Endress+Hauser Prosonic S FMU95 Bedienungs- und Montageanleitung

BA345F/00/en/04.07

Description of Instrument Functions

Prosonic S FMU95

Transmitter for 5 or 10 ultrasonic sensors

Prosonic S FMU95 - Description of Instrument Functions Table of Contents

Endress+Hauser 3

Table of Contents

1 Notes on use . . . . . . . . . . . . . . . . . . . . 4

1.1 Theory of operation . . . . . . . . . . . . . . . . . . . . . . . . . 4

1.2 First setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

2 The "level" menu. . . . . . . . . . . . . . . . 18

2.1 The "basic setup" submenu . . . . . . . . . . . . . . . . . . 18

2.2 The "extended calibration" submenu . . . . . . . . . . . 33

2.3 The "simulation" submenu . . . . . . . . . . . . . . . . . . . 35

3 The "safety settings" menu . . . . . . . . 36

3.1 "output echo loss" . . . . . . . . . . . . . . . . . . . . . . . . . 36

3.2 "delay echo loss" . . . . . . . . . . . . . . . . . . . . . . . . . . 37

3.3 "safety distance" . . . . . . . . . . . . . . . . . . . . . . . . . . 37

3.4 "in safety distance" . . . . . . . . . . . . . . . . . . . . . . . . 38

3.5 "reaction high temperature" . . . . . . . . . . . . . . . . . . 39

3.6 "defective temperature sensor" . . . . . . . . . . . . . . . . 39

4 The "output/calculations" menu . . . . 40

4.1 "analog input" (AI) . . . . . . . . . . . . . . . . . . . . . . . . . 40

4.2 "Profibus DP" . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

5 The "device properties" menu. . . . . . 42

5.1 The "operating parameters" submenu . . . . . . . . . . . 42

5.2 The "tag marking" submenu . . . . . . . . . . . . . . . . . . 42

5.3 The "language" submenu . . . . . . . . . . . . . . . . . . . . 43

5.4 The "password/reset" submenu" . . . . . . . . . . . . . . 44

6 The "system information" menu . . . . 45

6.1 The "device information" submenu . . . . . . . . . . . . 45

6.2 The "in/output info" submenu . . . . . . . . . . . . . . . . 47

6.3 The "min/max values" submenu . . . . . . . . . . . . . . 48

6.4 The "envelope curve" submenu . . . . . . . . . . . . . . . 50

6.5 The "error list" submenu . . . . . . . . . . . . . . . . . . . . 51

6.6 The "diagnsotics" submenu . . . . . . . . . . . . . . . . . . 52

7 The "display" menu . . . . . . . . . . . . . . 54

7.1 "display" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

7.2 "display format" . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

7.3 "back to home" . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

8 The "sensor management" menu . . . 57

8.1 "US sensor N" (N = 1 to 10) . . . . . . . . . . . . . . . . . 57

9 Operating menu . . . . . . . . . . . . . . . . . 60

9.1 "level" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

9.2 "safety settings" . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

9.3 "outputs/calculations" . . . . . . . . . . . . . . . . . . . . . . 62

9.4 "device properties" . . . . . . . . . . . . . . . . . . . . . . . . . 63

9.5 "system information" . . . . . . . . . . . . . . . . . . . . . . . 64

9.6 "display" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

9.7 "sensor management" . . . . . . . . . . . . . . . . . . . . . . . 66

10 Appendix. . . . . . . . . . . . . . . . . . . . . . . 67

10.1 System error messages . . . . . . . . . . . . . . . . . . . . . . 67

10.2 Default Block Configuration . . . . . . . . . . . . . . . . . . 73

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Notes on use Prosonic S FMU95 - Description of Instrument Functions

4Endress+Hauser

1 Notes on use

1.1 Theory of operation

1.1.1 Display and operating elements

L00-FMU95xxx-07-00-00-xx-001

(a): name of the parameter; (b): value of the parameter, including unit; (c): display symbols; (d): softkey symbol; (e): LED

indicating the operating state; (f): keys

FMU95

(e)

(d)

(f)

(a)

(b)

(c)

Prosonic S FMU95 - Description of Instrument Functions Notes on use

Endress+Hauser 5

Display symbols

LEDs

Symbol Meaning

Operating mode of the instrument

User

User parameters can be edited. Service parameters are locked.

Diagnosis

The service interface is connected.

Service

User and service parameters can be edited.

Locked

All parameters are locked.

Locking state of the currently displayed parameter

Display parameter

The parameter can not be edited in the current operating mode of the instrument.

Editable parameter

The parameter can be edited.

Scroll symbols

Scroll list available

Indicates that the list contains more parameters than can be represented on the display. By pressing

Vor Wrepeatedly, all parameters of the list can be accessed.

Navigation in the envelope curve display

Move left

Move right

Zoom in

Zoom out

LED indicating the operating state (pos. (e) in the figure)

green normal measuring mode; no error detected

red (flashing)

Warning:

An error is detected but the measurement continues. Reliability of the measured value is no longer

ensured.

red

Alarm:

An error is detected. The measurement is interrupted. The measured value assumes the value

specified by the user (parameter "output on alarm").

off supply voltage missing

Notes on use Prosonic S FMU95 - Description of Instrument Functions

6Endress+Hauser

Keys (softkey operation)

The function of the keys depends on the current position within the operating menu (softkey func-

tionality). The key functions are indicated by softkey symbols in the bottom line of the display.

General key combinations

The following key combinations do not depend on the menu position:

Symbol Meaning

Move downwards

Moves the marking bar downwards within a selection list.

Move upwards

Moves the marking bar upwards within a selection list.

Enter

• Opens the marked submenu, the marked parameter set or the marked parameter

• Confirms the edited parameter value

Previous parameter set

Reopens the previous parameter set within the submenu.

Next parameter set

Opens the next parameter set within the submenu.

Confirm selection

Selects the option of a selection list which is currently marked by the bar.

Increase value

Increases the active digit of an alphanumeric parameter.

Decrease value

Decreases the active digit of an alphanumeric parameter

Error list

Opens the list of all errors which are currently detected.

If a warning is present, this symbol flashes.

If an alarm is present, the symbol is displayed continuously.

Change Display

Change to the next page of measured values (only available if more than one pages of measured

values have been defined; see "display" menu)

Info

Opens the Shortcut Menu, which contains the most important information about the current state

of the instrument

Opens the Main Menu, which contains all parameters of the Prosonic S

Key combination Meaning

Escape

• While editing a parameter: Exit the editing mode without accepting the changes.

• Within the navigation: Move upwards to the previous layer of the menu.

Increase contrast

Increases the contrast of the display module.

Decrease contrast

Decreases the contrast of the display module.

Prosonic S FMU95 - Description of Instrument Functions Notes on use

Endress+Hauser 7

1.1.2 The operating menu

Structure of the menu

The parameters of the Prosonic S are organized in an operating menu (consisting of a main menu

and several submenus). Parameters which are related to each other are comprised in a common

parameter set. To simplify the navigation within the menu, a five-digit position code is displayed

with each parameter set.

L00-FMU90xxx-19-00-00-en-037

Identification of the parameter sets; A: submenu; B: number of the associated input or output; C: number of the parameter

set within the submenu

•Thefirst digit (A) specifies the submenu1):

–L: "level"

–A: "safety settings"

–O: "output/calculations"

–D: "device properties", "calibr. display" and "sensor management"

–I: "system information"

–S: "service" (only available if the service password has been entered)

Diagrams of the submenus can be found in the chapter "Operating menu".

•Thesecond digit (B) is used if the parameter set occurs several times within the Prosonic S (e.g.

for different inputs or outputs).

Example:

– L1002: level 1

– L2002: level 2

–...

– L9002: level 9

– LA002: level 10

If the parameter set occurs only once wihtin the Prosonic S, "X" is indicated at this position.

•Thelast three digits (C) specify the individual parameter sets within the submenu.

Locking

Locks the instrument against parameter changes.

The instrument can only be unlocked again by the keys.

Key combination Meaning

1) Depending on the instrument version, the installation environment and the selected operating mode, some of the submenus may not be present.

Notes on use Prosonic S FMU95 - Description of Instrument Functions

8Endress+Hauser

Parameter types

Display parameters

Editable parameters

L00-FMU90xxx-07-00-00-en-041

Parameters for which the symbol is dis-

played in the left bottom corner of the display

module, are either locked or display-only para-

meters.

L00-FMU90xxx-07-00-00-en-044

Parameters, for which the symbol is dis-

played in the left bottom corner of the display

module, can be entered for editing by pressing

The editing procedure depends on the type of

parameter:

• when entering a selection parameter, the

associated selection list appears (see below:

"Editing a parameter with selection list").

• when entering a numerical or alphanume-

rical parameter, the text and number editor

appears (see below: "Entering numbers and

characters").

Prosonic S FMU95 - Description of Instrument Functions Notes on use

Endress+Hauser 9

Navigation within the menu (Example)

L00-FMU90xxx-19-00-00-en-050

CX001

main menu

level

flow

safety settings

ralay/controls

…

LX001

level

L1002

level 1

Return

input: sensor 1

sensor sel.: autom.

detected: FDU91

tank shape: dome

medium proper: liq.

proc. cond.: stand.

5.00 m

level (LVL) 1

...

... basic setup

extended calibr.

simulation

L1004

LVL1 appl. para

tank shape: dome

medium proper: liq.

proc. cond.: stand.

L100A

tank shape

dome ceiling

horizontal cyl.

bypass

stilling well

L1004

LVL1 appl. para

L100A

tank shape

dome ceiling

horizontal cyl.

bypass

stilling well

L1004

LVL1 appl. para

tank shape: bypass

medium proper: liq.

proc. cond.: stand.

L1004

LVL1 appl. para

tank shape: bypass

medium proper: liq.

proc. cond.:stand.

L1005

LVL1 empty cal.

level 1

67.60 %

L1003

LVL1 sensor sel.

Main Menu

Submenus

Parameter Set

(here: with 3 parameters)

Editing a

parameter with

selection list

Notes on use Prosonic S FMU95 - Description of Instrument Functions

10 Endress+Hauser

Entering the menu

The navigation always starts from the main screen (measured value display2)). From there, the fol-

lowing menus can be opened by the keys:

L00-FMU95xxx-19-00-00-en-002

•shortcut menu

The shortcut menu is accessed via the "Info" key. It allows quick access to device information:

–tagmarking

– envelope curve: used to check the signal quality

– language: sets the display language

– device information: serial number, versions of software and hardware

– password/reset: used to enter the password or reset code

All parameters of the shortcut menu are contained in the main menu as well.

•main menu

The main menu is accessed via the "Menu" key. It contains all parameters of the Prosonic S. It

is divided into submenus. Some of the submenus consist of further submenus. Which submenus

are actually present, depends on the instrument version and the installation environment.

An overview of all submenus and parameters is given in the chapter "Operating menu".

•actual error

If the self-monitoring of the Prosonic S detects an error, the softkey symbol appears

above the middle key.

If the softkey symbol flashes, only "warnings" are present.

If the softkey symbol is displayed permanently, at least one "alarm" is present.

After pressing the key, a list of all currently present errors appears.

2) Note: Depending on the configuration, the appearance of the measured value display may be differemt from the example in the figure.

shortcut menu main menu

actual error

level

Warning 01802

safety settings

Alarm 01502

tag marking

envelope curve

language

device information

password/reset

...

FMU95

Andere Handbücher für Prosonic S FMU95

Inhaltsverzeichnis

Andere Endress+Hauser Sender Handbücher

Endress+Hauser

Endress+Hauser Liquisys M CXM 223 Bedienungsanleitung

Endress+Hauser

Endress+Hauser CM14 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Prosonic S FMU90 Bedienungs- und Montageanleitung

Endress+Hauser

Endress+Hauser Prosonic S FMU95 Bedienungsanleitung

Endress+Hauser

Endress+Hauser RMA42 Technische Daten

Endress+Hauser

Endress+Hauser TMD1000 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cerabar S PMC71 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar M PMD55 Bedienungsanleitung

Endress+Hauser

Endress+Hauser iTEMP TMT71 Montageanleitung

Endress+Hauser

Endress+Hauser Liquisys CUM 252 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquiline CM442R Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquiline M CM42 Bedienungsanleitung

Endress+Hauser

Endress+Hauser iTEMP TMT187 Bedienungsanleitung

Endress+Hauser

Endress+Hauser iTEMP HART DIN rail TMT112 Betriebsanleitung

Endress+Hauser

Endress+Hauser iTEMP TMT112 Bedienungsanleitung

Endress+Hauser

Endress+Hauser CM14 Bedienungsanleitung

Endress+Hauser

Endress+Hauser mycom COM 121 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquiline Compact CM82 Technische Daten

Endress+Hauser

Endress+Hauser AT1000 AT1 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Nivotester FTR525 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar M PMD55 Technische Daten

Endress+Hauser

Endress+Hauser Prosonic S FMU90 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquisys M CUM223 Bedienungsanleitung

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung