Endress+Hauser Thermophant T TTR31 Bedienungsanleitung

BA229R/09/en/03.06

71025405

Release 01.02.01

Operating manual

Thermophant®T TTR31, TTR35

Temperature switch

Brief overview

Using the following short form instructions you can commission your system easily and swiftly:

Safety instructions →Page 4

Installation →Page 6

Wiring →Page 9

Operation →Page 10

Display and operating elements

On-site operation

Operation with PC and configuration software

Trouble-shooting →Page 25

Endress+Hauser 3

TTR31, TTR35

Table of contents

1 Safety instructions . . . . . . . . . . 4

1. 1 Designated use . . . . . . . . . . . . . . . . . . . . . 4

1. 2 Installation, commissioning and operation . 4

1. 3 Operational safety . . . . . . . . . . . . . . . . . . . 4

1. 4 Return . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2 Device identification. . . . . . . . . 5

2. 1 Nameplate . . . . . . . . . . . . . . . . . . . . . . . . . 5

3 Installation . . . . . . . . . . . . . . . . 6

3. 1 Incoming acceptance, storage . . . . . . . . . . 6

3. 2 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . 6

3. 3 Process connection . . . . . . . . . . . . . . . . . . 7

3. 4 Installation instructions . . . . . . . . . . . . . . . 8

4 Wiring. . . . . . . . . . . . . . . . . . . . 9

4. 1 DC voltage version with M12 connector . . 9

4. 2 DC voltage version with valve connector . . 9

5 Operation . . . . . . . . . . . . . . . . 10

5. 1 On-site operation . . . . . . . . . . . . . . . . . . . 10

5. 2 Operation with PC and Readwin® 2000 . 18

6 Accessories. . . . . . . . . . . . . . . 19

6. 1 Adapter concept for TTR35 . . . . . . . . . . . 19

6.3 Electrical connection . . . . . . . . . . . . . . . . 23

6.4 Configuration kit . . . . . . . . . . . . . . . . . . . 24

7 Trouble-shooting . . . . . . . . . . 25

7. 1 Errors and warnings . . . . . . . . . . . . . . . . 25

7. 2 Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

7. 3 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . 26

7. 4 Change status (release) . . . . . . . . . . . . . . 26

7. 5 Release history . . . . . . . . . . . . . . . . . . . 26

8 The most important

technical data . . . . . . . . . . . . . 28

8. 1 Power supply . . . . . . . . . . . . . . . . . . . . . 28

8. 2 Output . . . . . . . . . . . . . . . . . . . . . . . . . . 28

8. 3 Operating conditions . . . . . . . . . . . . . . . . 28

9 Dangerous good sheet . . . . . . .30

Safety instructions TTR31, TTR35

4Endress+Hauser

1 Safety instructions

1. 1 Designated use

The Thermophant®T is a temperature switch for monitoring, displaying and regulating process

temperatures. The device has been safely built with state-of-the-art technology and meets the

applicable requirements and EC Directives. It can, however, be a source of danger if used

incorrectly or for anything other than the designated use.

1. 2 Installation, commissioning and operation

Installation, electrical connection, commissioning, operation and maintenance of the measuring

system must be carried out by trained, qualified specialists authorised to perform such work by

the facility's owner-operator. The specialist must have read and understood these Operating In-

structions and must follow the instructions they contain. The device may only be modified and

repair work carried out if this is explicitly permitted in the Operating Instructions. Damaged de-

vices which could be a source of danger may not be commissioned and must be labelled and

identified as defective.

1. 3 Operational safety

• Functional safety

The Thermophant®T temperature switches were developed according to the standards IEC

61508 and IEC 61511-1 (FDIS). The device version with PNP switch output and additional

analog output is equipped with fault detection and fault prevention facilities within the

electronics and software.

•Ex-area

The Thermophant®T is not approved for use in Ex-areas.

1. 4 Return

The following procedures must be carried out before a device is returned to Endress+Hauser:

• Always enclose a fully completed “Declaration of Contamination” form with the device. Only

then can Endress+Hauser transport and examine a returned device. A copy of the “Declara-

tion of Contamination” can be found on the second last page of these Operating Instructions.

• Remove all fluid residues. This is particularly important if the fluid is hazardous to health, e.g.

flammable, toxic, caustic, carcinogenic, etc.

#Warning!

Do not return a measuring device if you are not absolutely certain that all traces of hazardous

substances have been removed, e.g. substances which have penetrated crevices or diffused

through plastic.

TTR31, TTR35 Device identification

Endress+Hauser 5

2 Device identification

2. 1 Nameplate

To identify your device, compare the complete order code and the version information on the

delivery papers with the data on the nameplate.

T09-TTR31xxx-18-xx-xx-xx-000

Fig. 1: Nameplate for device identification (as example)

!Note!

The release number indicates the change status of the device. A change in the last two figures

does not have any affect on the compatibility - see also →Chap. 7.

mOrder code rConnection diagram

nSerial number sMeasuring range

oTAG number tAmbient temperature

pRelease number (change status) uDegree of protection

qConnection values vApprovals

Installation TTR31, TTR35

6Endress+Hauser

3 Installation

3. 1 Incoming acceptance, storage

• Incoming acceptance:

Check the packaging and the device for damage. Check that the goods delivered are complete

and nothing is missing.

•Storage:

Storage temperature -40 °C to +85 °C (-40 °F to +185 °F).

3. 2 Dimensions

T09-TTR31xxx-06-xx-xx-en-000

Fig. 2: Dimensions in mm (inches)

Version L in 50, 100 and 200 mm (1.97, 3.94 and 7.87")

M 12x1 connector as per IEC 60947-5-2

M 16x1.5 or ½ NPT valve plug as per DIN 43650A/ISO 4400

ø 42.3 (1.66)

97.1 (3.82)

42.1 (1.66)

38.7 (1.52) 38.7 (1.52)

36 (1.42)

24 (0.95) 24 (0.95)

52 (2.05)

ø 38.5 (1.52)

M 16x1.5/½NPT

M 12x1

LL L

øøø

6 (0.24) 6 (0.24) 6 (0.24)

ø6 (0.24)

ø14 (0.55)

with neck

35 (1.38)

TTR31, TTR35 Installation

Endress+Hauser 7

3. 3 Process connection

The following table illustrates the versions of Thermophant®T.

TTR31 TTR35

T09-TTR31xxx-17-xx-xx-en-000

Field of applica-

tion

Monitoring, display and control of process temperatures Monitoring, display and con-

trol of process temperatures

in hygienic processes

Process connec-

tion

Item A

Version without proc-

ess connection (’w’).

Suitable welding

bosses and coupling

(see section 6)

Item B

Version with thread

process connection

ANSI ¼" NPT

(m= AF14) and

½" NPT (m= AF27)

Item C

Version with thread

process connection

G ¼A (n= AF14) and

G ½A (n= AF27) as

per ISO 228

Item D

Adapter concept - version

with M24x1.5 thread for

adapters with process con-

nection for hygienic processes

(see section 6.1.2)

Sensor length L Version L in 50, 100 and 200 mm (1.97, 3.94 and 7.87")

Measuring range -50 °C to +150 °C (-58 °F to 302 °F)

Installation TTR31, TTR35

8Endress+Hauser

3. 4 Installation instructions

T09-TTR31xxx-11-00-xx-xx-000

Fig. 3: Possible installation options for temperature monitoring in pipes

mTTR31

nTTR35 for use in hygienic processes

Mounting instructions:

• Installation at angle pieces, against the direction of flow (Fig. 3, Item A)

• Installation in smaller pipes, inclined against the direction of flow (Fig. 3, Item B)

• Installation vertical to the direction of flow (Fig. 3, Item C)

• The on-site display can be rotated electronically 180° −see section 5. 1 "On-site operation"

• The housing can be rotated up to 310°

"Caution!

Do no thread into process connection by turning housing. Always use a wrench on the process

connnection fluts (→Fig. 3, Pos. 1) to tighten the sensor into the process connection.

TTR31, TTR35 Wiring

Endress+Hauser 9

4 Wiring

4. 1 DC voltage version with M12 connector

P01-PTx3xxxx-04-xx-xx-xx-002

Fig. 4: Thermophant® T with M12x1 connector

A1: 1x PNP switch output

A2: PNP switch outputs R1 and m(R2)

A2’: PNP switch outputs R1 and m (diagnosis/break contact with adjustment "DESINA")

A3: PNP switch output with additional analog output

A3’: PNP switch output with additional analog output (PIN assignment with "DESINA" setting)

"Caution!

To avoid the analog input damaging of a PLC, do not connect the a active PNP switch output of

the device to the 4...20 mA input of a PLC.

!Note!

DESINA (→Chap. 5.1.3 Basic settings):

R2 = Diagnosis/break contact (more informations about DESINA see www.desina.de)

4. 2 DC voltage version with valve connector

P01-PTx3xxxx-04-xx-xx-xx-003

Fig. 5: Thermophant®T with M 16x1.5 or ½ NPT valve plug

B: 1x PNP switch output

Operation TTR31, TTR35

10 Endress+Hauser

5 Operation

5. 1 On-site operation

The Thermophant®T is operated by means of three keys. The digital display and the light

emitting diodes (LED) support navigation in the operating menu.

T09-TTR31xxx-19-xx-xx-en-001

Fig. 6: Position of operating elements and possibilities for display

Digital display illumination:

–White=OKstatus

– Red = error status

Andere Handbücher für Thermophant T TTR31

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Endress+Hauser Schalten Handbücher

Endress+Hauser

Endress+Hauser FEC 22 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Nivotester FTC 422 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Soliswitch FTE20 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquicap M FTI51 Bedienungsanleitung

Endress+Hauser

Endress+Hauser nivotester FTC 420 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Nivotester FTL 375 N 3 Series Bedienungsanleitung

Endress+Hauser

Endress+Hauser Flowphant T DTT31 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Nivotester FTR325 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Flowphant T DTT31 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquiphant FTL51B Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquiphant FTL64 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Flowphant T DTT31 Bedienungsanleitung

Endress+Hauser

Endress+Hauser nivotester FTL 325 P Handbuch

Endress+Hauser

Endress+Hauser OTR31 Bedienungsanleitung

Endress+Hauser

Endress+Hauser minicap FTC 262 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquiphant M FTL51 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cerabar M Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquiphant FTL51B Technische Daten

Endress+Hauser

Endress+Hauser Proline Promag 55 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquiphant FTL64 Technische Daten

Endress+Hauser

Endress+Hauser Liquiphant FTL33 IO-Link Bedienungsanleitung

Endress+Hauser

Endress+Hauser Nivotester FTC325 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Soliphant T FTM20 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch