming acceptance and product

identification ...................... 9

4.1 Incoming acceptance .................... 9

4.2 Product identification ................... 9

4.3 Storage and transport ................... 9

5 Installation ....................... 10

5.1 Mounting the measuring device ........... 10

5.2 Post-installation check ................. 11

6 Electrical connection .............. 12

6.1 Connecting the measuring device .......... 12

7 Operation options ................. 13

7.1 Overview of operation options ............ 13

8 Commissioning ................... 14

8.1 Preparatory steps ..................... 14

8.2 Function check ....................... 14

8.3 Powering up the measuring device ......... 14

8.4 Configuration management .............. 14

8.5 Protecting settings from unauthorized

access .............................. 14

9 Operation ........................ 15

9.1 Initiating measurement ................. 15

9.2 Reading measured values ................ 15

9.3 Showing data logging .................. 15

9.4 Use cases ............................ 15

10 Diagnostics and troubleshooting ... 17

10.1 Diagnostic information via light emitting

diodes ............................. 17

11 Maintenance ..................... 18

11.1 Maintenance tasks .................... 18

12 Repair ............................ 19

12.1 Spare parts .......................... 19

12.2 Return .............................. 19

12.3 Disposal ............................ 19

13 Accessories ....................... 20

13.1 Device-specific accessories ............... 20

14 Technical data .................... 21

14.1 Input .............................. 21

14.2 Output ............................. 21

14.3 Environment ........................ 22

14.4 Process ............................. 22

Index .................................. 23

About this document Micropilot FWR30

4 Endress+Hauser

1 About this document

1.1 Document function

These Operating Instructions contain all the information that is required in various phases

of the life cycle of the device: from product identification, incoming acceptance and

storage, to mounting, connection, operation and commissioning through to

troubleshooting, maintenance and disposal.

1.2 Symbols

1.2.1 Safety symbols

DANGER

This symbol alerts you to a dangerous situation. Failure to avoid this situation will result in

serious or fatal injury.

WARNING

This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in

serious or fatal injury.

CAUTION

This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in

minor or medium injury.

NOTICE

This symbol contains information on procedures and other facts which do not result in

personal injury.

1.2.2 Communication symbols

1.2.3 Symbols for certain types of information

Permitted:

Procedures, processes or actions that are permitted.

Forbidden:

Procedures, processes or actions that are forbidden.

Micropilot FWR30 About this document

Endress+Hauser 5

Additional information:

Reference to documentation:

Reference to page:

Series of steps:

Result of an individual step:

1.2.4 Symbols in graphics

Item numbers: 1, 2, 3 ...

Series of steps:

Views: A, B, C, ...

1.3 Documentation

All available documents can be downloaded using:

• the serial number of the device (see cover page for description) or

• the data matrix code of the device (see cover page for description) or

• the "Downloads" area of the website www.endress.com

1.3.1 Supplementary device-dependent documentation

Additional documents are supplied depending on the device version ordered: Always

comply strictly with the instructions in the supplementary documentation. The

supplementary documentation is an integral part of the device documentation.

Basic safety instructions Micropilot FWR30

6 Endress+Hauser

2 Basic safety instructions

2.1 Requirements for the personnel

The personnel for installation, commissioning, diagnostics and maintenance must fulfill

the following requirements:

‣Trained, qualified specialists must have a relevant qualification for this specific function

and task

‣Are authorized by the plant owner/operator

‣Are familiar with federal/national regulations

‣Before beginning work, the specialist staff must have read and understood the

instructions in the Operating Instructions and supplementary documentation as well as

in the certificates (depending on the application)

‣Follow instructions and comply with conditions

The operating personnel must fulfill the following requirements:

‣Being instructed and authorized according to the requirements of the task by the

facility's owner-operator

‣Following the instructions in these Operating Instructions

2.2 Designated use

The Micropilot FWR30 is a low-power cellular radio sensor gateway.

Application:

Wireless drop-in networking in industrial environments for remote monitoring of levels.

2.2.1 Incorrect use

The manufacturer is not liable for damage caused by improper or non-designated use.

Verification for borderline cases:

‣For special fluids and fluids for cleaning, Endress+Hauser is glad to provide assistance

in verifying the corrosion resistance of fluid-wetted materials, but does not accept any

warranty or liability.

2.3 Occupational safety

For work on and with the device:

‣Wear the required personal protective equipment according to federal/national

regulations.

2.4 Operational safety

Risk of injury!

‣Operate the device only if it is in proper technical condition, free from errors and faults.

‣The operator is responsible for the interference-free operation of the device.

Modifications to the device

Unauthorized modifications to the device are not permitted and can lead to unforeseeable

dangers:

‣If, despite this, modifications are required, consult with Endress+Hauser.

Repair

To ensure continued operational safety and reliability:

‣Carry out repairs on the device only if they are expressly permitted.

Micropilot FWR30 Basic safety instructions

Endress+Hauser 7

‣Observe federal/national regulations pertaining to the repair of an electrical device.

‣Use original spare parts and accessories from Endress+Hauser only.

Hazardous area

To avoid danger to individuals or the facility when the device is used in the approval-

related area (e. g. explosion protection, pressure vessel safety):

‣Check the nameplate to verify if the device ordered can be put to its intended use in the

approval-related area.

‣Observe the specifications in the separate supplementary documentation that is an

integral part of these Instructions.

2.5 Product safety

This measuring device is designed in accordance with good engineering practice to meet

state-of-the-art safety requirements, has been tested, and left the factory in a condition in

which it is safe to operate.

It meets general safety standards and legal requirements. It also complies with the EC

directives listed in the device-specific EC Declaration of Conformity. Endress+Hauser

confirms this by affixing the CE mark to the device.

2.6 IT security

We only provide a warranty if the device is installed and used as described in the

Operating Instructions. The device is equipped with security mechanisms to protect it

against any inadvertent changes to the device settings.

IT security measures in line with operators' security standards and designed to provide

additional protection for the device and device data transfer must be implemented by the

operators themselves.

Product description Micropilot FWR30

8 Endress+Hauser

3 Product description

3.1 Product design

The Micropilot FWR30 is powered by an internal battery. The waterproof housing contains

a sensor. The sensor records data (sensor measured values) from its environment. The

device reports these data to the Netilion Cloud Service via a low-bandwidth cellular radio

connection.

Micropilot FWR30 Incoming acceptance and product identification

Endress+Hauser 9

4 Incoming acceptance and product

identification

4.1 Incoming acceptance

DELIVERY NOTE

A0041102

4.2 Product identification

4.2.1 Manufacturer address

Endress+Hauser SE+Co. KG

Hauptstraße 1

79689 Maulburg, Germany

Address of the manufacturing plant: See nameplate.

4.3 Storage and transport

4.3.1 Storage temperature

• Without battery: –20 to +60 °C (–4 to +140 °F)

• With battery: 0 to +30 °C (+32 to +86 °F)

The battery discharges very slowly within the specified temperature range.

Installation Micropilot FWR30

10 Endress+Hauser

5 Installation

5.1 Mounting the measuring device

5.1.1 Mounting location

Indoors or outdoors.

Installation on vertical pipes

A0040689

Installation with mounting bracket pipe/IBC.

Installation on plastic IBC tanks with tubular cage or mesh frame

Installation with "Mounting kit pipe / IBC".

The mounting kit pipe/IBC is also suitable for IBCs with mesh.

Installation on ceiling or walls

A0040688

Installation with "Mounting bracket wall/ceiling".

Individual installation

The measuring device can also be installed without using the two mounting brackets. A

bracket can be attached to the underside using the screw thread. The measuring device can

Andere Handbücher für Micropilot FWR30

Inhaltsverzeichnis

Andere Endress+Hauser Radar Handbücher

Endress+Hauser

Endress+Hauser Micropilot FMR51 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Levelflex M FMP45 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Levelflex FMP56 Handbuch

Endress+Hauser

Endress+Hauser Levelflex FMP53 Bedienungsanleitung

Endress+Hauser

Endress+Hauser micropilot M FMR 240 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Levelflex FMP56 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Micropilot M FMR244 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Micropilot FMR10 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Micropilot S FMR530 Technische Daten

Endress+Hauser

Endress+Hauser Micropilot FMR67B Technische Daten

Endress+Hauser

Endress+Hauser Micropilot FMR67B Bedienungsanleitung

Endress+Hauser

Endress+Hauser Micropilot FMR67B Bedienungsanleitung

Endress+Hauser

Endress+Hauser Micropilot NMR81 Gebrauchsanweisung

Endress+Hauser

Endress+Hauser Micropilot FMR56 Technische Daten

Endress+Hauser

Endress+Hauser Micropilot M FMR250 Technische Daten

Endress+Hauser

Endress+Hauser FOUNDATION Fieldbus Micropilot FMR50 Technische Daten

Endress+Hauser

Endress+Hauser Levelflex FMP53 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Levelflex FMP51 Technische Daten

Endress+Hauser

Endress+Hauser Micropilot FMR60B PROFIBUS PA Handbuch

Endress+Hauser

Endress+Hauser Micropilot M FMR245 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Levelflex FMP53 FOUNDATION Fieldbus Technische Daten

Endress+Hauser

Endress+Hauser HART Micropilot S FMR533 Technische Daten

Endress+Hauser

Endress+Hauser Levelflex M FMP45 Bedienungsanleitung

Endress+Hauser

Endress+Hauser levelflex M FMP 40 Bedienungsanleitung

Beliebte Radar Handbücher anderer Marken

SAW D2L

SAW D2L Valentine One Gen2 Bedienungsanleitung

Raymarine

Raymarine Raytheon R20X Bedienungsanleitung

Simrad

Simrad CA34 Bedienungsanleitung

ECHOMAX

ECHOMAX Active-X-Band Bedienungsanleitung

AGD

AGD 340 Bedienungsanleitung

Kustom Signals

Kustom Signals Eagle 3 Bedienungsanleitung

SYMEO

SYMEO STU Bedienungsanleitung

Axis

Axis D2110-VE Bedienungsanleitung

MALA

MALA MIRA Bedienungsanleitung

Emerson

Emerson ROSEMOUNT 5300 Bedienungsanleitung

Rosemount

Rosemount 5300 Series Bedienungsanleitung

TERMA

TERMA SCANTER 5102 Bedienungsanleitung

GSSI

GSSI UtilityScan Bedienungsanleitung

Acconeer

Acconeer A111 Bedienungsanleitung

Crosley

Crosley CR37 Bedienungsanleitung

AGD

AGD 318 Bedienungsanleitung

Cobra

Cobra SLR 650G Bedienungsanleitung

Faselase

Faselase D10 Bedienungsanleitung