Eneo TVD-2080Z03IR Bedienungsanleitung
EN
User Manual
1/2.8” HD-TVI Dome, Fixed,
Day&Night, 1920x1080, 3x AF
Zoom, Infrared, 3D-DNR, 12/24V
TVD-2080Z03IR
Safety Precaution
03
FULL-HD AF-ZOOM CAMERA
CAUTION: TO REDUCE THE RISK OF ELECTIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
To prevent electric shocks and risk of fire hazards, do NOT use other than
specific power source.
Warning :
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
Caution :
Any changes or modifications in construction of this device which are not expressly
approved by the party responsible for compliance could void the user's authority
to operate the equipment.
Mains power quality should be that of a typical commercial environment. If the user
of the model requires continued operation during power mains interruptions, it is
recommended that the model be powered from an uninterruptible power supply
(UPS) or a battery.
The symbol is intended to alert the user to the presence of important
operating and maintenance(servicing) instructions in the literature
accompanying the unit.
The symbol is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
Safety Precaution
04
FULL-HD AF ZOOM CAMERA
NOTICE
The image used in this instruction manual are processed to help comprehension
and may differ from actual video of the camera.
Avoid installing areas where has shock or vibration which results in the problems.
Pay attention to safety when laying the connection cable and observe that the cable
is not subjected to heavy loads, kinks or damage and no moisture can get in.
Never open the device such as boards or lens.
The warranty becomes void if repairs are undertaken by unauthorized persons.
Maintenance and repair have to be carried out only by authorized service centers.
Use only a mild detergent to clean the housing.
The camera should never be operated beyond the technical specifications.
This can lead to destruction.
The camera should never be operated in water.
Contents
05
FULL-HD AF ZOOM CAMERA
Safety Precaution
p.03~04
Contents
p.05
Features
p.06~07
Composition
p.07
Dimensions
p.08
Part Names
p.09
Installation Instructions
p.10~13
Operating Instructions
p.14~29
Specifications
p.30
Features
Key Features
06
FULL-HD AF ZOOM CAMERA
• Full HD, 2Mega Pixel HD-TVI CAMERA, 1920x1080(30p/25p)
• TVI Video Transmission Distance over Coax.; 500M (RG59, 75Ω)
• Automatically removable IR Cut filter by Dual filter switcher
• Built-in f=3~9mm, F1.2~F2.1 Day & Night zoom lens
(Optical 3x Auto focus zoom / Digital 32x zoom)
• Focusing Status Indicator on Screen
- ★(Blue) Focusing in process
- ★(White) Focusing Completed
• True WDR(Wide Dynamic Range)
• Improved Noise figure with the enhanced 3D-NR
• Pointing Zoom which enables the flexible zooming at any area.
• Smart Motion Zoom in combining with Pointing Zoom.
• Preset Zoom
• Home Position setting
• Motion Detection, Privacy Mask, Defog, Sens-up(x32), BLC/HLC,
H/V/HV Flip, LSC(Lens Shade Compensation), Motion Deblur,
Pixel Defect Compensation, Lens Refresh, Lens Initializing Set
• ID / TITLE / ZOOM RATIO DISPLAY
• Enhanced Sensitivity by DSS technology
• Top performance at low light sensitivity (Sens-up On)
• OSD menu & Video sub-out for easy installation & maintenance.
• Circuit protection against faulty connection in power polarity
• Isolated power supply against ground loop problem
• Remote control via RS-485 (Pelco-D/P)
• UTC Control through HD-TVI DVR
• Built-in 2pcs High-power LED
• Double side Anti-Scratch Hard coated clear bubble
• Flush mount (option: Surface mount and various adaptors)
• Built-in 3-Axis Gimbal
• IP67 / IK10 Protection
• AC24/DC12V Dual power
General Description
• With ICR mechanism,
- Enhances its sensitivity about 10x at night time
- Can accepts the infrared light
• With 24VAC/12VDC dual power design,
- Offers the flexibility of installation
- Ensures the reliability
This camera realizes the natural and crisp image as you see the scene in front
of you by adopting Auto Focus Full HD(1920x1080p) camera module.
Highly detailed pictures can be achieved and color reproducibility deserves
attention.
Features
07
FULL-HD AF ZOOM CAMERA
Composition
Mounting Template
Cable Signal
Sticker
Operating
Instruction
Torque Wrench:
3mm (1pc)
Video Sub-out
Cable (1pc)
Mounting Screw:
4 x 30mm (3pcs)
Plastic Anchor:
6 x 30mm (3pcs)
Dome Camera
Wiring Connector
(1pc)
Connector fixing Screw:
2.5 x 5mm (1pc)
Dimensions
08
FULL-HD AF ZOOM CAMERA
Ø140
119
PCD Ø120
Ø102
Ø140
3-Ø4.2
82
(unit : mm)
Part Names
09
FULL-HD AF ZOOM CAMERA
BUBBLE DOME
3-AXIS GIMBAL
DOME COVER
SAFTY WIRE
FLUSH MOUNT
ZOOM LENS
OSD CONTROL
JOY STICK
POWER CABLE
VIDEO (BNC)
POWER CABLE
[ BOTTOM VIEW ]
POWER SUPPLY
CONNECTOR
POWER
CABLE
Installation Instructions
10
FULL-HD AF ZOOM CAMERA
1. Locate the mounting template at the installation position and drill the ceiling
or wall if needed.
2. Open the dome cover by loosening screws(4x12mm). Use the torque wrench
supplied.
3. Set the camera’s viewing angle.
4. Put the dome cover to the dome base unit and tighten the assembly screws.
- Place the dome base unit on pre-drilled position and fix it through using mounting
screws (4x30mm).
- Route the Power cable to the connecting place.
• Surface mount
• Pole mount adaptor
• Tilted mount
• Wall mount
(Requires additional
Surface mount)
• Tilted junction mount
■ Optional Mounting Accessories
Mounting Screw
(4x30mm)
Plastic Anchor
(6x30mm)
Torque
Wrench
Inhaltsverzeichnis
Andere Eneo Sicherheitskamera Handbücher
Eneo
Eneo IPD-72A0003M0B Bedienungsanleitung
Eneo
Eneo IPD-68M3611P5A Bedienungsanleitung
Eneo
Eneo GXB-1720MIR Bedienungsanleitung
Eneo
Eneo ICB-65M2713M5A Bedienungsanleitung
Eneo
Eneo VKC-13100/IR-2810 Bedienungsanleitung
Eneo
Eneo IPD-52M2712M5A Bedienungsanleitung
Eneo
Eneo VKC-1366 Bedienungsanleitung
Eneo
Eneo IPB-62M2713MAA Bedienungsanleitung
Eneo
Eneo PTB-1008F Series Bedienungsanleitung
Eneo
Eneo VKCD-12100F2812IR Bedienungsanleitung
Eneo
Eneo VKC-1376/12-24 Bedienungsanleitung
Eneo
Eneo IPB-72A0010M0A Bedienungsanleitung
Eneo
Eneo MSM-42F0037MPA Bedienungsanleitung
Eneo
Eneo MPD-68V2713P0A Bedienungsanleitung
Eneo
Eneo VKC-1327A/WDDG1 Bedienungsanleitung
Eneo
Eneo NXD-980IR37P B Montageanleitung
Eneo
Eneo ENC-1003L Bedienungsanleitung
Eneo
Eneo IPC-52A0030P0A Bedienungsanleitung
Eneo
Eneo IPC-52A0003M0A Bedienungsanleitung
Eneo
Eneo GLC-1601 Bedienungsanleitung
