Endress+Hauser Liquisys M CXM 223 Bedienungsanleitung

BA208C/07/en/07.02

51501609

Supplement to

BA 193C/07/en

BA 194C/07/en

BA 199C/07/en

BA 200C/07/en

BA 214C/07/en

BA 246C/07/en

HART

Field Communication with

Liquisys M CXM 223 / 253

Operating Instructions

Liquisys M CXM 223 / 253 HART

2Endress+Hauser

Liquisys M CXM 223 / 253 HART

Endress+Hauser 3

Table of contents

1 Safety instructions . . . . . . . . . . . . . . . . . 4

1.1 Notes on safety conventions and icons . . . . . 4

1.2 Designated use . . . . . . . . . . . . . . . . . . . . . . . . 5

1.3 Installation, Commissioning, Operation . . . . . . 5

1.4 Operational safety . . . . . . . . . . . . . . . . . . . . . . 5

2 Identification . . . . . . . . . . . . . . . . . . . . . . 6

2.1 Device designation . . . . . . . . . . . . . . . . . . . . . 6

2.2 Scope of delivery . . . . . . . . . . . . . . . . . . . . . . . 6

2.3 Certificates and approvals . . . . . . . . . . . . . . . 6

3 Installation . . . . . . . . . . . . . . . . . . . . . . . . . 7

3.1 System architecture . . . . . . . . . . . . . . . . . . . . . 7

3.2 Post-installation check . . . . . . . . . . . . . . . . . . . 7

4 Electrical connection . . . . . . . . . . . . . . 8

4.1 Quick connection guide . . . . . . . . . . . . . . . . . . 8

4.2 Connecting the HART® handheld terminal

DXR 275 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

4.3 Connecting a PC with operating programme . 9

4.4 Post-connection check . . . . . . . . . . . . . . . . . 10

5 Operation . . . . . . . . . . . . . . . . . . . . . . . . . 11

5.1 Display and operating elements . . . . . . . . . . 11

5.2 Operation via the HART® handheld terminal

DXR 275 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

5.3 Operation via Commuwin II . . . . . . . . . . . . . . 12

5.4 HART® commands . . . . . . . . . . . . . . . . . . . . . 18

6 Commissioning . . . . . . . . . . . . . . . . . . . 24

6.1 Function check . . . . . . . . . . . . . . . . . . . . . . . . 24

6.2 Setting the device address . . . . . . . . . . . . . . . 24

7 Maintenance . . . . . . . . . . . . . . . . . . . . . . 25

8 Troubleshooting . . . . . . . . . . . . . . . . . . 26

8.1 Device status / error messages . . . . . . . . . . . 26

9 Accessories . . . . . . . . . . . . . . . . . . . . . . . 32

10 Technical data . . . . . . . . . . . . . . . . . . . . 33

10.1 Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

10.2 Electrical connection . . . . . . . . . . . . . . . . . . . 33

10.3 Human interface . . . . . . . . . . . . . . . . . . . . . . 33

10.4 Documentation . . . . . . . . . . . . . . . . . . . . . . . . 33

1 Safety instructions Liquisys M CXM 223 / 253 HART

4Endress+Hauser

1 Safety instructions

1.1 Notes on safety conventions and icons

General safety instructions

Electrical symbols

Warning!

This symbol alerts you to hazards which could cause serious injuries as well as damage to the instrument if

ignored.

Caution!

This symbol alerts you to possible faults which could arise from incorrect operation. They could cause

damage to the instrument if ignored.

Note!

This symbol indicates important items of information.

DC voltage

A terminal at which DC voltage is applied or through which DC flows.

AC voltage

A terminal at which (sine-form) AC voltage is applied or through which AC flows.

)

Ground connection

A grounded terminal, which, from the user’s point of view, is already grounded using a ground system.

Protective earth terminal

A terminal which must be grounded before other connections may be set up.

Equipotential connection

A connection which must be connected to the grounding system of the equipment. This can be, for

example, a potential matching line of a star-shaped grounding system, depending on national or company

practice.

Double insulation

The equipment is protected with double insulation.

Alarm relay

Input

Output

Liquisys M CXM 223 / 253 HART 1 Safety instructions

Endress+Hauser 5

1.2 Designated use

These Operating Instructions were specially designed for use with transmitters from the

Liquisys M CXM 223 / 253 family. They contain specific information on instruments

equipped with the HART®interface (Highway Adressable Remote Transducer). The

HART®interface allows the device to be operated via the handheld terminal DXR 275

or, using the operating programme Commuwin II, at a PC by means of a HART®modem,

e.g. Commubox FXA 191.

Any other use than the one described here compromises the safety of persons and the

entire measuring system and is therefore not permitted.

The manufacturer is not liable for damage caused by improper or non-designated use.

1.3 Installation, Commissioning, Operation

Please note the following items:

•Installation, electrical connection, commissioning, operation and maintenance of the

measuring system must only be carried out by trained technical personnel.

The technical personnel must be authorised for the specified activities by the system

operator.

•Technical personnel must have read and understood theses Operating Instructions

and must adhere to them.

•Before commissioning the entire measuring point, check all the connections for

correctness. Ensure that electrical cables and hose connections are not damaged.

•Do not operate damaged products and secure them against unintentional

commissioning.

•Measuring point faults may only be rectified by authorised and specially trained

personnel.

•If faults can not be rectified, the products must be moved from service and secured

against unintentional commissioning.

•Repairs not described in these Operating Instructions may only be carried out at the

manufacturer’s or by the Endress+Hauser service organisation.

1.4 Operational safety

The transmitter has been designed and tested according to the state of the art and left

the factory in perfect functioning order.

Relevant regulations and European standards have been met.

As the user, you are responsible for complying with the following safety conditions:

•Installation instructions

•Local standards and regulations

2 Identification Liquisys M CXM 223 / 253 HART

6Endress+Hauser

2 Identification

2.1 Device designation

2.1.1 Nameplate

Identify your device using the product structure in the standard Operating Instructions

for the device, (s. chap. 2.2).

2.2 Scope of delivery

Check the scope of delivery using your order and the delivery documents for:

•Completeness

•Instrument type and version acc. to the nameplate, (s. chap. 2.1.1)

•Accessories, (s. chap. 9)

•Standard Operating Instructions BA 193C/07/en (CLM), BA 194C/07/en (CPM),

BA 199C/07/en (COM), BA 200C/07/en (CUM), BA 214C/07/en (CCM),

BA 246C/07/en (COM F)

•HART®Operating Instructions BA 208C/07/en

2.3 Certificates and approvals

Declaration of conformity

The transmitter complies with the legal demands of the harmonized European

standards. Endress+Hauser certifies the compliance with the standards by using the

mark.

Fig. 1: Example of a nameplate of the Liquisys M CXM 223 / 253 transmitter

with HART®communication.

Liquisys M CXM 223 / 253 HART 3 Installation

Endress+Hauser 7

3Installation

3.1 System architecture

The complete system consists of the following components:

•Transmitter Liquisys M CXM 223 / 253 (1)

•HART®handheld terminal DXR 275 (2)

•HART®modem Commubox FXA 191 (3)

•PC with operating programme Commuwin II (4)

•Recorder (5)

Fig. 2: System architecture Liquisys M CXM 223 / 253 HART®

3.2 Post-installation check

After installing the transmitter, carry out the following checks:

Instrument status and specifications Note

Is the transmitter damaged? Visual inspection

Installation Note

Are the measuring point number and the labelling correct? Visual inspection

Process environment/conditions Note

Is the transmitter protected against rainfall and direct

sunlight?

For outdoor installation, the weather

protection cover CYY 101 is required,

(see Accessories).

4 Electrical connection Liquisys M CXM 223 / 253 HART

8Endress+Hauser

4 Electrical connection

4.1 Quick connection guide

4.1.1 Wiring diagram

Users have the following connection options at their disposal:

•Direct connection to the transmitter by means of current output 1

(terminals 31 / 32)

•Connection by means of the 4...20 mA circuit.

Note!

•The measuring circuit’s minimum load in current output 1 must be at least 250 Ω.

Fig. 3: Electrical connection of Liquisys M CPM 253 HART®

Fig. 4: Electrical connection of Liquisys M CPM 223 HART®

Liquisys M CXM 223 / 253 HART 4 Electrical connection

Endress+Hauser 9

4.2 Connecting the HART®handheld terminal

DXR 275

You require the HART®handheld terminal DXR 275 for operation using a handheld

terminal. The HART®handheld terminal DXR 275 is connected via the current output 1

of the transmitter.

For connecting, please refer also to the documentation issued by the HART®

Communication Foundation, and in particular the booklet HCF LIT 20: “HART®,

A Technical Overview”.

Fig. 5: Electrical connection of the HART®handheld terminal DXR 275

1= current output 1 of the transmitter, 2 = power supply, 3 = screening, 4 = other switching units or PLC with

passive input, 5 = HART®handheld terminal DXR 275

4.3 Connecting a PC with operating programme

You require a HART®modem Commubox FXA 191 for connecting a personal computer

with operating programme Commuwin II. The HART®modem Commubox FXA 191 is

connected via the current output 1 of the transmitter.

For connecting please refer also to the documentation issued by the HART®

Communication Foundation, and in particular the booklet HCF LIT 20: “HART®,

A Technical Overview”.

Fig. 6: Electrical connection of the Commubox FXA 191

1 = current output 1 of the transmitter, 2 = power supply, 3 = screening, 4 = other switching units or PLC with

passive input, 5 = PC with operating software, 6 = HART®modem Commubox FXA 191

4 Electrical connection Liquisys M CXM 223 / 253 HART

10 Endress+Hauser

Note!

•The Commuwin II and HART®handheld terminal DXR 275 can only be operated

simultaneously if:

–one device is set as the primary master and the other as the secondary master

–neither master is constantly communicating.

4.4 Post-connection check

After wiring up the electrical connection of the measuring instrument, carry out the

following checks:

Instrument status and specifications Note

Is the measuring instrument or the cable damaged externally? Visual inspection

Electrical connection Note

Does the supply voltage match the specifications on the

nameplate?

100 / 115 / 230 V AC

24 V AC / DC

Do the cables used fulfil the required specifications? Use genuine E+H cables for

sensor connection, see

Accessories chapter in the

standard Operating Instructions

Are the mounted cables strain-relieved?

Is the cable type route completely isolated? Along the whole cable length,

run the power supply and signal

line cables separately to avoid

any mutual influence. Cable

channels are best.

No loops and cross-overs in the cable run?

Are the power supply and signal cable correctly connected

according to the wiring diagram?

Are all the screw terminals tightened?

For connection with potential matching (PML):

Is the PML connected to the measuring medium?

Note!

During calibration, insert the

PML into the buffer solution.

Are all the cable entries installed, tightened and sealed?

Cable run with "water sag"?

"Water sag": cable circuit

hanging down so that water can

drip off.

Are all the housing covers installed and tightened? Check seals for damage.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Endress+Hauser Sender Handbücher

Endress+Hauser

Endress+Hauser Deltabar M PMD55 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline 500 Technische Daten

Endress+Hauser

Endress+Hauser Proline 500 PROFIBUS PA Technische Daten

Endress+Hauser

Endress+Hauser CM14 Bedienungsanleitung

Endress+Hauser

Endress+Hauser iTEMP TMT82 Technische Daten

Endress+Hauser

Endress+Hauser iTEMP TMT85 Bedienungsanleitung

Endress+Hauser

Endress+Hauser PROFIBUS DP Proline 100 Technische Daten

Endress+Hauser

Endress+Hauser iTEMP TMT162 Technische Daten

Endress+Hauser

Endress+Hauser iTEMP TMT86 Bedienungsanleitung

Endress+Hauser

Endress+Hauser cerabar S PROFIBUS-PA Bedienungsanleitung

Endress+Hauser

Endress+Hauser Prosonic S FMU90 Bedienungs- und Montageanleitung

Endress+Hauser

Endress+Hauser Omnigrad TMT146 Bedienungsanleitung

Endress+Hauser

Endress+Hauser CUM 740 Bedienungsanleitung

Endress+Hauser

Endress+Hauser iTEMP TMT80 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Prosonic S FMU90 Handbuch

Endress+Hauser

Endress+Hauser Liquisys M CLM223F Bedienungsanleitung

Endress+Hauser

Endress+Hauser iTEMP TMT82 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Commubox FXA291 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Bedienungsanleitung

Endress+Hauser

Endress+Hauser RMA42 Technische Daten

Endress+Hauser

Endress+Hauser Liquisys M CPM223 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cerabar S PMC71 Bedienungsanleitung

Endress+Hauser

Endress+Hauser AT5000 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline 500 HART Technische Daten

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung